FDS FD151CV-QUAD Manuale utente

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 1 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation and Operation Manual

FD151CV-QUAD

15.1” Low-Profile LCD with Quad-Screen Capability

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 2 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Table of Contents

General Information....................................................................................................................3

Front View.....................................................................................................................................3

Additional Information ..............................................................................................................3

Specifications................................................................................................................................4

Installation Instructions .............................................................................................................4

Power..............................................................................................................................................4

Wiring Suggestions .....................................................................................................................5

S-Video/Composite & Audio Wiring.......................................................................................5

VGA Wiring ..................................................................................................................................6

Power & Ground Wiring ............................................................................................................7

Power/Video..................................................................................................................................8

Pinout DB-15.................................................................................................................................8

Operation Instructions................................................................................................................9

Button Controls ..........................................................................................................................10

Remote Control Buttons ..................................................................................................... 10-11

Technical Drawing.....................................................................................................................12

Technical Support......................................................................................................................13

Instructions for Continued Airworthiness ...........................................................................13

Warranty Information ...............................................................................................................14

Log of Revisions.........................................................................................................................15

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 3 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

General Information

The FD151CV-QUAD is a 15.1” Low-Profile LCD which has features that allow

installation in the smallest of mounting areas with the minimum of interface equipment.

Built with retrofit aircraft integration in mind, this display can switch between three video

input sources using an infrared remote.

Front View

Additional Information

The FD151CV-QUAD utilizes a state of the art digital video decoding chipset for the

analog video input. The video sources in order of picture quality are VGA (computer

graphics like moving maps), and Composite Video (DVD, camera or VCR). Both NTSC

and PAL formats are auto-detected.

The FD151CV-QUAD can also be connected to existing video switchers and just take a

composite video input from a selector interface box. In this case multiple input sources

can be selected and displayed on the monitor. You would only use the IR remote to set

up the screen during installation.

The FD151CV-QUAD is made of all metal components. DO-160 testing has been

completed and is available upon request.

The LCD is protected with a .060” Lexan lens to prevent scratching of the LCD.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 4 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Specifications

Display Type

15.1” TFT Color LCD

Display Color

16.7 Million Colors

Screen Resolution

VGA 1024 x 768

Brightness

400 cd/m2

Dimensions

14.14”(W)x11.95”(H)x2.5”(D)

Display Size

11.89”(W)x8.91”(H)

Weight

7lbs 5 oz

Power

28V DC @ 1.5AMPS

PC & Video Input

VGA (High Density DB-15 Connector),

Composite (4)

Video Type Supported

NTSC/PAL

Screen Control

On-Screen Display Menu

Materials

Aluminum

DO-160 Testing

Section 21, Category B

Remote Control

IR, included

Pixel Pitch

0.3mm x 0.3mm

Installation Instructions

All cabin entertainment equipment, such as the FD151CV-QUAD, should be installed on

a non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch

be installed in the cockpit so that the pilot can de-energize the entertainment system

should it become necessary.

For mounting specifications refer to drawing at the back of the manual.

(NOTE: Removing the front cover does not void the warranty.)

When installed, at least ¼” gap should be maintained along the top and along the bottom

of the unit to allow for convection cooling.

Power

This is a 28VDC monitor that requires 1.5 AMPS (42 Watts) of power to operate. The unit

turns on automatically upon power application.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 5 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Wiring Suggestions

All shields should be grounded to the connector at the source, and floating at the display.

Avoid routing video wiring parallel to:

AC wiring

Strobe wiring

DC motor supply cables

Inverter cabling

Or any other potential noise source.

S-Video/Composite and Audio Wiring

Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax,

P/N V76261. This is a lightweight, flexible, and low signal loss cable which meets FAA

flammability requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).

Similar aviation coaxial cable can be used from other vendors, as well.

Some aircraft are prone to AC noise - we recommend adding to the composite source a

75 Ohm video isolation transformer such as Deerfield Laboratory, Inc. Part No. 162-1

(www.deerfieldlab.com, (650) 632-4090). In most cases this should be added to the video

output of the source.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 6 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

VGA Wiring

Recommended cable for VGA purpose is Carlisle P/N 453005. This is a single shielded

cable containing 5 separate coaxial cables, color-coded to match the functions of the

wires.

We recommend coax cables be terminated using solder sleeve coaxial cable terminators

such as Raychem Part Number CWT-4174-W122-5/9.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 7 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power and Ground Wiring

This is a 28VDC monitor that requires 1.5 amps of power to operate. To operate properly

this monitor requires an input voltage of 18-29VDC.

The rated current of the equipment and associated voltage drop should be taken into

consideration when selecting wire gauge. The following example is based on an install

with a 28VDC power system and a total of 50 feet of wire between the circuit breaker,

monitor and ground.

Example: 22awg wire has 16.2 Ohms per 1000 feet, this equates to .81 Ohms for 50

feet. 1.5 Amps of current on .81 Ohms will drop 1.22 Volts.

Resistance of Wire Type M22759/16-**

(** = Gauge)

Gauge (AWG)

OHMS/1000’

26.20

16.20

9.88

4.81

2.02

1.26

.701

Also, use short heavy gauge wire and a clean tight connection for ground.

It is the installer’s responsibility to understand the product’s requirements to install the

product in compliance with industry standards and safety.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 8 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power/Video

Pin out for P1 (High Density DB-15 Receptacle)

There is one High Density DB-15 on the rear of the display, which connects Power,

Composite Video #1, Composite Video #2 and VGA connections.

Part Numbers for DB-15 connectors, manufactured by Tyco or Amp.

High density, D-sub, 15 contact receptacle (female) P/N 748565-1

HD15F pins P/N M39029/57-354

Number

Description

28VDC Power

28VDC Ground

Composite Video 1 –Signal

Composite Video 1 –Shield

Composite Video 2 –Signal

Composite Video 2 –Shield

N/C

Red Video (Pin 1 on Standard VGA)

Green Video (Pin 2 on Standard VGA)

Blue Video (Pin 3 on Standard VGA)

Red Ground (Pin 6 on Standard VGA)

Green Ground (Pin 7 on Standard VGA)

Horizontal Sync (Pin 13 on Standard VGA)

Vertical Sync (Pin 14 on Standard VGA)

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 9 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Operation Instructions

The FD151CV-QUAD is continuously on but can be de-energized by removing power

from the entertainment system. No pilot or aircrew action is necessary during flight or

ground operation.

The passengers will be able to change the video output from the FD151CV-QUAD using

the video source select button on the display, or remotely throughout the cabin with the

included IR remote. Point the IR remote at the top of the LCD to make changes.

When applying 28VDC power, the display will turn on and look for a valid input on the

last known source. If no input is found, the display will go to standby mode. Pressing the

Select button will select new video input.

Document Number:

MAN –FD151CV-QUAD

Rev:

Revision Date:

05/04/2017

Page 10 of 15

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Button Controls

Located at the bottom of the FD151CV-QUAD are 10 buttons.

The functions are as follows:

BUTTON

DESCRIPTION

QUAD

Puts monitor into quad-screen mode.

Displays Input 1 as full-screen.

Displays Input 2 as full-screen.

Displays Input 3 as full-screen.

Displays Input 4 as full-screen.

Opens the menu, changes between selections.

Press while in menu- Adjust selection UP.

Press out of menu –Brightness (Use up or down to

change.)

Press while in menu- Adjust selection DOWN.

Press out of menu –Contrast (Use up or down to

change.)

Select video source with the following order: Composite

1, Composite 2 and RGB (PC).

Pressing will turn the monitor ON or OFF from Standby

mode.

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione