Fujitsu PRIMERGY TX1320 M5 Manuale utente

FUJITSU Server PRIMERGY TX1320 M5

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

12/2021

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de/en/

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

TX1320 M5 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual TX1320 M5

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

TX1320 M5 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 12/2021 Initial release

Upgrade and Maintenance Manual TX1320 M5

Content

1 Introduction 17

1.1 Concept and target groups of this manual 17

1.2 Notational conventions 17

2 Before you start 19

2.1 Basic information 19

2.1.1 Proceeding 19

2.1.2 Advanced Thermal Design (ATD) 19

2.1.3 Installing optional components 20

2.1.4 Replacing a defective component 20

2.2 Classification of procedures 21

2.2.1 Assignment of unit categories 21

2.2.2 Customer Replaceable Units (CRU) 21

2.2.3 Upgrade and Repair Units (URU) 22

2.2.4 Field Replaceable Units (FRU) 23

2.3 Average task duration 24

2.4 Tools you need at hand 25

2.5 Documentation overview 26

2.5.1 Downloading manuals 26

2.5.2 List of documents 26

3 Important information 29

3.1 Introduction 29

3.2 Safety instructions 29

3.2.1 Basic safety instructions 29

3.2.2 Before starting up 30

TX1320 M5 Upgrade and Maintenance Manual

3.2.3 Installation and operation 30

3.2.4 Batteries 33

3.2.5 Working with optical disk drives (ODDs) and media 33

3.2.6 Laser information 35

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 35

3.2.8 Transporting the server 37

3.2.9 Installing the server in the rack 38

3.2.10 Other important information 38

3.3 ENERGY STAR 39

3.4 CE conformity 39

3.5 FCC Class A Compliance Statement 40

3.6 Environmental protection 41

4 Basic hardware procedures 43

4.1 Using diagnostic information 43

4.1.1 Proceeding 43

4.2 Locating the defective server 43

4.3 Determining the error class 44

4.4 Locating the defective component 44

4.5 Shutting down the server 45

4.6 Disconnecting the power cord 46

4.7 Getting access to the component 48

4.7.1 Safety notes 48

4.7.2 Unlocking the server 49

4.7.3 Removing the server cover 50

4.7.4 Removing the accessible drive bay cover 52

4.7.5 Removing the HDD bay cover 53

Content

Upgrade and Maintenance Manual TX1320 M5

4.8 Reassembling 54

4.8.1 Safety notes 54

4.8.2 Installing the server cover 54

4.8.3 Installing the HDD bay cover 55

4.8.4 Installing the accessible drive bay cover 55

4.9 Connecting the power cord 57

4.9.1 Connecting the power cord (standard PSU, with cable tie) 57

4.9.2 Connecting the power cord (hot-plug PSU) 58

4.10 Switching on the server 60

4.11 Handling the 2.5-inch HDD cage 60

4.11.1 Removing the 2.5-inch HDD cage 60

4.11.2 Installing the 2.5-inch HDD cage 62

4.12 Handling the HDD fan modules 64

4.12.1 Removing the HDD fan module (3.5-inch HDD variant) 64

4.12.2 Installing the HDD fan module (3.5-inch HDD variant) 65

4.12.3 Removing the HDD fan module (2.5-inch HDD variant) 67

4.12.4 Installing the HDD fan module (2.5-inch HDD variant) 68

5 Basic software procedures 71

5.1 Validation 71

5.2 Starting the maintenance task 71

5.2.1 Suspending BitLocker functionality 71

5.2.2 Disabling the boot watchdog 72

5.2.3 Removing backup and optical disk media 74

5.2.4 Verifying and configuring the backup software solution 74

5.2.5 Switching on the ID indicator 74

5.3 Completing the maintenance task 75

5.3.1 Updating or recovering the BIOS and iRMC S6 75

5.3.2 Verifying system information backup or restore 78

5.3.3 Updating expansion card firmware 79

5.3.4 Reconfiguring the backup software solution 80

5.3.5 Resetting the boot retry counter 81

Content

TX1320 M5 Upgrade and Maintenance Manual

5.3.6 Resetting the error status after replacing memory modules or

CPU 82

5.3.6.1 Resetting the error status after replacing memory modules 82

5.3.6.2 Resetting the error status after replacing CPUs 84

5.3.7 Enabling the boot watchdog 86

5.3.8 Enabling replaced components in the BIOS 87

5.3.9 Verifying the system time settings 87

5.3.10 Viewing and clearing the System Event Log (SEL) 88

5.3.11 Updating the NIC configuration file in a Linux and VMware

environment 90

5.3.12 Resuming BitLocker functionality 91

5.3.13 Performing a RAID array rebuild 92

5.3.14 Looking for MAC/WWN/GUID and SAS addresses 93

5.3.14.1 Basic information 93

5.3.14.2 Looking for the MAC address of a LAN controller 93

5.3.14.3 Looking for the WWN address of a fibre channel controller 94

5.3.14.4 Looking for the GUID address of an infiniband or Omni-Path

controller 95

5.3.14.5 Looking for SAS addresses of SAS controllers for external

devices 95

5.3.15 Using the Chassis ID Prom Tool 96

5.3.16 Configuring LAN teaming 98

5.3.17 Switching off the ID indicator 99

5.3.18 Performing a fan test 100

6 Power supply unit (PSU) 101

6.1 Safety notes 101

6.2 Basic information 101

6.3 Standard power supply 103

6.3.1 Replacing the standard PSU 103

6.3.2 Converting a standard power supply to a redundant power

supply 109

6.4 Redundant power supply 116

6.4.1 Installing a hot-plug PSU 116

6.4.2 Removing a hot-plug PSU 120

Content

Upgrade and Maintenance Manual TX1320 M5

Indice

Altri manuali Fujitsu Server

Fujitsu

Fujitsu PRIMERGY TX1330 M3 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX120 S3 Manuale utente

Fujitsu

Fujitsu Primergy RX100 S4 Guida

Fujitsu

Fujitsu FUTRO S700 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX300 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise M4000 Scheda tecnica

Fujitsu

Fujitsu Server PRIMERGY TX1330 M1 Manuale utente

Fujitsu

Fujitsu S540 Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 2800B3 Manuale utente

Fujitsu

Fujitsu PRIMERGY RX500 S7 Manuale utente

Fujitsu

Fujitsu Primergy BX900 S2 Manuale utente

Fujitsu

Fujitsu l ETERNUS AF Manuale utente

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu PRIMERGY RX330 S1 Manuale del proprietario

Fujitsu

Fujitsu FUTRO Z220 Manuale utente

Fujitsu

Fujitsu PRIMERGY CX2550 M6 Manuale utente

Fujitsu

Fujitsu BS2000 SE Series Manuale utente

Fujitsu

Fujitsu PRIMERGY RX200 S2 Manuale utente

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T5140 Guida all'installazione

Fujitsu

Fujitsu PRIMERGY RX900 S2 Manuale utente

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente