Johnson 40-6001 Manuale utente

Laser Distan e Measure

Model No. 40-6001

Instruction Manual

C ngratulati ns n y ur ch ice f this Laser Distance Measure. We

suggest y u read this instructi n manual th r ughly bef re using the

instrument. Save this instructi n manual f r future use.

This is a Class II laser t l and is manufactured t c mply with CFR 21,

parts 1040.10 and 1040.11 as well as internati nal safety rule IEC 285.

Table of Contents

1. Kit Contents . . . . . . . . . . pg. 2

2. Safety Information. . . . . . pg. 3

3. Location/Content of

Warning Labels . . . . . . . . pg. 4

4. Location of Parts/

Components . . . . . . . . pg. 5-7

5. Start Up - Battery Installation

Instructions . . . . . . . . . . . pg. 9

6. Using the Product . . pg. 11-23

Technical Specifications

. pg. 25

8. Product Warranty . . . . . pg. 26

9. Product Registration . . . pg. 27

1. Kit Contents

Description Qty.

Laser Distance Measure 1

Protection Cover 1

Wrist Strap 1

9V Battery 1

Instruction Manual 1

Soft-sided Pouch 1

2. afety Information

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may result in bodily injury.

CAUTION!

Class II Laser Product

Max. Power Output: ≤1mW

Wavelength: 640-660nm

THI TOOL EMIT LA ER RADIATION.

DO NOT TARE INTO BEAM.

AVOID DIRECT EYE EXPO URE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as the laser beam

could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally stare into the

laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as serious eye

injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the battery when storing the tool for an extended time (more than 3 months) to avoid

damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt to repair this

tool, warranty will be void.

3. Location/Content of Warning Labels

4. Location of Part/Components

1. Side Measure Button

2. Level Vial

3. Sound Port / Speaker

4. Tripod Thread 1/4 - 20

5. Battery Cover

6. Wrist Strap Bracket

7. LCD Display

8. Measure Button

9. Area, Volume, Stake-Out

10. Add/Count Up

11. Unit of Measure /

Max & Min Switch

12. Backlight/Continuous Laser Mode

13. Indirect Measurement/Pythagoras

14. Sound Activated Measure/

Memory Recall

15. Subtract/Count Down

16. Power/Clear/Escape

17. Measuring Reference Position /

Sound On/Off

1. Sub-Screen

2. Maximum & Minimum

Display

3. Add & Subtract

4. Memory Counter

5. Stake-Out

6. Measuring Function

Area Measuring

Volume Measuring

7. Measuring Mode

Normal Mode

Continuous Mode

8. Indirect Measuring

Single Pythagoras

Double Pythagoras

Double Pythagoras (partial

height)

9. Battery Status

10. Sub-Screen Unit of Measure

11. Sound Activated Mode

12. Laser Active

13.

Measurement Reference Position

14. Main Screen Unit of Measure

15. Main Screen

Measuring Reference

Range

Range is specified between a minimum 20-inches to a maximum of

165-feet with an accuracy of 1/16”. Longer ranges will be found by the

instrument but a variance in the accuracy may exist. At night or dusk

the range may be greater than during daylight or if the target has poor

reflective properties.

Target urfaces

Measuring errors may occur when aiming at surfaces composed of

colorless liquids (e.g. water), glass, Styrofoam or similar semi-permeable

surfaces. Aiming at high gloss surfaces may deflect the laser beam and

lead to measurement errors.

Hazards of Use

Be aware that errors in distance measurements may occur if the

instrument is defective or has been dropped, been misused or modified.

Note

Conduct periodic test measurements to ensure the instrument is measuring

accurately and consistently. This is most important if the instrument has

been exposed to abnormal use. Always confirm accuracy before and

during important measurements. Keep the laser distance measure optic

clean and inspect for damage.

1. Remove battery compartment lid.

2. Insert 9v battery observing correct

polarity.

3. Close battery compartment lid.

4. Replace battery when the

flashes on screen. When this icon

appears there are approximately 100 measurements remaining.

Note

Use only alkaline batteries. If the instrument will not be used for an

extended time, remove the batteries to protect against corrosion.

Power Button

Press Power Button 1 X to power up.

Press and hold Power Button to power off.

This instrument powers off automatically after three minutes of inactivity.

Backlight

Press Backlight Button 1 X to activate backlight.

5. tart Up - Battery Installation

ound (Beep)

Press & Hold Measuring Reference Position until you hear a beep to

de-activate Sound. Repeat to activate.

Automatic hutoff

Laser will turn off after 30 seconds

Unit will turn off after 3 minutes

Indice

Altri manuali Johnson Strumento di misura

Johnson

Johnson 40-6624 Manuale utente

Johnson

Johnson 40-6705 Manuale utente

Johnson

Johnson 40-6690 Manuale utente

Johnson

Johnson 1889-0600 Manuale utente

Johnson

Johnson 40-6932 Istruzioni operative e di manutenzione

Johnson

Johnson 40-6625 Manuale utente

Johnson

Johnson LDM85 Manuale utente

Johnson

Johnson 40-6519 Manuale utente

Johnson

Johnson 1888-1900 Manuale utente

Johnson

Johnson 40-6526 Manuale utente

Johnson

Johnson LDM100 Manuale utente

Johnson

Johnson 40-6064 Manuale utente

Johnson

Johnson 40-6535 Manuale utente

Johnson

Johnson 40-6688 Manuale utente

Johnson

Johnson LDM195 Manuale utente

Johnson

Johnson 40-6527 Manuale utente

Johnson

Johnson 40-6526 Manuale utente

Johnson

Johnson 40-6648 Manuale utente

Johnson

Johnson Old Town Sportsman iPilot Manuale utente

Johnson

Johnson 40-6543 Manuale utente

Johnson

Johnson 40-6582 Manuale utente

Johnson

Johnson 40-6676 Manuale utente

Johnson

Johnson 40-6515 Manuale utente

Johnson

Johnson LDM150 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente