1. Unbuckle the tripod's lower belt and release the
extension clamp screws.
2. Extend the tripod-legs until the tripod head is at your
eye level and fasten the extension clamp screws.
3. Spread the tripod-legs so that the leg-tips form a
regular triangle
4. Make sure the tripod head is approximately level, and
stamp the tripod-feet firmly into the ground.
CAUTION: Please keep the tripod head as level
as possible.
5. Set the automatic level onto the tripod head and
tighten the center screw.
6. Adjust the three leveling screws to get the bubble in
the center.
