IEK ARMA2L 3 Series Manuale utente

Êðàòêîå ðóêîâîäñòâî ïî ýêñïëóàòàöèè

— áîêîâûõ êóñà÷åê äëÿ ðåçêè ïðîâîäîâ;

Êóñà÷êè áîêîâûå ñåðèè Ê3 è ñåðèè Ê2 òîâàðíîãî çíàêà IEK (äàëåå —

êóñà÷êè) ïðåäíàçíà÷åíû äëÿ ïåðåêóñûâàíèÿ ïðîâîäîâ ïðè âûïîëíåíèè

ýëåêòðîìîíòàæíûõ ðàáîò.

Ðó÷íîé ñëåñàðíî-ìîíòàæíûé èíñòðóìåíò (äàëåå – èíñòðóìåíò) ñåðèè

ARMA2L 3 Ê2, Ê3 òîðãîâîãî çíàêà IEK ïðåäíàçíà÷åí äëÿ ïðîâåäåíèÿ

ýëåêòðîìîíòàæíûõ ðàáîò âáëèçè ïðîâîäíèêîâ ïîä ýëåêòðè÷åñêèì

íàïðÿæåíèåì èëè ñ äåòàëÿìè, íàõîäÿùèìèñÿ ïîä íàïðÿæåíèåì äî 1 000 Â.

Îñíîâíûå ñâåäåíèÿ îá èçäåëèè

Íîðìàëüíûìè óñëîâèÿìè ýêñïëóàòàöèè èíñòðóìåíòà ÿâëÿþòñÿ:

— ìàêñèìàëüíàÿ îòíîñèòåëüíàÿ âëàæíîñòü âîçäóõà 80 % ïðè 25 °Ñ.

Äîïóñêàåòñÿ ýêñïëóàòàöèÿ ïðè òåìïåðàòóðå 70 °Ñ ïðè ìàêñèìàëüíîì

çíà÷åíèè îòíîñèòåëüíîé âëàæíîñòè âîçäóõà 20 %.

Â ñîñòàâ ðó÷íîãî ñëåñàðíî-ìîíòàæíîãî èíñòðóìåíòà âõîäÿò øàðíèðíî-

ãóáöåâûå èíñòðóìåíòû è îòâåðòêè.

Ïàññàòèæè ñåðèè Ê3 è ñåðèè Ê2 òîâàðíîãî çíàêà IEK (äàëåå —

ïàññàòèæè) — ìíîãîôóíêöèîíàëüíûé ðó÷íîé èíñòðóìåíò, ïðåäíàçíà÷åí

äëÿ âûïîëíåíèÿ ðåãëàìåíòíûõ è ìîíòàæíûõ ðàáîò ïîä íàïðÿæåíèåì.

Ïàññàòèæè îáúåäèíÿþò â ñåáå ôóíêöèè:

— ïëîñêîãóáöåâ;

— òåìïåðàòóðà îêðóæàþùåé ñðåäû îò ìèíóñ 20 °Ñ äî ïëþñ 50 °Ñ;

— ïðèñïîñîáëåíèÿ äëÿ çàõâàòà è çàæèìà ðàçíîîáðàçíûõ ïî ôîðìå

äåòàëåé, â òîì ÷èñëå è öèëèíäðè÷åñêèõ.

Êàáåëåðåçû ñåðèè Ê2 òîâàðíîãî çíàêà IEK (äàëåå — êàáåëåðåçû)

ïðåäíàçíà÷åíû äëÿ ðåçêè ìåäíîãî è àëþìèíèåâîãî îäíîæèëüíîãî

è ìíîãîæèëüíîãî ïðîâîäà ïðè ïðîâåäåíèè ýëåêòðîìîíòàæíûõ ðàáîò.

Òîíêîãóáöû ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå — òîíêîãóáöû)

ïðåäíàçíà÷åíû äëÿ ôèãóðíîãî ñãèáàíèÿ ïðîâîëîêè ïðè ïðîâåäåíèè

ýëåêòðîìîíòàæíûõ ðàáîò.

Îòâ¸ðòêè äèýëåêòðè÷åñêèå ñåðèè Ê3 è ñåðèè Ê2 òîâàðíîãî çíàêà IEK

(äàëåå — îòâ¸ðòêè) ïðåäíàçíà÷åíû äëÿ çàêðó÷èâàíèÿ è îòêðó÷èâàíèÿ

ÈÍÑÒÐÓÌÅÍÒ ÄÈÝËÅÊÒÐÈ×ÅÑÊÈÉ

ÑËÅÑÀÐÍÎ-ÌÎÍÒÀÆÍÛÉ

Êëåùè ïåðåñòàâíûå ñåðèè Ê3 òîâàðíîãî çíàêà IEK (äàëåå — êëåùè)

ïðåäíàçíà÷åíû äëÿ çàõâàòà ïëîñêèõ, êðóãëûõ è ìíîãîãðàííûõ äåòàëåé.

Øàðíèðíî-ãóáöåâûå èíñòðóìåíòû ñåðèè Ê3 è ñåðèè Ê2 ÿâëÿþòñÿ

äèýëåêòðè÷åñêèìè è ðàññ÷èòàíû íà èñïîëüçîâàíèå ïîä íàïðÿæåíèåì

äî 1 000 Â.

Ñîñòàâ íàáîðîâ èíñòðóìåíòà ïðèâåäåíû â òàáëèöå 4.

Îñíîâíûå ïàðàìåòðû èíñòðóìåíòà â ñîîòâåòñòâèè ñ ðàçìåðàìè

ïðèâåäåíû â òàáëèöàõ 1 è 2.

Îòâ¸ðòêè äèýëåêòðè÷åñêèå ñîîòâåòñòâóþò òðåáîâàíèÿì ÃÎÑÒ 21010,

ÃÎÑÒ 12.2.007.0.

Êîìïëåêòíîñòü

Êîìïëåêò ïîñòàâêè èçäåëèé ïðèâåäåí â òàáëèöå 3.

Ìåðû áåçîïàñíîñòè

Øàðíèðíî-ãóáöåâûå èíñòðóìåíòû ñåðèè Ê3 è ñåðèè Ê2 ñîîòâåòñòâóþò

òðåáîâàíèÿì ÃÎÑÒ IEC 60900, ÃÎÑÒ 12.2.007.0.

ÇÀÏÐÅÙÀÅÒÑß

ÈÑÏÎËÜÇÎÂÀÒÜ ÄÈÝËÅÊÒÐÈ×ÅÑÊÈÉ ÈÍÑÒÐÓÌÅÍÒ

Â ÝËÅÊÒÐÎÓÑÒÀÍÎÂÊÀÕ Ñ ÍÀÏÐßÆÅÍÈÅÌ ÑÂÛØÅ 1000 Â.

âèíòîâ è øóðóïîâ ñ ïðÿìûì èëè êðåñòîîáðàçíûì øëèöåì â ñîîòâåòñòâèè

ñ òèïîì è íîìåðîì øëèöåâ.

Òåõíè÷åñêèå äàííûå

Êëàññ çàùèòû îò ïîðàæåíèÿ ýëåêòðè÷åñêèì òîêîì:

II ïî ÃÎÑÒ 12.2.007.0.

ÇÀÏÐÅÙÀÅÒÑß

ÐÀÁÎÒÀÒÜ ÈÍÑÒÐÓÌÅÍÒÎÌ Ñ ÏÎÂÐÅÆÄ¨ÍÍÎÉ ÈÇÎËßÖÈÅÉ!

Êðóãëîãóáöû ñåðèè Ê3 òîâàðíîãî çíàêà IEK (äàëåå — êðóãëîãóáöû)

ïðåäíàçíà÷åíû äëÿ òî÷å÷íîãî çàõâàòà ïðîâîëîêè, ìåòàëëè÷åñêîé æèëû,

ïðóòêà, è âûïîëíåíèÿ ðàâíîìåðíîãî èçãèáà. Îñíîâíîå ïðåäíàçíà÷åíèå

êðóãëîãóáöåâ — ñãèáàíèå ïðîâîëîêè è óçêèõ òîíêèõ ïëàñòèí.

ÂÍÈÌÀÍÈÅ

Ïåðåä íà÷àëîì ðàáîòû âíèìàòåëüíî èçó÷èòå ðóêîâîäñòâî

ïî ýêñïëóàòàöèè è óêàçàíèÿ ïî òåõíèêå áåçîïàñíîñòè

ïðè ðàáîòå c äèýëåêòðè÷åñêèì èíñòðóìåíòîì.

— ðàáîòàòü â äèýëåêòðè÷åñêîé îáóâè èëè ñòîÿ íà èçîëèðóþùåé

ïîäñòàâêå, ëèáî íà äèýëåêòðè÷åñêîì êîâðèêå.

Èñïîëüçóéòå îòâ¸ðòêè è øàðíèðíî-ãóáöåâûé èíñòðóìåíò

òîëüêî ïî íàçíà÷åíèþ. Íå ïðèìåíÿéòå èíñòðóìåíò â êà÷åñòâå ðû÷àãà,

çóáèëà, óäàðíîãî èíñòðóìåíòà, êëèíà.

Ïðè ïåðåêóñûâàíèè ïðîâîëîêè èñïîëüçóéòå çàùèòíûå ýêðàíû (øèðìû)

è ñðåäñòâà èíäèâèäóàëüíîé çàùèòû: î÷êè, çàùèòíûå ëèöåâûå ìàñêè,

ïåð÷àòêè, îäåæäó, îáóâü è ãîëîâíûå óáîðû.

Íå óäàðÿéòå ìîëîòêîì ïî âåðõíåé ãóáêå èíñòðóìåíòà ïðè

ïåðåêóñûâàíèè ïðîâîëîêè, òàê êàê ýòî ïðèâåä¸ò ê ïîëîìêå èíñòðóìåíòà.

Îçíàêîìüòåñü ñ íàçíà÷åíèåì èíñòðóìåíòà, åãî êîíñòðóêöèåé

è ðóêîâîäñòâîì ïî ýêñïëóàòàöèè.

Íåâûïîëíåíèå ïðàâèë òåõíèêè áåçîïàñíîñòè

ýëåêòðîìîíòàæíûõ ðàáîò ìîæåò ñòàòü ïðè÷èíîé òÿæ¸ëîé

ýëåêòðè÷åñêîé òðàâìû è âûõîäà èíñòðóìåíòà èç ñòðîÿ.

Âûáèðàéòå èíñòðóìåíò, ñîîòâåòñòâóþùèé âèäó ðàáîò.

ÂÍÈÌÀÍÈÅ

— îãðàäèòü ðàñïîëîæåííûå âáëèçè ðàáî÷åãî ìåñòà äðóãèå

òîêîâåäóùèå ÷àñòè, íàõîäÿùèåñÿ ïîä íàïðÿæåíèåì, ê êîòîðûì âîçìîæíî

ñëó÷àéíîå ïðèêîñíîâåíèå;

Âûáèðàéòå îòâ¸ðòêó, ñîîòâåòñòâóþùóþ òèïó êðåï¸æíîãî ýëåìåíòà.

Òèïû øëèöåâ îòâ¸ðòîê PH è PZ ïîõîæè, íî íå ÿâëÿþòñÿ

Ðàáîòàéòå òîëüêî èñïðàâíûì èíñòðóìåíòîì. Ïåðåä êàæäûì

ïðèìåíåíèåì èíñòðóìåíò äîëæåí áûòü îñìîòðåí. Èçîëèðóþùèå ïîêðûòèÿ

ðóêîÿòîê íå äîëæíû èìåòü äåôåêòîâ, êîòîðûå ïðèâîäÿò ê ñíèæåíèþ

ìåõàíè÷åñêîé ïðî÷íîñòè. Íå äîëæíî áûòü òðåùèí, ñëîìàííûõ ãóáîê,

ðóêîÿòîê.

Óäåðæèâàéòå èíñòðóìåíò òàê, ÷òîáû êèñòü ðóêè âî âðåìÿ ðàáîòû

ðàñïîëàãàëàñü äî ïðåäîõðàíèòåëüíîãî óïîðà ðóêîÿòîê. Íåïðàâèëüíûé

çàõâàò ðóêîÿòîê ìîæåò ïðèâåñòè ê òðàâìå.

Óäåðæèâàéòå èíñòðóìåíò ïîä óãëîì 90° ê ýëåìåíòàì, êîòîðûå

òðåáóåòñÿ ïåðåêóñèòü.

ÂÍÈÌÀÍÈÅ

Ïðè ðàáîòå â ýëåêòðîóñòàíîâêàõ íàïðÿæåíèåì äî 1 000 Â áåç ñíÿòèÿ

íàïðÿæåíèÿ íà òîêîâåäóùèõ ÷àñòÿõ èëè âáëèçè íèõ íåîáõîäèìî:

Ïðàâèëà ýêñïëóàòàöèè

Ïî îêîí÷àíèè ðàáîòû î÷èñòèòå èíñòðóìåíò âåòîøüþ. Íå èñïîëüçóéòå

äëÿ î÷èñòêè ïëàñòèêîâîé ðóêîÿòêè ðàñòâîðèòåëè è íåôòåïðîäóêòû.

Òðàíñïîðòèðîâàíèå èíñòðóìåíòà îñóùåñòâëÿåòñÿ â óïàêîâêå

èçãîòîâèòåëÿ ëþáûì âèäîì êðûòîãî òðàíñïîðòà, îáåñïå÷èâàþùèì

ïðåäîõðàíåíèå óïàêîâàííûõ èçäåëèé îò ìåõàíè÷åñêèõ ïîâðåæäåíèé,

çàãðÿçíåíèÿ è ïîïàäàíèÿ âëàãè, ïðè òåìïåðàòóðå îêðóæàþùåãî âîçäóõà

îò ìèíóñ 40 °Ñ äî ïëþñ 50 °Ñ.

Òðàíñïîðòèðîâàíèå, õðàíåíèå è óòèëèçàöèÿ

Õðàíåíèå èíñòðóìåíòà íåîáõîäèìî îñóùåñòâëÿòü â óïàêîâêå

èçãîòîâèòåëÿ â ïîìåùåíèÿõ ñ åñòåñòâåííîé âåíòèëÿöèåé ïðè òåìïåðàòóðå

îêðóæàþùåãî âîçäóõà îò ìèíóñ 40 °Ñ äî ïëþñ 50 °Ñ è ìàêñèìàëüíîé

îòíîñèòåëüíîé âëàæíîñòè 98 % ïðè 25 °Ñ.

Ñðîê ñëóæáû èíñòðóìåíòà – íå ìåíåå 5 ëåò.

Óòèëèçàöèÿ èíñòðóìåíòà ïðîèçâîäèòñÿ ïî òðåáîâàíèÿì

çàêîíîäàòåëüñòâà íà òåððèòîðèè ðåàëèçàöèè.

Õðàíèòå èíñòðóìåíò â òðóäíîäîñòóïíîì äëÿ äåòåé ìåñòå.

Îáñëóæèâàíèå

Ñðîê ñëóæáû è ãàðàíòèè èçãîòîâèòåëÿ

Õðàíèòå èíñòðóìåíò â ïîìåùåíèè, íå ñîäåðæàùåì àãðåññèâíîé ñðåäû,

ïîâûøåííîé âëàæíîñòè, òåìïåðàòóðû è ïðÿìûõ ñîëíå÷íûõ ëó÷åé.

Ãàðàíòèéíûé ñðîê ýêñïëóàòàöèè èíñòðóìåíòà – 1 ãîä ñî äíÿ ïðîäàæè

ïðè ñîáëþäåíèè ïîòðåáèòåëåì ïðàâèë ýêñïëóàòàöèè, òðàíñïîðòèðîâàíèÿ

è õðàíåíèÿ.

Èñïîëüçóéòå ïîäõîäÿùèé òåìï ðàáîòû. Ðàáîòàéòå èíñòðóìåíòîì

íå òîðîïÿñü, áåç ñïåøêè.

âçàèìîçàìåíÿåìûìè. Íå ïðèìåíÿéòå îòâ¸ðòêè òèïà PH äëÿ âèíòîâ ñ òèïîì

øëèöåâ êîíòàêòíîé ÷àñòè PZ è íàîáîðîò.

Äèýëåêòðè÷åñêèé èíñòðóìåíò ðåìîíòó íå ïîäëåæèò. Â ñëó÷àå ïîëîìêè

ãóáîê, ðóêîÿòîê, ïîâðåæäåíèÿ èçîëÿöèè èíñòðóìåíòà, îáðàçîâàíèÿ òðåùèí,

ãëóáîêîé êîððîçèè – èíñòðóìåíò çàìåíèòü.

Ïî èñòå÷åíèè ñðîêà ñëóæáû ïðîâåñòè ýëåêòðè÷åñêèå èñïûòàíèÿ

èçîëèðóþùèõ ðóêîÿòîê èíñòðóìåíòà ïî ÃÎÑÒ IEC 60900.

Ïðè ïîäòâåðæäåíèè äèýëåêòðè÷åñêèõ ïàðàìåòðîâ èíñòðóìåíòà âîçìîæíà

åãî äàëüíåéøàÿ ýêñïëóàòàöèÿ.

Basic product data

Hand-held fitting and assembly tools include hinged pliers and screwdrivers.

— side cutting pliers for wire cutting;

Needle nose pliers of K1 series of IEK trademark (hereinafter — needle nose

pliers) are designed for shaped bending of wire during electrical installation

works.

Side pliers of K3 series and K2 series of IEK trademark (hereinafter — pliers)

are designed for cutting wires when performing wiring works.

Operation at temperature of 70 °C at a maximum relative humidity of 20 %

is allowed.

— gripping and clamping devices for various shapes of parts, including

cylindrical ones.

— ambient temperature from minus 20 °C to plus 50 °Ñ;

Ñombination pliers of K3 series and K2 series of IEK trademark

(hereinafter — the pliers) — multifunctional hand tool, designed for maintenance

and installation works under voltage.

Ñombination pliers combine the functions of:

Dielectric screwdrivers of K3 series and K2 series of IEK trademark

(hereinafter — screwdrivers) are designed for screwing and unscrewing screws

and wood screws with straight or Phillips slots according to the type and number

of slots.

Hand-held fitting and assembly tool (hereinafter — the tool)

of ARMA2L 3 K2, K3 series of IEK trademark is designed for performing electrical

installation works near electrically energized conductors or with parts that are

energized up to 1 000 V.

— maximum relative humidity of 80 % at 25 °Ñ.

Cable cutters of K2 series of IEK trademark (hereinafter — cable cutters) are

designed for cutting copper and aluminum solid and stranded wire during

electrical installation works.

Normal operating conditions for the tool are as follows:

— flat nose pliers;

EN DIELECTRIC FITTING AND ASSEMBLY TOOL

Hinged pliers of the K3 series and K2 series are dielectric and designed

for use with voltages up to 1 000 V.

Electric shock protection class: II.

Technical data

Adjustable pliers of K3 series of IEK trademark (hereinafter — the pliers) are

designed for gripping flat, round and multi-sided parts.

The contents of the tool kits are shown in table 4.

The delivery set of the products is shown in table 3.

Round nose pliers of K3 series of IEK trademark (hereinafter — the round

nose pliers) are designed for gripping wire, metal wire, rod, and performing a

uniform bend. The main purpose of round nose pliers is to bend wire and narrow

thin plates.

Hinged pliers of K3 series and K2 series meet the requirements

of IEC 60900.

The main parameters of the tool according to the dimensions are given

in tables 1 and 2.

Completeness of set

Safety precautions

IT IS FORBIDDEN

TO USE DIELECTRIC TOOLS IN ELECTRICAL INSTALLATIONS

WITH VOLTAGES OVER 1 000 V.

ATTENTION

Before starting work, carefully read the operating manual

and safety instructions for dielectric tools.

IT IS FORBIDDEN

ATTENTION

Disregard for the safety regulations for electrical installation works

may cause severe electrical injuries and failure of the tool.

TO WORK WITH TOOLS WITH DAMAGED INSULATION!

Work only with tools that are in good condition. The tool should be inspected

before each use. The insulating coatings of the handles should be free of defects

that lead to a reduction in mechanical strength. There should be no cracks,

broken jaws or handles.

Familiarize yourself with the purpose of the tool, its design and operating

manual.

Operating rules

ATTENTION

Use screwdrivers and pliers only for their intended purpose.

Do not use the tool as a lever, chisel, impact tool, and wedge.

— work in dielectric shoes or standing on an insulating mat or on

a dielectric mat.

Hold the tool at a 90° angle to the part you want to cut.

Choose the right tool for the type of work.

Choose the right screwdriver for the type of fastener. PH and PZ screwdrivers

have similar but not interchangeable slots. Do not use PH screwdrivers for screws

with PZ contact slot and vice versa.

Use an appropriate pace of work. Handle with the tool slowly, without

rushing.

Dielectric tools cannot be repaired. In case of breakage of jaws, handles,

damage of tool insulation, formation of cracks, deep corrosion — replace the

tool.

When cutting wire, use protective shields (screens) and personal protective

equipment: goggles, face masks, gloves, clothing, shoes, and hats.

At the end of the service life, carry out electrical tests of the insulating

handles of the tool according to IEC 60900. If the dielectric parameters of the tool

are confirmed, further operation is possible.

— protect other live parts near the workplace that are energized and could

be accidentally touched;

When working in electrical installations with voltages of up to 1 000 V without

removing the voltage on or near live parts, you must:

Do not hit the upper jaw of the tool with a hammer when you cut the wire,

as this will cause tool breakage.

Hold the tool so that the hand reaches the safety stop of the handles during

operation. Improper grip of the handles could cause injury.

Service life and manufacturer's warranty

The tool is transported in the manufacturer's package by any type of covered

transport that protects the packed products from mechanical damage,

contamination and moisture, at ambient air temperature from minus 40 °Ñ

to plus 50 °Ñ.

Transportation, storage and disposal

The tool is disposed of in accordance with the legislation in the sales

territory.

The warranty period is 1 year from the date of sale, provided the user

observes the rules of operation, transportation and storage.

Tool service life — at least 5 years.

The tool should be stored in the manufacturer's package in rooms with

natural ventilation at ambient air temperature from minus 40 °Ñ to plus 50 °Ñ

and maximum relative humidity of 98 % at 25 °Ñ.

Maintenance

Clean the tool with a rag at the end of work. Do not use solvents or petroleum

products to clean the plastic handles.

Store the tool in a room free of corrosive environments, high humidity,

temperature, and direct sunlight.

Keep the tool out of the reach of children.

Òèï èçäåëèÿ / Product type

Àðòèêóë / Order code

Äëèíà, ìì /

Length, mm

Ïàññàòèæè / Ñombination pliers

ñåðèè Ê2 / of Ê2 series

A2L3-PL20-K2-160

160

A2L3-PL20-K2-180

180

A2L3-PL20-K2-200

200

ñåðèè Ê3 / of Ê3 series

A2L3-PL20-K3-160

160

A2L3-PL20-K3-180

180

A2L3-PL20-K3-200

200

Êóñà÷êè áîêîâûå / Side cutting pliers

ñåðèè Ê2 / of Ê2 series

A2L3-PC20-K2-160

160

ñåðèè Ê3 / of Ê3 series

A2L3-PC20-K3-160

160

Êóñà÷êè áîêîâûå óñèëåííûå / Reinforced side-

cutting pliers

ñåðèè Ê2 / of Ê2 series

A2L3-HC20-K2-180

180

ñåðèè Ê3 / of Ê3 series

A2L3-HC20-K3-180

180

Êðóãëîãóáöû / Round-nose pliers

ñåðèè Ê3 / of Ê3 series

A2L3-RN20-K3-160

160

Òîíêîãóáöû / Needle-nose pliers

ñåðèè Ê2 / of Ê2 series

A2L3-LN20-K2-160

160

ñåðèè Ê3 / of Ê3 series

A2L3-LN20-K3-160

160

Òîíêîãóáöû èçîãíóòûå / Ñurved needle-nose pliers

ñåðèè Ê2 / of Ê2 series

A2L3-BN20-K2-160

160

ñåðèè Ê2 / of Ê2 series

A2L3-BN20-K3-160

160

Êàáåëåðåç / Cable cutter

ñåðèè Ê2 / of Ê2 series

A2L3-CC20-K2-160

160

A2L3-CC20-K2-250

250

ñåðèè Ê3 / of Ê3 series

A2L3-CC20-K3-160

160

A2L3-CC20-K3-250

250

Ñòðèïïåð äèýëåêòðè÷åñêèé / Dielectric stripper

ñåðèè Ê3 / of Ê3 series

A2L3-SP20-K3-160

160

Êëåùè ïåðåñòàâíûå / Adjustable pliers

ñåðèè Ê3 / of Ê3 series

A2L3-JP20-K3-250

250

Òàáëèöà / Table 1 – Òåõíè÷åñêèå äàííûå øàðíèðíî-ãóáöåâîãî èíñòðóìåíòà /

Technical data of pliers

Òàáëèöà / Table 2 – Òåõíè÷åñêèå äàííûå îòâåðòîê /

Technical data of screwdrivers

Òèï èçäåëèÿ / Product type

Àðòèêóë / Order code

Òèï íàêîíå÷íèêà /

Types of screwdriver tips

Ðàçìåð øëèöà ґ äëèíà

îòâ¸ðòêè, ìì / Screwdriver

slot size ґ length, mm

Îòâ¸ðòêà äèýëåêòðè÷åñêàÿ

êðåñòîâàÿ ñåðèè Ê2 /

Dielectric Phillips screwdriver

of Ê2 series

A2L3-SC30-K2-PH-00-075

0ґ75

A2L3-SC30-K2-PH-10-080

1ґ80

A2L3-SC30-K2-PH-20-100

2ґ100

A2L3-SC30-K2-PZ-00-075

0ґ75

A2L3-SC30-K2-PZ-10-080

1ґ80

A2L3-SC30-K2-PZ-20-100

2ґ100

Ïðîäîëæåíèå òàáëèöû / Continion table 2

Òèï èçäåëèÿ / Product type

Àðòèêóë / Order code

Òèï íàêîíå÷íèêà /

Types of screwdriver tips

Ðàçìåð øëèöà ґ äëèíà

îòâ¸ðòêè, ìì / Screwdriver

slot size ґ length, mm

Îòâ¸ðòêà äèýëåêòðè÷åñêàÿ

øëèöåâàÿ ñåðèè Ê2 /

Dielectric flathead

screwdriver of Ê2 series

A2L3-SC30-K2-SL-25-075

2,5ґ75

A2L3-SC30-K2-SL-35-075

3,5ґ75

A2L3-SC30-K2-SL-40-100

4ґ100

A2L3-SC30-K2-SL-55-125

5,5ґ125

A2L3-SC30-K2-SL-65-150

6,5ґ150

Îòâ¸ðòêà äèýëåêòðè÷åñêàÿ

êðåñòîâàÿ ñåðèè Ê3 /

Dielectric Phillips screwdriver

of Ê3 series

A2L3-SC30-K3-PH-00-075

0ґ75

A2L3-SC30-K3-PH-10-080

1ґ80

A2L3-SC30-K3-PH-20-100

2ґ100

A2L3-SC30-K3-PH-30-150

3ґ150

A2L3-SC30-K3-PZ-00-075

0ґ75

A2L3-SC30-K3-PZ-10-080

1ґ80

A2L3-SC30-K3-PZ-20-100

2ґ100

Îòâ¸ðòêà äèýëåêòðè÷åñêàÿ

øëèöåâàÿ ñåðèè Ê3 /

Dielectric flathead

screwdriver of Ê3 series

A2L3-SC30-K3-SL-25-075

2,5ґ75

A2L3-SC30-K3-SL-40-100

4ґ100

A2L3-SC30-K3-SL-55-125

5,5ґ125

A2L3-SC30-K3-SL-65-150

6,5ґ150

Òàáëèöà / Table 3

Íàèìåíîâàíèå / Denomination

Êîëè÷åñòâî, øò. (ýêç.) / Quantity, pcs (copies)

Èçäåëèå / Product

Ïëàñòèêîâûé ïîäâåñ / Plastic hanger

Altri manuali per ARMA2L 3 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IEK Utensili

IEK

IEK ARMA2L 3 Series Manuale utente

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare