Fujitsu PRIMERGY TX1310 M1 Manuale utente
Operating Manual - English
FUJITSU Server PRIMERGY TX1310 M1
Operating Manual
Edition May 2014
Copyright and Trademarks
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]su.com.
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright © 2014 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any without the prior written permission of
Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.
TX1310 M1
Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.
Operating Manual
TX1310 M1
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market: About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://jp.fujitsu.com/platform/server/primergy/harddisk/
TX1310 M1
Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Concept and target groups for this manual . . . . . . . . . . 9
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 11
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 12
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 17
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 23
4 Important information . . . . . . . . . . . . . . . . . . . . . 25
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 25
4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 33
4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 34
4.4 Transporting the server . . . . . . . . . . . . . . . . . . . . 35
4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 36
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 39
5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 40
5.2 Setting up the server . . . . . . . . . . . . . . . . . . . . . . 41
5.3 Connecting devices to the server . . . . . . . . . . . . . . . 42
5.4 Connecting the server to the mains . . . . . . . . . . . . . . 43
5.5 Notes on connecting/disconnecting cables . . . . . . . . . 45
Operating Manual
TX1310 M1
Contents
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 47
6.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 47
6.2 Control elements and indicators . . . . . . . . . . . . . . . . 48
6.2.1 Front of the server . . . . . . . . . . . . . . . . . . . . . . . . 48
6.2.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 49
6.2.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 49
6.2.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.2.2.1 Indicators on the connector panel: LAN indicators . . . . . . 50
6.3 Switching the server on and off . . . . . . . . . . . . . . . . 51
6.4 Configuring the server . . . . . . . . . . . . . . . . . . . . . 55
6.4.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 55
6.4.2 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 56
6.4.3 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 57
6.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 58
7 Property and data protection . . . . . . . . . . . . . . . . . . 59
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 59
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 61
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 61
8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 62
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 62
8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 63
8.5 No screen display or display drifts . . . . . . . . . . . . . . . 63
8.6 No mouse pointer displayed on screen . . . . . . . . . . . . 63
8.7 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 64
8.8 Error message on screen . . . . . . . . . . . . . . . . . . . . 64
8.9 Expansion cards or onboard devices not recognized . . . . 64
8.10 Temperature warning . . . . . . . . . . . . . . . . . . . . . . 65
TX1310 M1
Operating Manual
Contents
8.11 No effect of keyboard or mouse . . . . . . . . . . . . . . . . 65
8.12 Optical drive cannot read data . . . . . . . . . . . . . . . . 65
Operating Manual
TX1310 M1
Contents
TX1310 M1
Operating Manual 9
1 Introduction
The PRIMERGY TX1310 M1 server is an Intel-based server for workgroups and
small networks. The server is suitable for use as a file server and also as an
application, information or Internet server.
Thanks to its highly developed hardware and software components, the
PRIMERGY TX1310 M1 server offers a high level of data security and
availability.
Security functions in the BIOS-Setup and on the system board protect the data
on the server against manipulation. The supported RAID levels allow the hard
disk controllers to offer error tolerance, through data redundancy, for users who
want to provide complete protection for valuable data.
Its low noise level and high energy efficiency make it ideal for office
environments.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY TX1310 M1 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
10 Operating Manual
TX1310 M1
Introduction
Different versions for TX1310 M1
The PRIMERGY TX1310 M1 is available in different versions. Your base unit
may not have all functions described in this manual. The following table
provides an overview of the different features:
System board D3219-Axx D3219-Bxx
Main Memory 4 slots for 1600 MHz
memory modules DIMM
1A, 1B, 2A, 2B
2 slots for 1600 MHz memory
modules DIMM 1A, 1B
PCI slots Slot 1: PCIe x1 slot Gen 2
(mechanically x4)
Slot 2: PCIe x4 slot Gen 2
(mechanically x8)
Slot 3: PCIe x8 slot Gen 3
(mechanically x8,
notched)
Slot 4: PCIe x8 slot Gen 3
(mechanically x8,
notched)
Slot 1: not assembled
Slot 2: not assembled
Slot 3: PCIe x8 slot Gen 3
(mechanically x8, notched)
Slot 4: PCIe x8 slot Gen 3
(mechanically x8, notched)
Altri manuali per PRIMERGY TX1310 M1
1
Indice
Altri manuali Fujitsu Server
Fujitsu
Fujitsu PRIMERGY TX140 S1p Manuale utente
Fujitsu
Fujitsu PRIMEQUEST 1000 Series Foglio di istruzioni
Fujitsu
Fujitsu PRIMERGY ECONEL30 Manuale utente
Fujitsu
Fujitsu PRIMERGY CX2550 M2 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX200 S6 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX200 S2 Manuale utente
Fujitsu
Fujitsu SPARC Enterprise M8000 Guida all'installazione
Fujitsu
Fujitsu PRIMEQUEST 1000 Series Manuale utente
Fujitsu
Fujitsu PRIMERGY TX300 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX2520 M1 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX1330 M4 Manuale utente
Fujitsu
Fujitsu BX630 - PRIMERGY - S2 Dual Manuale del proprietario
Fujitsu
Fujitsu PRIMERGY BX600 Manuale utente
Fujitsu
Fujitsu SPARC Enterprise M4000 Manuale
Fujitsu
Fujitsu PRIMERGY RX2520 M5 Manuale utente
Fujitsu
Fujitsu PRIMERGY TX300 S5 Manuale del proprietario
Fujitsu
Fujitsu Primergy RX200 S4 Guida
Fujitsu
Fujitsu PRIMERGY CX400 M6 Manuale utente
Fujitsu
Fujitsu PRIMERGY SX980 S1 Manuale del proprietario
Fujitsu
Fujitsu Primergy RX300 S4 Guida
