FDS FD320CV Manuale utente

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 1 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation and Operation

Manual

FD320CV

FD320CV VER HD

FD320CV VER HDSDI

FD320CV VER HDSDI-CAN

32” High-Definition Widescreen LCD

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 2 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Specifications

Display

Panel Technology

32” TFT Color LCD

Screen Resolution

1920 x 1080

Brightness

350 cd/m² Typical

Viewing Angle

178° on both axes

Power

28VDC @ 2.3 Amps

Inrush Current

11.4A for 280µs

7.4A within 2.6ms

2.3A after 3ms

Environmental Conditions

Operating temperature

0°C to 50°C

Storage Temperature

-20°C to 60°C

Dimensions

External

31.00” (W) x 18.70” (H) x 2.55” (D)

Active Screen Size

31.5” diagonal

Weight

25.5 lbs.

Features

Remote Control

Infrared (Included)

Screen Control

On Screen Display Menu

DO-160 Testing

Section 7, Category B

Section 21, Category B

Serial Communication

RS-485

(FD320CV VER HD Only)

CAN Bus

(FD320CV VER HDSDI-CAN Only)

Video Inputs

FD320CV

FD320CV VER

FD320CV VER HDSDI

FD320CV VER HDSDI-

CAN

(1) Composite

(1) S-Video

(2) HDMI

(1) HDSDI (1.5G)

(1) VGA

(1) S-Video

(1) HDSDI loop thru output

(1) VGA

(1) S-Video

(1) VGA

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 3 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Table of Contents

General Information/Additional Information/Installations .............................................. 4

Rear Connector Orientation .............................................................................................. 5

Power .................................................................................................................................. 5

Wiring Suggestions............................................................................................................ 5

S-Video/Composite and Audio Wiring.............................................................................. 6

VGA Wiring ......................................................................................................................... 7

HDMI .................................................................................................................................... 8

Power and Ground Wiring ................................................................................................. 9

Command sets for controlling the monitors with serial numbers starting w/

11XXXXXXXX (10 digits) and below:................................................................................10

Command sets for controlling the monitors with serial numbers starting w/

12XXXXXXXX (10 digits) and above: ...............................................................................11

RS-485 Wiring and RS-485 Network ................................................................................12

Setting ID Numbers for Multiple Monitors:......................................................................12

Operation Instructions......................................................................................................13

Button Controls .................................................................................................................14

Remote Control Buttons ...................................................................................................15

Technical Drawing.............................................................................................................16

Technical Drawing.............................................................................................................17

Technical Support .............................................................................................................18

Instructions for Continued Airworthiness.......................................................................18

Limited Warranty ...............................................................................................................19

Log of Revisions ...............................................................................................................20

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 4 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

General Information

The FD320CV series are 32” High-Definition Widescreen LCD which have features that

allow installation in the smallest of mounting areas with minimum interface equipment. Built

with retrofit aircraft integration in mind, these displays can switch between video input

sources using an infrared remote.

Additional Information

The FD320CV series utilizes a state of the art digital video decoding chipset for the analog

video input.

The FD320CV series can also be connected to existing video switchers and use only a

single video input from a selector interface box. In this case, the IR remote will only be used

to set up the screen after installation e.g. adjust brightness, contrast, etc.

The LCD is protected with a .125” polycarbonate lens. The purpose of this lens is to

prevent scratching of the LCD and reduce glare. The enclosure for the FD320CV series is

aluminum. DO-160 testing has been completed and the report is available upon request.

Installation Instructions

All cabin entertainment equipment should be installed on a non-essential bus and have a

dedicated circuit breaker. It is a requirement that a switch be installed in the cockpit so that

the pilot can de-energize the entertainment system should it become necessary.

Refer to ICD-212, in this manual, for mounting provisions.

It is recommended that you leave at least ½ inch of space around the rear, top and bottom

of the display for the exhaust fan to have circulating air.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 5 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Rear Connector Orientation

The rear connector of this monitor can be mounted horizontally (connector perpendicular to

rear of monitor) or vertically (connector perpendicular to bottom of monitor) in order to give

you the most convenient mounting options. By default, this monitor's connector ships in the

rear/horizontal position. FDS Avionics Corp. will ship the unit with the optional

bottom/vertical mounting connector configuration if specified at the time of order; contact

your local sales representative for assistance. It is possible to change the connector

orientation at the time of installation. For instructions on how to change the connector

orientation please call FDS Avionics Corp. at +1 (470) 239-7400 and ask for Technical

Support.

Power

This is a 28VDC monitor that requires 2.3 Amps of power to operate. The unit turns on

automatically upon power application.

Wiring Suggestions

All shields should be grounded to the connector at the source, and floating at the display.

Avoid routing video wiring parallel to:

•AC wiring

•Strobe wiring

•DC motor supply cables

•Inverter cabling

•Or any other potential noise source.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 6 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

S-Video/Composite and Audio Wiring

The recommended cable for s-video/composite and audio purposes is PIC 75ΩCoax, P/N

V76261. This is a lightweight, flexible and low signal loss cable which meets FAA

flammability requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).

Similar aviation coaxial cable can be used from other vendors as well.

Some aircraft are prone to AC noise - we recommend adding to the composite source a 75Ω

video isolation transformer. In most cases this should be added to the video output of the

source.

We recommend coax cables be terminated using solder sleeve coaxial cable terminators.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 7 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

VGA Wiring

Recommended cable for VGA purpose is ECS P/N 453005. This is a single shielded cable

containing 5 separate coaxial cables, color-coded to match the functions of the wires.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 8 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

HDMI

HDMI (High-Definition Multimedia Interface) defines the protocol and electrical

specifications for the 19 signalling, pin-out, electrical and mechanical requirements of cable

and connectors used for transmitting High-Definition content. The Type A HDMI connector

(shown below) has 19 pins with bandwidth to support all SDTV, EDTV and HDTV modes.

The plug’s outside dimensions are 13.9 mm wide by 4.45 mm high.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 9 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power and Ground Wiring

The rated current of the equipment and associated voltage drop should be taken into

consideration when selecting wire gauge. The following example is based on an

installation with a 28VDC power system, 1.5-amp equipment load and a total of 50 feet of

wire between the circuit breaker, monitor and ground.

Example: 22awg wire has 16.2Ωper 1000 feet, this equates to .81Ω for 50 feet. 1.5 Amp

of current on .81Ωwill drop 1.22 Volts.

Resistance of Wire Type M22759/16-**

(** = Gauge)

Gauge (AWG)

Ω / 1000’

26.20

16.20

9.88

4.81

2.02

1.26

.701

Also, use short heavy gauge wire and a clean tight connection for ground. It is the installer's

responsibility to understand the product's requirements in order to install the product in

compliance with industry standards and safety.

Document Number:

MAN – FD320CV-X

Rev:

Revision Date:

09/23/2019

Page 10 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Command sets for controlling the monitors with serial numbers starting w/

11XXXXXXXX (10 digits) and below:

Below are the command sets to control the power, source selection and backlight

brightness. The 13 characters below are shown in hexadecimal. The communication

system must be set up for 19200 Baud, no parity, 8 bits of data and 1 stop bit.

POWER

POWER OFF

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x01

0x00

POWER ON

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x01

0x00

SOURCE SELECTION

VGA

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x02

0x00

Composite

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x01

0x02

0x00

S-Video

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x02

0x00

HDMI 1

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x06

0x02

0x00

HDMI 2

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x07

0x02

0x00

BACKLIGHT

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x03

0x00

Increment

by 1% 0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00 0x00 Increment

by 0x01 0x03 0x00 CR

100%

0xBE 0xEF 0x02 0x06 0x00 0x1F 0xD1 0x26 0x00

0x00

0x64

0x03

0x00

Notes

Notes:

1. The first nine characters will remain the same for any command.

2. For connecting multiple monitors to one controller; the number can be set to 0x00 to

control all monitors at once, 0x01 to control monitor number 1, 0x02 monitor number 2

and so on until 0x63 for monitor number 99.

3. The number will change depending on command.

4. Identifier for the group of commands.

5. All commands need to end with a Carriage Return

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione