Granit 61099000 Manuale utente
These operating instructions must be read thoroughly before use and followed. These Operating
Instructions must be retained for future reference.
Translation of the original operating instructions
Operating Instructions
Air hose reel
61099000
GENERAL SAFETY
WARNING! This product is designed for use on regulated compressed air lines or on air
compressors where the air pressure does not exceed the maximum pressure limit of
the hose. Failure to follow this may result in personal injury and or property damage.
WARNING! Do not release hose rapidly! Retracting hose could cause injury or property
damage. Maintain control of hose as it retracts.
INSTALLATION
1. Using the reel mounting bracket as a guide, drill 4 pilot holes, into wood wall studs or work bench.
2. Attach hose heel, using the screws provided or bolts and washers.
WARNING! Make sure that the mounting will support up to 25 kg.
3. Connect air supply ¼” BSP inlet fitting. Make sure the threads are sealed with PTFE tape.
4. Connect desired quick connect or tool to the ¼” BSP outlet fitting. Make sure the threads are sealed with
PTFE tape.
OPERATION
1. To extend hose, pull hose to desired length. The hose reel must be released to maintain its length. It may
be necessary to pull hose beyond desired length to keep it from automatically retracting.
2. To retract, pull hose lightly then allow it to retract. Hose will then automatically retract.
WARNING! Do not release hose rapidly! Retracting hose could cause injury or property
damage. Maintain control of hose as it retracts.
TECHNICAL SPECIFICATION
MODEL
HOSE LENGTH
TYPE OF HOSE
PRESSURE
INNER
DIAMETER OF
HOSE
SIZE OF INNER
FITTING
GWA20/
61099000
18 m
PU MESH
Max. 1,2 MPa
(174 PSI)
3/8”
¼” BSP
EC declaration of conformity
The manufacturer,
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
hereby declares on its sole responsibility that the hose reel
Type/series identification: 61099000
is in conformity with the provisions of Machinery Directive (2006/42/EC).
The product was developed in accordance with the following standards:
PPP 53268B:2010
Annex I of 2006/42/EG
Technical documentation is kept by:
Herr Eike Viebrock
Wilhelm Fricke SE
Zum Kreuzkamp 7
DE-27404 Heeslingen
The serial number and model year are shown on the type plate of the equipment.
Translation of the original declaration of conformity
Indice
Altri manuali Granit Utensili
