FDS FD215CV-C-7 Manuale utente

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 1 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation and Operation Manual

FD215CV-C-7

21.5” Widescreen HD Display

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 2 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Table of Contents

General Information......................................................................................................................3

1. Front View..........................................................................................................................3

2. Additional Information....................................................................................................3

Specifications.............................................................................................................................4

Installation Instructions ..........................................................................................................4

Power ...........................................................................................................................................4

Wiring Suggestions ..................................................................................................................5

Power and Ground Wiring.......................................................................................................6

Rear View with Connectors ....................................................................................................7

Power/Video...............................................................................................................................8

VGA Video Pin out ...................................................................................................................9

DB-9 Pin out........................................................................................................................ 10-11

How to Change from VGA (Analog) to DVI (Digital) Inputs ..................................... 12-13

Operation Instructions...........................................................................................................14

Button Control..........................................................................................................................15

Quad Screen or Full Screen............................................................................................... 16-21

Technical Drawing..................................................................................................................22

Technical Support...................................................................................................................23

Instructions for Continued Airworthiness ........................................................................23

Warranty ...................................................................................................................................24

Log of Revisions......................................................................................................................25

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 3 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

General Information

The FD215CV-C-7 is a special mission HD monitor which is designed to be mounted in a

standard 19-inch rack. This display includes quad screen vide with picture in picture (PIP)

Capability.

Front View

Additional Information

The FD215CV-C-7 utilizes a state of the art digital video decoding chipset for all video inputs.

Three video sources are activated: HD-SDI, with input from an internal quad board for viewing

up to 4 HD Video inputs, DVI, and VGA (for computer graphics i.e. moving maps).

The LCD is protected with a .060” non-glare Lexan lens to prevent scratching of the LCD, and

to meet stringent FAA abrasive load criteria.

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 4 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Specifications

Display Type

21.5” TFT Color LCD

Display Color

16.7 Million Colors

Screen Resolution

1920 X 1080

Screen Control

On Screen Display Menu

Brightness

300 cd/m2

Dimensions

20.0”(W) x 14.52”(H) x 2.78”(D)

Display Size

18.82”(W) x 10.61”(H)

Weight

10 lbs 13 oz

Operating Temperatures

0-50º C (32-122 F)

Power

28V DC @ 3 Amps

PC & Video Input

Analog RGB/VGA, HD-SDI, Digital (DVI-D)

Video Type

NTSC/PAL

Viewing Angle

170° Horizontally

160° Vertically

Materials

Aluminum

Installation Instructions

All cabin equipment, such as the FD215CV-C-7, should be installed on a non-essential bus and

have a dedicated circuit breaker.

The FD215CV-C-7 is designed to mount into a standard electronics rack using (4) 10-32 Machine

screws. See installation drawing on page 16 for measurement details.

Power

This is a 28VDC monitor that requires 3.0 Amps of power to operate. The unit turns on

automatically upon power application.

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 5 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Wiring Suggestions

Shields used on wire bundles and power should be grounded to the connector at the source and

left floating at the display. Shields for USB, SDI data, and video should be connected at both

ends.

Avoid routing video wiring parallel to:

AC wiring

Strobe wiring

DC motor supply cables

Inverter cabling

Or any other potential noise source.

We recommend coax cables be terminated using solder sleeve coaxial cable

terminators such as Raychem Part Number CWT-4174-W122-5/9.

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 6 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power and Ground Wiring

This is a 28VDC monitor that requires 3 amps of power to operate. To operate properly this

monitor requires an input voltage of 24-29VDC.

The rated current of the equipment and associated voltage drop should be taken into

consideration when selecting wire gauge. The following example is based on an install with a

28VDC power system and a total of 50 feet of wire between the circuit breaker, monitor and

ground.

Example: 22awg wire has 16.2 Ohms per 1000 feet, this equates to .81 Ohms for 50 feet. 3 Amps

of current on .81 Ohms will drop 2.43 Volts.

Resistance of Wire Type M22759/16-**

(** = Gauge)

Gauge (AWG)

OHMS/1000’

26.20

16.20

9.88

4.81

2.02

1.26

.70

Also, use short heavy gauge wire and a clean tight connection for ground.

It is the installer's responsibility to understand the product's requirements to install the product

in compliance with industry standards and safety.

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 7 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Rear View with Connectors

CONTROL

PORT

VGA INPUT

DVI-D INPUT

HDDSI OUT

SDI OUTPUT

(FROM QUAD)

BOARD)

SDI INPUTS (4)

28 VDC INPUT

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 8 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power/Video

Pin out for 28V PWR –D38999 connector (supplied)

Connector P/N: D38999/26FB5SA or Equivalent

Crimp Contacts P/N: M39029/56-351 or Equivalent

MATING FACE

Number

Description

28VDC Power

28VDC Ground

N/C

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 9 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

VGA Video

Accepts Industry Standard VGA connection

Number

Description

Red Video

Green Video

Blue Video

Reserved

H-Sync Ground

Red Return

Green Return

Blue Return

+5V DC

V-Sync Ground

Reserved

Horizontal Sync

Vertical Sync

Reserved

Document Number:

MAN –FD215CV-C-7

Rev:

Revision Date:

01/10/2017

Page 10 of 25

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Pinout for DB-9

Part Numbers for DB-9 connectors, manufactured by Tyco or Amp.

D-sub, 9 contact receptacle (female) P/N 205203-1

DB9F pins P/N M39029/63-368

Wiring Diagram

Number

Description

+5V USB POWER (RED)

DATA + (GREEN)

DATA - (WHITE)

POWER RETURN (BLACK)

CHASSIS GROUND (SHIELD)

VGA/DVI JUMPER*

N/C

*Add jumper wires for DVI video selection. Remove jumper wires for VGA video selection.

Maximum jumper wire length is 2”.

Pin out for HD-SDI Inputs

(Standard BNC –75 OHM) –31-242

Description

Center

Video Signal

Shell

Video Return

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione