Innovation VIEWLIGHT DLR-700 Manuale utente
CONTENT
1 Product introduction........................................................................................................................1
2 Safe Notice......................................................................................................................................2
2.1 Notice in operation..................................................................................................................2
2.2 Notice in storage .....................................................................................................................3
2.3 Notice in moving.....................................................................................................................3
2.4 Notice in assembling...............................................................................................................3
2.5 Notice in wires connection......................................................................................................4
2.6 Notice after operation .............................................................................................................5
2.7 Notice in maintenance.............................................................................................................5
2.8 Notice in accident ...................................................................................................................5
2.9 Marks on machine...................................................................................................................6
3 Introduction to machine ..................................................................................................................7
3.1 Main body...............................................................................................................................7
3.2 Operation panel.......................................................................................................................9
4 Operation ......................................................................................................................................13
4.1 Assembling............................................................................................................................13
4.2 Test...................................................................................................................................13
4.3 Operation ..............................................................................................................................14
4.3.1 Lens settings.............................................................................................................14
4.3.2 Lens measurement...................................................................................................15
5 Maintenance..................................................................................................................................26
5.1 daily care............................................................................................................................26
5.2 replacement of materials ....................................................................................................27
5.3 machine clean........................................................................................................................27
5.4 notice in moving ..............................................................................................................28
5.5 service information ............................................................................................................28
6 Simple fault phenomenon and solution.........................................................................................29
6.1 solution to general problem...................................................................................................29
7 Performance parameter .................................................................................................................31
8 Attached list （packing parts）...................................................................................................32
Auto lens meter operation manual
1
1 Product introduction
DLR-700 can measure the degree of single vision lens, double vision
lens, three visions lens and progressive lens (PPL)quickly and precisely.
This machine has LCD touch screen, on which can show the measured data
and PD of left and right eyes. And it also can show the centering by diagram
marks on the screen and it can help to adjust the optical center of lens
quickly. The 7-inch high-resolution TFT touch screen can show everything
smooth and fine.
There is brief menu. Just pressing the keys on the screen, the graphs
will show their functions accurately.
LM-700 is the auto lens meter which is specialized for lens measurement.
The Implementation of the enterprise standard Q31/0113000121C001-2016,
which is in the line with the national metrological verification procedures
lens meter JJG 580—2005.
The max degree of this machine:±25.00D.
The function direction of DLR-700
Model DLR-700
Sphere √
Cylinder √
Prism √
Progressive √
Color lens √
PD，PH √
Print √
Remarks With PD,PH and Print
Auto lens meter operation manual
2
2 Safe Notice
In this manual, the following marks mean the safe notice, please refer to
the follow:
Notice：there will be dangerous. If not avoid, it can cause damage.
Notice：there will be dangerous, if not avoid, it can cause damage to
the function of machine.
2.1 Notice in operation
Notice：
●Don’t open or touch the inner part of machine if not necessary, or it may cause
electric shock or make problem to machine.
●To use the stipulated voltage, if too high or too low, it will influence the
operation or even cause damage to machine or result in electric shock.
●Don’t put the wires under machine, or it will break the wires and cause
cutting-out, fire disaster or electric shock.
●
If the metal core of wires is exposed, it should be exchanged right
away,otherwise, it will cause fire disaster or electric shock.
Auto lens meter operation manual
3
2.2 Notice in storage
Notice：
2.3 搬动时应注意的事项
2.3 Notice in moving
2.4 Notice in assembling
Notice：
●Don’t put the machine at some place humid or poisonous or with corrosive
liquid or air.
●Don’t put machine under the sunshine. To keep the suitable temperature and
humidness.
●Notice: if the change of the outside temperature is too big, it will influence the
operation of machine. Then it just need to put machine under the stable
temperature for 3-10 hours, then it can be operated normally.
●Don’t pull the wires or cable, which will damage the machine or hurt people.
●Don’t take machine by seizing the LCD screen when moving machine. You
should hold the base by hands. Or it will hurt people or damage machine.
●Don’t put machine in humid place. Any water into machine will cause electric
shock or other machine problem.
●To put machine at smooth place. Any shake during operation will make
machine fall down and may hurt people or damage machine.
Auto lens meter operation manual
4
Notice：
2.5 Notice in wires connection
Notice：
●Don’t operate machine under sunshine or near filament lamp. Don’t install
machine on the place that the surface with strong light reflect, like glass show
box, mirror or polishing desk. Otherwise, these situation will influence the
operation or make error.
●Don’t operate machine at the place against electric fans or air conditioner,
otherwise the dust will be flowed into machine which will influence the
preciseness of measured data.
●Don’t operate the machine at the place with dust or humid and hot, which
will influence operation.
●Don’t put too many plugs on one power socket, which will make it too hot and
cause fire disaster.
●There must be ground connection to the power supply to protect the security of
people and machine.
Auto lens meter operation manual
5
2.6 Notice after operation
Notice：
2.7 Notice in maintenance
Notice：
2.8 Notice in accident
Notice：
●To cut off power supply when not run the machine, and put on the dust cover.
Long time connection to power supply will short the usage life of machine. And
without dust for long time, the falling dust will influence the preciseness of
machine.
●Not operate machine for long time, please pull the plug out from power socket,
in case to prevent from fire disaster.
●If there is any problem with machine and need to take down the machine for
check, please contact with our agent or our branch office. You need to take all
the responsible to any damage to machine from your personal action to it.
●Don’t scrape the protecting lens which under the lens base, otherwise it will
very influence the preciseness of measured data.
●If the LCD screen broken, to knock it into pieces and wash and sweep them
away by alcohol, then to burn them down. If hands touch the liquid crystal, then
to wash hands with water right away.
Auto lens meter operation manual
6
2.9 Marks on machine
Please read the manual carefully.
○It means that the power supply be off.
| It means that the power supply be on
Auto lens meter operation manual
7
3 Introduction to machine
3.1 Main body
Figure 3.1 Outlooking of main body
●lens fixing frame: when fixing the lens, to up the frame and down it
with gentle. When take down lens, to up the frame till there is a sound
like “ka”, then the frame will be locked.
●Sliding nose frame: which used for measuring PD. To put the nose pad
Switch
lens fixing
frame
Sliding nose
pad frame
Lens base
Lens table
Point button
Lens table knob
printer
Memory switch
Auto lens meter operation manual
8
on the frame and move the frame, the PD will be measured out
automatically.
Figure 3.2 injections on the back of machine
●Lens base: which used for putting lens and as the basic point of
measurement. Dust cover: which used for protecting machine from dust.
Before operating machine, please take down the dust cover.
●Switch ：short-time press to turn on machine, and longer press to turn
off machine.
Port
Out power
injection
USB
connection
Fuse cover
Indice
