FDS FD201CV-C-1 Manuale utente

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 1 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation and Operation Manual

FD201CV-C-1

20” LCD Display

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 2 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Table of Contents

General Information....................................................................................................................3

Front View.....................................................................................................................................3

Additional Information ..............................................................................................................3

Specifications................................................................................................................................4

Installation Instructions .............................................................................................................4

Power..............................................................................................................................................4

Wiring Suggestions .....................................................................................................................5

S-Video /Composite and Audio Wiring ..................................................................................5

VGA Wiring ..................................................................................................................................6

Power and Ground Wiring.........................................................................................................6

Power/Video.............................................................................................................................. 7-8

Operation Instructions................................................................................................................9

Button Control ..............................................................................................................................9

Composite Video Control Buttons .........................................................................................10

Installation Drawings ......................................................................................................... 11-13

Technical Support......................................................................................................................14

Instructions for Continued Airworthiness ...........................................................................14

Warranty ......................................................................................................................................15

Log of Revisions.........................................................................................................................16

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 3 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

General Information

The FD201CV-C-1 is a special mission which has features that allow installation in a

standard rack mount configuration. There are 16 (sixteen) line interface buttons that

interface with the mission computer.

Front View

Additional Information

The FD201CV-C-1 utilizes a state of the art digital video decoding chipset for the analog

video input. Two video sources are activated: the VGA (computer graphics i.e. moving

maps) and composite video (i.e. camera inputs).

The LCD is protected with a .060” non-glare Lexan lens to prevent scratching of the LCD,

and to meet stringent FAA abrasive load criteria.

The high-definition monitor also features dual USB 2.0 powered ports to allow for quick

and easy access to files via thumb drive. Each port supplies up to 500ma to power

external devices. It also has 16 buttons which can be programmed to meet the operator’s

needs.

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 4 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Specifications

Display Type

20.1” TFT Color LCD

Display Color

16.7 Million Colors

Screen Resolution

UXGA 1600x1200

Brightness

300 cd/m2

Dimensions

19.0”(W) x 15.7”(H) x 2.00”(D)

Display Size

16.1”(W) x 12.0”(H)

Weight

13 lbs 7 oz

Power

28V DC @ 2.2 Amp

PC & Video Input

Analog RGB, Composite

Video Type Supported

VGA, NTSC

Screen Control

On Screen Display Menu

Viewing Angle

176on Both Axis

Materials

Aluminum

DO-160 Testing

DO-160E, Sec 21, Cat B

Installation Instructions

All cabin equipment should be installed on a non-essential bus and have a dedicated

circuit breaker. It is a requirement that a switch be installed in the cockpit so that the pilot

can de-energize the system should it become necessary.

Power

This is a 28VDC monitor that requires 2.2 Amps of power to operate. The unit turns on

automatically upon power application.

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 5 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Wiring Suggestions

All shields should be grounded to the connector at the source, and floating at the display.

Avoid routing video wiring parallel to:

AC wiring

Strobe wiring

DC motor supply cables

Inverter cabling

Or any other potential noise source.

S-Video/Composite and Audio Wiring

Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax,

P/N V76261. This is a lightweight, flexible, and low signal loss cable which meets FAA

flammability requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).

Similar aviation coaxial cable can be used from other vendors, as well.

Some aircraft are prone to AC noise - we recommend adding to the composite source a

75 Ohm video isolation transformer such as Deerfield Laboratory, Inc. Part No. 162-1

(www.deerfieldlab.com, (650) 632-4090). In most cases this should be added to the video

output of the source.

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 6 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

VGA Wiring

Recommended cable for VGA purpose is ECS P/N 453005. This is a single shielded

cable containing 5 separate coaxial cables, color-coded to match the functions of the

wires.

We recommend coax cables be terminated using solder sleeve coaxial cable

terminators such as Raychem Part Number CWT-4174-W122-5/9.

Power and Ground Wiring

20 AWG wire is recommended for Power and Ground applications.

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 7 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power/Video

Pin out for FD201CV-C-1

1, 2, 3, 4 –Standard NTSC

(Shield + Signal)

5, 6 –See pinouts below

7 –Standard USB (Type B)

Pin out for VGA/S-VID (5)

Number

Description

N/C

S-Video –Y Signal

S-Video –Y Shield

S-Video –C Signal

S-Video –C Shield

Red Signal (Pin 1 on Standard VGA)

Green Signal (Pin 2 on Standard VGA)

Blue Signal (Pin 3 on Standard VGA)

Red Return (Pin 6 on Standard VGA)

Green Return (Pin 7 on Standard VGA)

Horizontal Sync (Pin 13 on Standard VGA)

Vertical Sync (Pin 14 on Standard VGA)

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 8 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Pin out for PWR (6)

Number

Description

28VDC Power

28VDC Ground

28VDC Power

28VDC Ground

N/C

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 9 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Operation Instructions

The FD201CV-C-1 is continuously on but can be de-energized by removing power from

the entertainment system. No pilot or aircrew action is necessary during flight or ground

operation.

The operator will be able to change the video output from the FD201CV-C using the

video source select button on the display.

When applying 28VDC power, the display will turn on and look for a valid input on the

last known source. If no input is found, the display will go to standby mode. Pressing the

Select button will select new video input.

Button Controls

Located on the front bottom left of the FD201CV-C-1 are 8 buttons.

BUTTON

DESCRIPTION

PWR

Turns ON/OFF the system.

Activates the OSD menu or goes to previous menu.

AUTO

Auto-adjustment in RGB.

Moves the highlight icon up to the function that user

wants.

Moves the highlight icon down to the function that user

wants.

Decreases the adjustment of the selected function.

Increases the adjustment of the selected function.

SCE

Selects the Input Signal among analog RGB/S-

Video/Composite.

Document Number:

MAN –FD201CV-C-1

Rev:

Revision Date:

05/05/2017

Page 10 of 16

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Composite Video Control Buttons

Four composite video inputs can be viewed through the FD201CV-C-1. The operator can

choose between a quad screen of four composite images at one time, or a full screen

image of any one of the composite inputs.

The control buttons for the composite video inputs are located on the lower right front of

the bezel.

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione