Harbor Freight Tools 97028 Manuale utente

BENCHTOP PLANISHING HAMMER

Model

97028

ASSEMBLY AND OPERATING INSTRUCTIONS

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

REV 08b

Page 2SKU 97028 For technical questions, please call 1-800-444-3353.

SAVE THIS MANUAL

Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in

the back of the manual near the assembly diagram (or month and year of purchase if

product has no number). Keep this manual and the receipt in a safe and dry place for

future reference.

IMPORTANT SAFETY INFORMATION

In this manual, on the labeling, and all other information

provided with this product:

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates a hazardous situation

which, if not avoided, will result in death or

serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death

or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation

which, if not avoided, could result in minor

or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol,

is used to address practices not related to

personal injury.

DANGER

WARNING

CAUTION

Notice

CAUTION

Page 3SKU 97028 For technical questions, please call 1-800-444-3353.

GENERAL SAFETY RULES

WARNING! Read all instructions

Failure to follow all instructions listed below may result in serious injury.

SAVE THESE INSTRUCTIONS

Work area safety1.

Keep work area clean and well lit.a. Cluttered or dark areas invite accidents.

Keep children and bystanders away while operating this Planishing Hammer.b.

Distractions can cause you to lose control.

Personal safety2.

Stay alert, watch what you are doing and use common sense when operating.a.

Do not use this tool while you are tired or under the inuence of drugs, alcohol

or medication. A moment of inattention while operating may result in serious

personal injury.

Use safety equipment. Always wear ANSI-approved safety goggles andb.

heavy-duty work gloves. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate conditions

will reduce personal injuries.

Do not overreach. Keep proper footing and balance at all times.c. This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair,d.

clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

WARNING: The brass components of this product contain lead, a chemicale.

known to the State of California to cause birth defects (or other reproductive

harm). (California Health & Safety code § 25249.5, et seq.)

Tool use and care3.

Do not force the tool. Use the correct tool for your application.a. The correct

tool will do the job better and safer at the rate for which it was designed.

Do not use the Planishing Hammer if the Trigger (16) does not completelyb.

start and stop the action of the tool. If the Planishing Hammer cannot be

controlled with the Trigger (16), it is dangerous and must be repaired.

Disconnect the Planishing Hammer from the air source before making anyc.

adjustments, changing accessories, or storing. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Store the Planishing Hammer out of the reach of children and do not allowd.

persons unfamiliar with this tool or these instructions to operate the Planishing

Hammer. Tools are dangerous in the hands of untrained users.

Page 4SKU 97028 For technical questions, please call 1-800-444-3353.

Maintain tools. Check for misalignment or binding of moving parts, breakagee.

of parts, damaged or cracked hoses, bad connections and any other condition

that may affect the tool’s operation. If damaged, have the tool repaired

before use. Many accidents are caused by poorly maintained tools. Properly

maintained tools are less likely to bind and are easier to control.

Use the Planishing Hammer in accordance with these instructions andf.

in the manner intended for this particular type of tool, taking into account

the working conditions and the work to be performed. Use of this tool for

operations different from those intended could result in a hazardous situation.

Service4.

Have your Planishing Hammer serviced by a qualied repair person using a.

only identical replacement parts. This will ensure that the safety of the tool is

maintained.

VIBRATION HAZARD

This tool vibrates during use. Repeated or long-term exposure to vibration may

cause temporary or permanent physical injury, particularly to the hands, arms

and shoulders. To reduce the risk of vibration-related injury:

Anyone using vibrating tools regularly or for an extended period should rst 1.

be examined by a doctor and then have regular medical check-ups to ensure

medical problems are not being caused or worsened from use. Pregnant women

or people who have impaired blood circulation to the hand, past hand injuries,

nervous system disorders, diabetes, or Raynaud’s Disease should not use this

tool. If you feel any medical or physical symptoms related to vibration (such as

tingling, numbness, and white or blue ngers), seek medical advice as soon as

possible.

Do not smoke during use. Nicotine reduces the blood supply to the hands and2.

ngers, increasing the risk of vibration-related injury.

Wear suitable gloves to reduce the vibration effects on the user.3.

Use tools with the lowest vibration when there is a choice between different4.

processes.

Include vibration-free periods each day of work.5.

Grip the workpiece as lightly as possible (while still keeping safe control of it).6.

Let the tool do the work.

To reduce vibration, maintain the tool as explained in this manual. If any7.

abnormal vibration occurs, stop use immediately.

Page 5SKU 97028 For technical questions, please call 1-800-444-3353.

SPECIFIC SAFETY RULES

WARNING! To prevent serious injury and/or property damage:

Wear ANSI-approved safety goggles and heavy-duty work gloves during use.1.

Do not exceed max air pressure of 100 PSI.2.

Disconnect from air supply when not in use.3.

Mount on at, level surface able to support the weight of the Planishing Hammer 4.

and the material being hammered.

Inspect before each use; do not use if parts are loose or damaged.5.

Read this manual before set up and/or use.6.

Maintain labels and nameplates on the tool. These carry important safety7.

information. If unreadable or missing, contact Harbor Freight Tools for a

replacement.

Avoid unintentional starting. Prepare to begin work before turning on the tool.8.

Keep ngers away from the anvil head.9.

Do not leave the tool unattended when it is plugged into an air supply. Turn off10.

the tool, and disconnect from air supply before leaving.

Use clamps (not included) or other practical ways to secure and support the11.

workpiece to a stable platform. Holding the work by hand or against your body is

unstable and may lead to loss of control.

This product is not a toy. Keep it out of reach of children.12.

Some dust created by power sanding, sawing, grinding, drilling, and other13.

construction activities, contains chemicals known [to the State of California] to

cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and cement or other masonry products

Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to lter out microscopic particles. (California Health &

Safety Code § 25249.5, et seq.)

The warnings, precautions, and instructions discussed in this instruction manual14.

cannot cover all possible conditions and situations that may occur. It must be

Page 6SKU 97028 For technical questions, please call 1-800-444-3353.

understood by the operator that common sense and caution are factors which

cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

SPECIFICATIONS

Construction Materials

Stand/Mounting Bracket: Formed Steel

Anvil Shaft and Anvils: Machined Steel

Air Hammer: Die-Cast Aluminum

Air Hose: Black Braided Reinforced

Rubber w/Crimped Brass Fittings

Mounting Plate Thickness 11 Gauge Steel Plate

Air Inlet Size 1/4” X 18 NPT (Female)

Activation Method Variable Speed Remote Foot Pedal

Maximum Air Pressure 100 PSI

Air Consumption 90 PSI @11 SCFM

Blows Per Minute 700

Net Weight 16.20 lb

Hose Length 13 ft.

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If

any parts are missing or broken, please call Harbor Freight Tools at the number shown

on the cover of this manual as soon as possible.

SET UP INSTRUCTIONS

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this manual including all text under subheadings therein

before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages, refer

to the Assembly Diagram near the end of this manual.

Page 7SKU 97028 For technical questions, please call 1-800-444-3353.

ASSEMBLY

Mount the Frame (24) to workbench, and make sure it is fastened securely to1.

prevent loosening during use.

The Frame can be lled with sand if you wish to help minimize sound and 2.

vibration.

Figure 1

Mini Planishing

Hammer

Air Inlet (9)

Foot Pedal (26)

Air Hose (25)

3. Connect the Rubber Air Hose (25) to both the Air Inlet (9) and the Foot Pedal

(26). See Figure 1.

C4.

Figure 2

Foot Pedal

(26)

onnect pneumatic air supply to the Foot Pedal (26). See Figure 2 and Figure

3 on page 8.

The air line components listed in Figure 2 are not included as part of this tool but5.

may be purchased at Harbor Freight tools.

Be sure to tighten all ttings and connections.6.

REV 08a

Page 8SKU 97028 For technical questions, please call 1-800-444-3353.

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this manual including all text under subheadings therein

before set up or use of this product.

Figure 3

Air Outlet, connect

hose to Hammer

Air Inlet, connect hose

to air compressor

The Frame (24) should be positioned so that the mounted Mini Planishing Ham-7.

mer is extending slightly over the edge of the workbench. This will help to accom-

modate various shapes being plannished.

Screw off the Coil Spring (15) and remove the Anvil Head (21) and Hammer8.

Shank (23) from the Cylinder (14).

Slide the Hammer Body (1) into the Frame (24).9.

Insert the Anvil Head (21) into the Anvil Shaft (19) and tighten in place with Hex10.

Screw (20).

Place the Anvil Head (21) and Hammer Shank (23) into the Coil Spring (15) and11.

screw onto the Cylinder (14). See Parts List and Assembly Diagram on page

11 and 12.

OPERATING INSTRUCTIONS

REV 08a

Page 9SKU 97028 For technical questions, please call 1-800-444-3353.

Turn on the Air Compressor (not included) and set it to 90 PSI. Do not exceed1.

maximum air pressure of 100 PSI.

Before planishing, test the operation by pressing down on the Foot Pedal (26).2.

Adjust the cycle speed of the Planishing Hammer by turning the Regulator (4)3.

clockwise or counterclockwise.

Using both hands, place the material to be planished between the Anvil Head4.

(21) and the Hammer Shank (23).

Press down on the Foot Pedal (26) to opperate planishing action.5.

When nished, remove your foot from the Foot Pedal (26) and wait for the action 6.

to stop completely.

Turn the air compressor off.7.

Press down on the Foot Pedal (26) to release any remaining air pressure within8.

the Planishing Hammer.

To prevent accidents, always disconnect the air supply after use. Clean, then9.

store the tool indoors out of children’s reach.

MAINTENANCE AND SERVICING

Risk of serious personal injury, unplug the tool from its air

supply before performing any inspection, maintenance, or

cleaning procedures.

Damaged equipment can fail, causing serious personal

injury. Do not use damaged equipment. If abnormal noise or

vibration occurs, have the problem corrected before further

use.

Cleaning, Maintenance, and Lubrication

BEFORE EACH USE,1. inspect the general condition of the tool. Check for

loose screws, misalignment or binding of moving parts, cracked or broken parts,

damaged air hoses, and any other condition that may affect its safe operation.

AFTER USE,2. clean external surfaces of the tool with clean, moist cloth.

WARNING! If the air hose is damaged, DO NOT attempt to repair it. It must3.

be replaced.

WARNING

OPERATING INSTRUCTIONS

Page 10SKU 97028 For technical questions, please call 1-800-444-3353.

Troubleshooting

Problem Possible Causes Probable Solutions

Mini Planishing

Hammer will not

operate when Foot

Pedal is depressed.

No air pressure in air line.

Regulator valve is closed.

Check all hoses, connections

and make sure the compressor is

operating.

Turn the valve counterclockwise.

Mini Planishing

Hammer operates

but at diminished

pressure.

Air Pressure is below normal operating

pressure of 90 PSI.

Regulator valve is closed.

Check Regulator on compressor and

Planishing Hammer.

Turn the valve counterclockwise.

Be sure to follow all manufacturer’s instructions, safety warnings and

maintenance procedures in the manual of the air compressor you are using with this

Mini Plannishing Hammer.

LEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT

HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS

QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR

DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE

UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER

ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL

PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not

available individually as replacement parts.

Indice

Altri manuali Harbor Freight Tools Utensili

Harbor Freight Tools

Harbor Freight Tools DOYLE Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools 95878 Manuale elenco delle parti

Harbor Freight Tools

Harbor Freight Tools Central Machinery 46725 Manuale utente

Harbor Freight Tools

Harbor Freight Tools 46499 Manuale utente

Harbor Freight Tools

Harbor Freight Tools 91670 Manuale utente

Harbor Freight Tools

Harbor Freight Tools Tidy-Up Organizer 02453 Manuale utente

Harbor Freight Tools

Harbor Freight Tools HAULMASTER 59665 Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools NITROUS 98475 Manuale utente

Harbor Freight Tools

Harbor Freight Tools MADDOX MH-DCT19 Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools 59789 Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools 42606 Guida di riferimento rapido

Harbor Freight Tools

Harbor Freight Tools PITTSBURGH AUTOMOTIVE 63391 Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools CEN-TECH 2458 Manuale utente

Harbor Freight Tools

Harbor Freight Tools 95916 Manuale elenco delle parti

Harbor Freight Tools

Harbor Freight Tools 91510 Manuale utente

Harbor Freight Tools

Harbor Freight Tools Bauer 21506C-B Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools MADDOX 1721C-B Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 95122 Manuale elenco delle parti

Harbor Freight Tools

Harbor Freight Tools 47926 Manuale elenco delle parti

Harbor Freight Tools

Harbor Freight Tools ICON 56683 Istruzioni per il montaggio

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 44983 Guida di riferimento rapido

Harbor Freight Tools

Harbor Freight Tools 90360 Manuale utente

Harbor Freight Tools

Harbor Freight Tools Central Pneumatic 97728 Manuale di installazione

Harbor Freight Tools

Harbor Freight Tools Pittsburgh 64983 Manuale dell'operatore

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare