Flashforge Adventurer 4 Pro Manuale utente

用户使用手册

Adventurer 4 Pro / 冒险家4 Pro

User Guide

EN/CN-A04

中文P32

本手册仅适用于闪铸科技冒险家4 Pro 3D打印机

This guide is only applicable to FLASHFORGE Adventurer 4 Pro 3D printer.

Scan the QR code to view the unboxing

video, which is also accessible on the

USB ﬂash drive.

扫码观看开箱视频

或打开U盘观看

CONTENTS

Notice

Parameters

Chapter 1 Adventurer 4 Pro

1.1 - Component Introduction

1.2 - Packing List

Chapter 2 Unpacking

Chapter 3 Software Installation

Chapter 4 Equipment Preparation

Chapter 5 First Printing

Chapter 6 User Interface Introduction

Chapter 7 Q&A

Chapter 8 Help and Support

6.1 - Build

6.2 - Prepare

6.2.1 - Preheat

6.2.2 - Filament

6.3 - Settings

6.4 - Maintain

6.4.1 - Upgrade

6.4.2 - Log

6.4.3 - Calibration

6.4.4 - Change Extruder

6.4.5 - Maintain

Notice

Safety Notice: please read and strictly follow all the

safety warnings and notice below.

Work Environment Safety

Keep your work place tidy.

Do not operate the device in the presence of flammable liquids, gases or dust.

The high temperature generated by equipment operation may react with

combustible gases, liquids, and airborne dust, thus causing fire.

Keep the device out of children's and untrained people's reach.

Electrical Safety

Note: Every printer has been tested before leaving the factory. If there are some ﬁlament

residues in the extruder or some tiny scratches on the build plate, it is normal and

won’t aﬀect the printing quality.

Always use the device with a properly grounded outlet. Do not reﬁt the device's plug.

Ungrounded / improperly grounded / reﬁtted plugs will increase the risk of leakage

of electricity.

Do not expose the device to damp or hot-sun environment. Humidity will increase the

risk of electric leakage. Exposure to sunlight will accelerate the aging of plastic parts.

In case of device damage, please use the power cord provided by Flashforge.

Avoid using the device during a thunderstorm.

In case of uncertain accidents, please unplug the device if you do not use it for long.

When grounding, plug the power cord into the three-in-one socket and connect to the

external grounding wire through the grounding terminal of the three-in-one socket.

Check and replace the fuse: To prevent electric shock, please be sure to turn oﬀ the

power switch and unplug the power cord before checking or replacing the fuse.

Replace the fuse: Open the fuse box of the three-in-one socket and replace the fuse

with the fuse of 5*20, T10AL250V speciﬁcation.

Environment Requirements

Placement Requirements

The device must be placed in a dry and ventilated environment. The distance of

the left, right and back side space should be at least 20cm, and the distance of the

front side space should be at least 35cm. Device storage temperature: RT 0-40℃.

Temperature: RT 15-30℃; moisture: 20%-70%.

Cautions

Keep the inside of the device clean and tidy. Do not place metal objects into the

chute at the bottom of the platform.

Please clean up the filament debris in time. It is recommended to operate this

outside the equipment.

Any modifications to the device will invalidate the guarantee.

Lower the build plate before loading/unloading filament. The distance between

the nozzle and build plate should be kept for at least 50mm.

Operate the device in a well-ventilated environment.

Never use the device for illegal activities.

Never use the device to make any food containers.

Never put the prints into your mouth.

Personal Safety

Do not touch the nozzle and build plate during printing.

Do not touch the nozzle and plate after printing to avoid high-temperature scalds

or mechanical damage!

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts.

Do not operate the device while you are tired or under the influence of drugs,

alcohol or medication.

Hot surface

Do not touch

Warning crushing

of hands

Keep this area

clear

Keep body parts away

from moving parts

Legal Notice

All the information in this document is subject to any amendment or change

without the official authorization from Flashforge.

FLASHFORGE MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS

DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: [1] This device may not cause harmful interference,

and [2] this device must accept any interference received, including

interference that may cause undesired operation.

Flashforge shall not be liable for errors contained herein for incidental

consequential damages in connection with furnishing, performance or use of

this material.

This document contains proprietary information protected by copyright.

Reserved.

Filament Requirements

Filament Storage

It’s recommended to use the filaments offered by Flashforge, or from the brands

accepted by Flashforge. Due to the different properties of filaments, you need to

modify printing parameters when using those which are not offered by Flashforge.

All polymers degrade with time. Do not unpack filament until necessary. Filament

should be stored in a dry and dust-free environment.

Name

Extruder quantity

Printing precision

Positioning precision

Layer thickness

Build volume

Nozzle diameter

Printing speed

Highest extruder

temperature

Supported filament

Power supply

Device size

Connectivity

Filament run-out reminder

Build plate

Remote camera monitoring

HEPA 13 Air filter

Adventurer 4 Pro

±0.1 mm

(test of a 100mm cube)

X/Y-axis：0.011 mm；

Z-axis：0.0025 mm

0.1~0.4 mm

220 x 200 x 250 mm

0.4(default)

0.6/0.3 mm(optional)

10~300mm/s

265℃

ABS/PLA/PETG/PLA-CF/PETG-CF

AC100-240V/DC 24V/

13.3A,320W

500(L)*470(W)*550(H)mm

USB / Wi-Fi/ Ethernet

√

PEI flexible steel platform

√

Parameters

Chapter 1 Adventurer 4 Pro

5. Filament intake cover

7. Platform base

9. Touch screen

4. Spool holder

1. Power switch

2. Power socket

8. Build plate

6. Front cover

20. Camera

13. Filament guide tube joint

15. Fan for cooling the extruder

11. Ethernet input

12. Extruder

10. USB

16. Fan for cooling the model

21. Air filter

17. Buckle 18. Air duct

3. Filament cover

19. Nozzle

14. Cable slot

1.1 Component Introduction

3D Printer Filament After-Sales

Service Card

Screwdriver

0.6-265 Nozzle

User Guide Unclogging

Pin Tool

Power Cable

Grease

Allen Wrench

Glue Stick

Filament Guide

Tube Joint

Leveling Card

USB Flash Drive

1.2 Packing List

1. Open the carton. 2. Take out the top foam box, power

cord, after-sales service card, user

guide and USB flash drive.

3. Take out the printer from the carton,

and remove the bubble wrap around

the printer. Tear off the fixing tapes

and the front door protective bag.

4. Open the front door of the printer

and take out the EPE foam filled

inside and filament.

Chapter 2 Unpacking

5. Take out the printer from the carton,

and remove the bubble wrap around

the printer. Tear off the fixing tapes

and the front door protective bag.

Indice

Altri manuali Flashforge Stampante 3D

Flashforge

Flashforge Finder Manuale utente

Flashforge

Flashforge Inventor II Manuale utente

Flashforge

Flashforge Creator Pro Manuale utente

Flashforge

Flashforge Creator Manuale di istruzioni

Flashforge

Flashforge Creator Pro Manuale utente

Flashforge

Flashforge Creator 3 Pro Manuale utente

Flashforge

Flashforge Finder Manuale utente

Flashforge

Flashforge DREAMER Manuale utente

Flashforge

Flashforge Creator3 Manuale utente

Flashforge

Flashforge Guider II Manuale utente

Flashforge

Flashforge AD1 Manuale utente

Flashforge

Flashforge DREAMER Manuale utente

Flashforge

Flashforge Finder Manuale utente

Flashforge

Flashforge Guider II Manuale utente

Flashforge

Flashforge DREAMER Manuale utente

Flashforge

Flashforge Guider 2 Manuale utente

Flashforge

Flashforge Guider II Manuale utente

Flashforge

Flashforge Guider 3 Manuale utente

Flashforge

Flashforge Finder Manuale utente

Flashforge

Flashforge Guider Manuale utente

Flashforge

Flashforge Inventor II Manuale utente

Flashforge

Flashforge CN/EN-A01 Manuale utente

Flashforge

Flashforge Cura Manuale

Flashforge

Flashforge Creator Pro Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente