GOEBEL GO - LB1 Manuale utente
User Manual
User Manual
innovative fastener solutions
GO - LB1
Cordless Lockbolt Battery Tool
2| Deutsch1| English
Instruction manual: GO-LB1
Table of contents
www.goebel-group.com
Page
Safety measures 2 - 4
Daily maintenance & Environmental protection 4
1. Tool overview
1.1 Capacity
1.1 Technical parameters
1.2 Conguration/ Accessories (see g. A)
1.3 Parts list (see Fig. B)
1.4 Tool parts list of the GO-LB1
4
5
5
5 - 6
7
8
2. Preparing the tool
2.1 Checking the battery
2.2 Checking the tool
9
10
10
3. Tool operation
(important tips before starting work)
3.1 Preparation and review of the specication
3.2 Instructions for the setting process
11
11
11 - 12
4. Charger & Batteries
4.1 Technical parameters
4.2 Using the charger
4.3 Using the battery
13
13
13
13
5. FAQ (Questions / Answers) 14
6. Troubleshooting
6.1 Malfunctions
6.2 Possible causes
6.3 Corrective measures
14
14
14
14
7. Protection conditions & CE certication 15
Deutsch | 2English | 2
To reduce the risk of electric shock, personal injury, re and property damage, be sure
to follow the safety precautions below.
Description of the symbols:
www.goebel-group.com
Safety precautions
Danger
Indicates potential danger of serious injury or death
Warning
Indicates potential danger of serious injury or death
Caution
Indicates the risk of a minor injury
The following signs are used to classify and describe the types of information to be
followed.
This sign is used to alert the user to the prohibited action steps.
This sign is used to draw users' attention to the operating steps that must be
carried out to use the tool.
• This tool is restricted to setting lockbolts and must not be used for impact or other
purposes, such as a hammer.
• Do not overload the lockbolt tool. Please use it only within the range specied in the
function settings.
• Do not block the ventilation openings of the motor. Do not insert any objects into the
ventilation openings.
• It is recommended to wear safety glasses and personal protective equipment such as
gloves, hard hat, safety shoes, noise-insulating earplugs, fall protection devices and
other necessary protective measures when using this tool.
• Please keep the packaging boxes and accessories in a safe place and handle them
with care.
• The tool and accessories should be placed in the plastic case, stored in a dry place
and out of the reach of children.
Please keep the packaging box and accessories and handle them with care.
• The tool and accessories should be placed in the plastic case, stored in a dry place
and out of the reach of children.
2| Deutsch3| English
Safety precautions
www.goebel-group.com
Use of the battery
• Do not charge damaged, dirty or wet batteries.
• Batteries must not be thrown into water or re at any time, used batteries must not be
disposed of as you please
• Do not charge when the ambient temperature is below 0°C or above 45°C.
Use of the charger
• The original battery and the manufacturer's charger must be used for charging.
• Do not charge the battery with a damaged, dirty or damp charger.
• Do not place metal objects in the charging area as a short circuit may occur.
• This charger must not be used by persons with disabilities, mental disabilities or
persons without training or knowledge unless a safety ofcer is on site to supervise
or instruct them in its use.
Danger
• The lockbolt setting tool must not be used in a damp environment or in the vicinity of
ammable liquids and gases. Danger of explosion!
• Do not point the lockbolt setting tool at yourself, others or animals.
• Do not load in a damp environment, near an open re or in an environment with am-
mable, highly combustible gases that can easily be detonated.
Warning
• Tools should be placed so that they do not fall down to avoid unnecessary damage
and safety accidents.
• When installing the battery, be sure to x its position. After you hear a "click" sound the
battery is properly placed.
• When servicing this lockbolt settersetting tool, make sure that the charger and its
power supply equipment are in good condition.
• Use a power supply unit that matches the charger.
• Plugs, power cords and chargers should be checked regularly. If a problem is found, it
should be repaired by the maintenance personnel.
• Maintenance personnel must have professional skills; only qualied professionals
can carry out repairs. If in doubt, please return the tool to the authorised dealer or
manufacturer for repair.
• Original spare parts must be used during maintenance.
Deutsch | 2English | 4
www.goebel-group.com
Maintenance
• Regular maintenance prolongs the life of tools with a lithium battery and should
be carried out by an authorised dealer or manufacturer. For more frequent use, it is
recommended that maintenance be carried out in advance.
• Maintenance of the lockbolt tool is limited to replacement of worn parts and quick
wear parts, clamping jaws, clamping jaw sliders, etc. only, if necessary (see page 8
for replacement accessories).
• To keep the tool in good working condition, please check the tool's wearing parts fre-
quently. In case of wear or damage, please contact your dealer or the manufacturer.
Repair
• The warranty period is 1 year from the date of sale. Excluded from this are quick wear
parts e.g. clamping jaws, jaw sliders etc.
• Failure to comply with the relevant installation and commissioning instructions or fai-
lure to follow the operating procedures may result in the warranty being invalidated.
Environmental protection and resource recycling
• When replacing lithium batteries used in this product, the following points must be
observed:
• If your country or region has regulations, please be sure to take the old battery to a
professional company for disposal.
• Do not throw old batteries into the rubbish, re or water!
1. Tool overview
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
Name of the component
Screw Cap
Mouthpiece
LED Light
Trigger
Collector
Tool Housing
Battery
Charger
2| Deutsch5| English
www.goebel-group.com
1.1 Capacity / Technical parameters
245
260
92
64
Model GO-LB1
Motor 18V Brushless motor
Noise level < 78dB
Setting Mode Conventional setting mode
Traction Power 23000N
Stroke 16 mm
Net weight (incl. battery) 1,5Kg
Capacity ø 4,8 to 6,4 mm
Material specication All materials and specications of extensive grip range lockbolts and the
6-groove lockbolts
1.2 Conguration / Accessories
(Fig. A)
55
52
37
20
45
GO-LB1
68
Deutsch | 2English | 6
www.goebel-group.com
1.2 Conguration* / Accessories GO-LB1 (see g. A)
NO Parts description Code Spec Qty.
1 Screw cap 2277010210 1
2Mouthpiece 2277040210 Ø 6,4 1
3 Clamping Sleeve 2277040310 Ø 6,4 1
43-jaw set 2277040410 Ø 6,4 1
10 Mandrel collector 2277011610 1
15 Mouthpiece 2277041810 Ø 4,8 1
16 Clamping Sleeve 2277041910 Ø 4,8 1
17 3-jaw set 2277042010 Ø 4,8 1
18 Wrench 2277012310 1
27 Plastic case 2277013310 1
19 Battery Li-Ion 18V 2.0 Ah 2277012410 2
20 Battery Charger 2277012510 1
* General conguration
Very important note! This product is supplied with the factory default
conguration. If users have other special requirements or wish to
customise the conguration, please contact the dealer or
manufacturer in advance.
2| Deutsch7| English
www.goebel-group.com
Abb. B
1.3 Parts list (Fig. B)
Deutsch | 2English | 8
www.goebel-group.com
1.4 Tool Parts list of the GO-LB1 (see Fig. B)
NO Standard Code
Teilbezeichnung
Anzahl NO Standard Code Teilbezeichnung Anzahl
1
2277010210 Screw cap
1 14
2277062010 Plastic Cover
1
2
2277040210 Mouthpiece Ø 6,4 mm C6L
1 15
2277041810 Mouthpiece Ø 4,8 mm C6L
1
3
2277040310
Clamping Sleeve Ø 6,4 mm C6L
916
2277041910
Clamping Sleeve Ø 4,8 mm C6L
1
4
2277040410 3-Jaw Set Ø 6,4 mm C6L
1 17
2277042010 3-Jaw Set Ø 4,8 mm C6L
5
2277040510 Gear Box Set
1 18
2277012310 Wrench
6
2277050610 Brushless Motor
1 19
2277012410 Battery Li-Ion 18V 2.0 Ah
2
7
2277011310 Tool body screw
920
2277012510 Battery Charger
1
8
2277011410 Tool Body GO-LB1
1 21
2277049911 Mouthpiece Ø 4,8 mm Magna
1
9
2277011510 Mandrel Release Component
122
2277049811
Clamping Sleeve Ø 4,8 mm Magna
1
10
2277011610 Mandrel Collector
1 23
2277049711 3-Jaw Set Ø 4,8 mm Magna
1
11
2277041210 PCB-Set
124
2277049611 Mouthpiece Ø 6,4 mm Magna
1
12
2277061810 Trigger Spring
125
2277049511
Clamping Sleeve Ø 6,4 mm Magna
1
13
2277011810 Trigger
126
2277049411 3-Jaw Set Ø 6,4 mm Magna
1
*Please note that the shaded parts in the list are wear parts. The serial numbers 5, 6, 11 are structural parts.
* Important note: Serial numbers 2-4, 15-17, 21-26 (shaded part with *) are optional accessories!
2| Deutsch9| English
www.goebel-group.com
2. Preparation of the tool
Make sure that you remove the battery from the lockbolt setter before replacing the
wearing parts (mouthpiece, clamping jaw sleeves and the three clamping jaws),
otherwise there is a risk of injury! Choose a mouthpiece that corresponds to the
specication of the lockbolt. The procedure for replacing the components is shown in
the following illustration:
Before putting the lockbolt setting tool into operation, please read the following important instructions carefully.
Make sure that the battery has been removed from the tool as shown in gure ① In
the order shown above: ② loosen the screw cap with the wrench in the direction of
the arrow. Now you can replace the screw cap, the mouthpiece, the jaw sleeve and the
3-jaws according to ③ Once the process is complete, screw the screw cap back on
according to ④ using the wrench. Now you can reinsert the battery.
① ②
③④
Indice
