Fujitsu PRIMERGY TX300 S5 Manuale del proprietario
Produktfamilie
PRIMERGY TX300 S5
Server
Service Supplement
Redakteur
Fujitsu Technology Solutions GmbH München
81730 München
e-mail: [email protected]su.com
Tel.: (089) 61001-???
Fax: 0 700 / 372 00000
PRIMERGY TX300 S5
Sprachen: En
Edition May 2009
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]ujitsu.com.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2009 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
PRIMERGY TX300 S5 Service Supplement
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . 17
Ê . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.1.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.1.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 18
4.1.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . 18
4.1.3 Removing the fan carrier . . . . . . . . . . . . . . . . . . . . . 19
4.1.4 Removing / mounting the cable cover . . . . . . . . . . . . . . 20
4.2 Replacing the operating panel module . . . . . . . . . . . . 22
4.3 Replacing PSU riser cards . . . . . . . . . . . . . . . . . . . 28
4.4 Replacing the 3.5-inch HDD backplane . . . . . . . . . . . . 33
4.5 Replacing the 2.5-inch HDD backplane . . . . . . . . . . . . 38
4.5.1 Replacing the 12 x 2.5-inch HDD backplane . . . . . . . . . . 38
4.5.2 Replacing the 4 x 2.5-inch HDD backplane
(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 47
4.6 Replacing the fan board . . . . . . . . . . . . . . . . . . . . 52
4.7 Replacing intrusion switches . . . . . . . . . . . . . . . . . 55
4.8 Replacing the chassis ID board . . . . . . . . . . . . . . . . 63
Service Supplement PRIMERGY TX300 S5
Contents
4.9 Replacing the system board . . . . . . . . . . . . . . . . . . 65
4.10 Replacing the DC-DC Inverter Board . . . . . . . . . . . . . . 71
4.11 Replacing the TPM board . . . . . . . . . . . . . . . . . . . . 74
4.12 Replacing the UFM board . . . . . . . . . . . . . . . . . . . . 76
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
5.1.1 Operating panel board . . . . . . . . . . . . . . . . . . . . . . 79
5.1.2 Front USB board . . . . . . . . . . . . . . . . . . . . . . . . . 80
5.1.3 DC-DC inverter board . . . . . . . . . . . . . . . . . . . . . . . 81
5.1.4 6 x 3.5-inch HDD backplane . . . . . . . . . . . . . . . . . . . 82
5.1.5 2 x 3.5-inch HDD backplane
(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 83
5.1.6 12 x 2.5-inch HDD backplane . . . . . . . . . . . . . . . . . . . 84
5.1.7 4 x 2,5-inch HDD backplane
(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 85
5.1.8 Fan board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
5.1.9 PSU riser card . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PRIMERGY TX300 S5 Service Supplement 5
1 Introduction
The PRIMERGY TX300 S5 Server is an Intel-based server for medium-sized
and large networks. The server is suitable for use as a file server as well as an
application, information, or Internet server. It is available as a floorstand or rack
model. The floorstand model can be converted to a rack model using an optional
conversion kit.
1.1 Documentation overview
Concept and target groups
This Service Supplement completes the information given in the Operating
Manual, the Options Guide and the Technical Manual of the system board.
The activities described in this manual may only be performed by service
personnel.
Service DVD
Service partners of Fujitsu Technology Solutions can order a Service DVD
PRIMERGY. On the DVD the following manuals are available in pdf format:
– The “Safety notes and other important information” manual
– The Operating Manual for PRIMERGY TX300 S5
– The Technical Manual for the system board D2619
– The Options Guide for PRIMERGY TX300 S5
– The Service Supplement PRIMERGY TX300 S5
– The “D2619 BIOS Setup Utility” manual
6 Service Supplement PRIMERGY TX300 S5
Documentation overview Introduction
Information/procedure Manual
Detailed safety notes “Safety notes and other
important information”
manual
Features and technical data of the server Operating Manual
Installation and operation, among other things:
– External ports
– Operation
– Configuration of the server
– Installation of the rack mounting kit
Troubleshooting
Installation/removal or replacing of
CSS components:
– Hot-plug power supply units
– Hot-plug hard disk drives
– Memory modules
– System fans
– Expansion cards
Information about the system board:
– Features of the system board
– Board layout
– Jumper settings
–LEDdisplays
– Replacing the battery
Technical Manual
Table 1: Overview of the documentation TX300 S5
PRIMERGY TX300 S5 Service Supplement 7
Introduction Documentation overview
Extensions and upgrades:
IFor some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Expanding/replacing the main memory
– Installing a second processor / replacing the
processor / replacing the heat sink
– Installing accessible drives, like floppy disk
drive, DVD/DVD-RW drive, multibay etc.
– Installing a hard disks extension box
– Installing a LSP or a LSD
– Installing expansion cards in the PCI slots
– Inserting the RAID key
– Installing the UFM module
– Installing the TPM module
– Converting to redundant fans
– Converting from the floorstand model to the
rack model
Options Guide
Cabling
Replacement routines:
– Replacing the operating panel board
– Replacing the front USB board
– Replacing PS riser cards
– Replacing the 3.5“ HDD backplane
– Replacing the 2.5“ HDD backplanes
– Replacing the intrusion switches
– Replacing the chassis ID board
– Replacing the system board
– Replacing the TPM board
Service Supplement
Board layout
BIOS setup BIOS Setup
Information/procedure Manual
Table 1: Overview of the documentation TX300 S5
8 Service Supplement PRIMERGY TX300 S5
Notational conventions Introduction
1.2 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
„Quotation marks“ indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
Table 2: Notational conventions
PRIMERGY TX300 S5 Service Supplement 9
2Procedure
VCAUTION!
The actions described in these instructions should only be performed by
service personnel.
ÊFirst of all please familiarize yourself with the safety instructions in the
section chapter “Safety notes” on page 11 et seq. .
ÊEnsure that all required manuals (see Service DVD) are available, print out
the PDF files if necessary. You will definitely need the Operating Manual for
the server, the Options Guide for the server and the Technical Manual for the
system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the chapter “Replacement routines” on
page 17 et seq. .
ÊReplace the defective component as described in the relevant chapter.
IProcedures which are identical for the floorstand and rack models are
only described for the floorstand model.
ÊClose the server.1
ÊConnect the cables. 1
ÊConnect the server to the power outlet.1
ÊStart the operating system.1
ÊIf necessary, configure the server as required.1
1These procedures are described in the Operating Manual.
Altri manuali per PRIMERGY TX300 S5
2
Indice
Altri manuali Fujitsu Server
Fujitsu
Fujitsu Primergy RX100 S3 Manuale utente
Fujitsu
Fujitsu PRIMERGY TX120 S3p Manuale utente
Fujitsu
Fujitsu Primergy BX920 S3 Manuale utente
Fujitsu
Fujitsu SPARC Enterprise M3000 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX200 S2 Manuale utente
Fujitsu
Fujitsu PRIMERGY TX1310 M1 Manuale utente
Fujitsu
Fujitsu BX630 - PRIMERGY - S2 Dual Manuale utente
Fujitsu
Fujitsu PRIMERGY RX2520 M1 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX100 S6 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX600 S4 Manuale utente
Fujitsu
Fujitsu PRIMERGY RX200 S8 Manuale utente
Fujitsu
Fujitsu Primergy RX100 S5 Guida
Fujitsu
Fujitsu SPARC Enterprise T5140 Manuale utente
Fujitsu
Fujitsu PRIMERGY TX100 S1 Manuale del proprietario
Fujitsu
Fujitsu PRIMERGY TX1330 M4 Manuale utente
Fujitsu
Fujitsu PRIMEQUEST 480 Manuale tecnico
Fujitsu
Fujitsu PRIMERGY TX120 S2 Manuale utente
Fujitsu
Fujitsu BS2000 SE Series Manuale utente
Fujitsu
Fujitsu SPARC Enterprise M3000 Manuale utente
Fujitsu
Fujitsu PRIMERGY BX924 S2 Manuale utente
