Johnson 40-6590 Manuale utente

JLX®Horizontal/Vertical Tracking Rotary

ith GreenBrite®Technology

Model No. 40-6590

Instruction Manual

Congratulations on your choice of this JLX®Horizontal/Vertical Tracking

Rotary with GreenBrite®Technology. We suggest you read this instruction

manual thoroughly before using the instrument and sa e this instruction

manual for future use.

This is a Class III laser tool and is manufactured to comply with CFR 21,

parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

2810i-C l r_Manuals 5/2/18 2:15 PM Page 1

able of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Battery Installation

7. Operating Instructions

8. Application Demonstrations

9. Troubleshooting Guide

10. Accuracy Check

11. Technical Specifications

12. Care and andling

13. Product Warranty

14. Warranty Registration

15. Accessories

1. Kit Contents

Description for Model 40-6590 Qty.

Tracking Rotary Laser 1

Detector with Clamp and 4 “AA” Alkaline Batteries 1

Remote Control with 2 “AA” Alkaline Batteries 1

Tinted Glasses 1

6.4V Battery Charger 1

NiM Rechargeable Battery Pack 1

“C” Alkaline Battery Compartment (batteries not included) 1

Instruction Manual 1

ard-Shell Carrying Case 1

Vertical Leveling Plate 1

2810i-C l r_Manuals 5/2/18 2:15 PM Page 2

2. Features and Functions

• Electronic self-leveling with horizontal and vertical

operating modes.

• Out of level indicator - if laser beam is out of its ±5°

self-leveling range, an alarm occurs.

• Vertical and horizontal working modes and 90° split beam for

layout work.

• Tilt indicator stops the laser beam rotation and flashes an alert

when the unit is bumped to ensure accuracy.

• Dual-slope mode allows the user to perform slope adjustments

in both the X- and Y-axis.

• Tracking mode sets slope automatically based on the detector’s

position.

• Scan mode simulates a laser line or dot.

• Two rotational speeds: 300 RPM and 800 RPM.

• Water and dust resistant.

2810i-C l r_Manuals 5/2/18 2:15 PM Page 3

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class III Laser Product

Max. Power Output: ≤5mW

Wavelength: 510-530nm

HIS OOL EMI S LASER RADIA ION.

DO NO S ARE IN O BEAM.

AVOID DIREC EYE EXPOSURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from the tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

2810i-C l r_Manuals 5/2/18 2:15 PM Page 4

4. Location/Content of Warning Labels

510-530nm

2810i-C l r_Manuals 5/2/18 2:15 PM Page 5

5. Location of Parts/Components

Rotating Laser

Output Window

90º Split Beam

Green Dot

Output Window

Tilt Mode

Button

Tilt Mode LED

Keypad

X-Axis LED

Power Button

Battery Cover

Screw

5/8″-11 Tripod

Screw Thread

Power LED

Remote

Control LED

Rotational

Speed Button

Y-Axis LED

Remote

Control Button

2810i-C l r_Manuals 5/2/18 2:15 PM Page 6

Decrease Slope Button

Scan Mode Adjustment

Clockwise Button

Rotational Speed Button

Remote Control Keypad

Operational LED

Power Button

Scan Mode Button

Increase Slope

Button

Scan Mode Adjustment

Counterclockwise

Button

2810i-C l r_Manuals 5/2/18 2:16 PM Page 7

6. Battery Installation

Notes:

• Always make sure that the laser level is powered off before

removing and/or replacing batteries. The unit requires either

alkaline batteries or the included rechargeable battery pack.

• Remove the batteries when storing the instrument for an

extended period of time (more than three months) to avoid

damage to the tool should the batteries deteriorate.

Alkaline Battery Installation

1. Unscrew the battery cover screw in a

counterclockwise direction to pull open

the battery cover.

2. Insert four “C” alkaline batteries into the

battery compartment according to the

polarity illustrated inside.

3. Push the battery cover closed.

4. Screw in the battery cover screw in a clockwise direction to lock

the battery cover.

Rechargeable Battery Pack Installation

1. Insert the battery charger into an AC outlet and into the

rechargeable battery pack to charge the batteries. The charger

light is red while it is charging and turns green when the battery

is fully charged.

2. Unscrew the battery cover screw in a counterclockwise direction

to open and pull out the battery cover.

2810i-C l r_Manuals 5/2/18 2:16 PM Page 8

3. Insert the charged battery pack into the battery compartment.

4. Close the battery cover.

5. Screw in the battery pack’s cover screw in a clockwise direction

to lock the battery cover.

Low Battery Indicator

When the battery is low, the Power LED light will flash. To ensure

continued operation, replace the batteries or recharge the

battery pack.

Remote Control Battery Installation

1. Lift the battery cover latch up to open the remote control’s

battery cover.

2. Insert two “AA” alkaline batteries into the battery compartment

according to the polarity illustrated inside.

3. Press down on the battery cover until the battery latch clicks

into place.

2810i-C l r_Manuals 5/2/18 2:16 PM Page 9

7. Operating Instructions

IMPOR AN : It is the responsibility of the user to verify the

calibration of the instrument before each use.

Laser Level Placement

1. The laser level should be positioned on a relatively flat and level

surface. It need not be perfectly level.

2. The laser level can also be attached to a tripod via the 5/8″-11

tripod screw thread located on the base of the laser level.

3. The laser can be used on the floor in vertical mode by attaching it

to the included vertical mounting plate.

Power On/Off the Laser Level

Press to power on/off the laser level.

Power LED: Lighted LED indicates power is on.

Extinguished LED indicates power is off.

Flashing LED indicates that the batteries are low.

Change Rotational Speed

Press on the remote control to change the rotating speed from

high (800 rpm) to low (300 rpm). This button is not functional

during the self-leveling sequence.

2810i-C l r_Manuals 5/2/18 2:16 PM Page 10

Indice

Altri manuali Johnson Strumento di misura

Johnson

Johnson 1888-1100 Manuale utente

Johnson

Johnson 1456-0000 Manuale utente

Johnson

Johnson 40-6519 Manuale utente

Johnson

Johnson 40-6648 Manuale utente

Johnson

Johnson 40-6624 Manuale utente

Johnson

Johnson 40-6527 Manuale utente

Johnson

Johnson 40-6705 Manuale utente

Johnson

Johnson 40-6502 Manuale utente

Johnson

Johnson 40-6625 Manuale utente

Johnson

Johnson JLX 40-6590 Manuale utente

Johnson

Johnson 40-6535 Manuale utente

Johnson

Johnson 40-6557 Manuale utente

Johnson

Johnson 40-6676 Manuale utente

Johnson

Johnson LDM100 Manuale utente

Johnson

Johnson 1888-0700 Manuale utente

Johnson

Johnson 40-6700 Manuale utente

Johnson

Johnson 40-6543 Manuale utente

Johnson

Johnson 40-6618 Manuale utente

Johnson

Johnson LEVEL UP 40-6535 Manuale utente

Johnson

Johnson 1886-0000 Manuale utente

Johnson

Johnson 40-6932 Istruzioni operative e di manutenzione

Johnson

Johnson 1454-0000 Manuale utente

Johnson

Johnson 40-6515 Manuale utente

Johnson

Johnson LDM85 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente