Johnson 40-6543 Manuale utente

Self-Leveling Rotary Laser

with GreenBrite®Technology

Model No. 40-6543

Instruction Manual

Congratulations on your choice of this Self-Leveling Rotary Laser

ith GreenBrite® Technology. We suggest you read this instruction

manual thoroughly before using the laser. Save this instruction manual

for future use.

This laser emits one rotating laser beam plus one plumb beam and is

ideal for laying out indoor construction projects.

This is a Class IIIa laser tool and is manufactured to comply with CRF 21,

parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

7365H-All_Man als 10/14/13 2:53 PM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and andling

12. Product Warranty

13. Product Registration

14. Accessories

1. Kit Contents

Description Qty.

Self-Leveling Rotary Laser with GreenBrite®Technology

Ni-M Rechargeable Battery Pack 1

6.4V Battery Adapter 1

Alkaline Battery Compartment (batteries not included) 1

Remote Control with 9V Battery 1

Wall/Ceiling Mount 1

Magnetic Target 1

Tinted Glasses 1

Instruction Manual with Warranty Card 1

ard-Shell Carrying Case 1

2. Features and Functions

• Green beam is 400% more visible than red beam lasers

• Self-leveling in the horizontal plane

• Locking mechanism protects inner pendulum during transportation

• Manual-leveling in the vertical plane with 90º split beam

• Range-scan modes include dot and two adjustable line lengths

• Visual and audible alarms when beyond leveling range

• Dust and rain resistant

7365H-All_Man als 10/14/13 2:53 PM Page 2

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 522-542nm

THIS T L EMITS LASER RADIATI N.

D N T STARE INT BEAM.

AV ID DIRECT EYE EXP SURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

7365H-All_Man als 10/14/13 2:53 PM Page 3

4. Location/Content of Warning Labels

LASER RADIATI N

AV ID DIRECT EYE

EXP SURE.

MAXIMUM OUTPUT POWER

≤5mW @ 522-542nm

CLASS

IIIa LASER PRODUCT.

T IS PRODUCT COMPLIES WIT

T E APPLICABLE REQUIRE-

MENTS OF 21 CFR PARTS

1040.10 & 1040.11

7365H-All_Man als 10/14/13 2:53 PM Page 4

5. Location of Part/Components

Laser output

window

Battery-case

locking screw

Remote control

input receivers

Keypad

Vertical adjustment knob

Battery case

5/8" thread holes

Transportation

locking knob

Calibration

screw plug

andle and

vertical bracket

7365H-All_Man als 10/14/13 2:53 PM Page 5

6. perating Instructions

IMP RTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

Note: Always check to be sure that the on/off switch is in the off

position before removing and replacing batteries.

Usage for Rechargeable & Alkaline Battery Cases

1. Put 4 “C” alkaline batteries into the battery case according to the

polarity indication shown in the battery case.

2. Put the battery case on the laser and tighten the locking screw.

3. If using the rechargeable battery pack, put the battery box on the

laser and tighten the locking screw.

Note:

• When you change the new battery or one which has not been used

for long periods of time, it may not reach full charge until after you

have discharged it fully in use and recharge several times.

• The instrument will still work even if it is being charged with the

adapter.

• Do not charge alkaline batteries.

• Used (discharged) batteries are hazardous waste and should be

disposed of properly.

7365H-All_Man als 10/14/13 2:53 PM Page 6

7. Using the Product

perating Panel

1. Power Key

• Press this key to turn on and off the power.

The locking mechanism must be set in

the unlock position to turn laser on in the horizontal mode.

2. Power LED

• When the LED is lit the unit is connected to the power

• When the LED is off the unit is not receiving power

• When the LED is flashing the battery is low

3. Scanning LED

• When the LED is lit the unit is in rotation mode

• When the LED is flashing the unit is in scan mode

4. Scan mode key

• With the first press of this button, the laser

emits a short laser line.

• With a second press of this button, the laser emits a longer

laser line.

•

With a third press of this button, the laser emits a laser dot.

Rotation speed

and scan keys

Scanning LED

Rotation key

Power Key

Power LED

Scan mode key

7365H-All_Man als 10/14/13 2:53 PM Page 7

5. Rotation key

Press this key, the laser will rotate at its highest speed

6. Rotation speed and scan keys

In rotation mode

• Press the up arrow to increase rotation speed

• Press the down arrow to decrease rotation speed

In scan mode

• Press the up arrow to rotate the scan counterclockwise

• Press the down arrow to rotate the scan clockwise

ut of level alarm

Set the lock knob to the unlocked position. Turn the power on and

the laser will self-level. During the process of self-leveling, if the

laser is tilted to exceed its self-leveling range, it will stop rotating and

the unit will produce a sound alarm.

Transportation lock knob operation

When the lock knob is turned to “ON”, the compensator is unlocked.

When the lock knob is turned to “OFF”, the compensator is locked.

Usage for Horizontal Application

1. Put in the Ni-M battery pack or alkaline batteries, or connect with

6.4V DC power through power jack.

Use on a platform

Connected to a

5/8" x 11 tripod

7365H-All_Man als 10/14/13 2:53 PM Page 8

2. Place the laser on a platform or tripod, connect to the tripod using

the 5/8" thread at the bottom of laser.

Note: If the laser is inclined beyond its self-leveling range, with

transportation locking knob in the on position, the laser will deliver

an audible alarm. Re-position the laser until level.

3. Rotate transportation locking knob counter-clockwise to “ON”,

then turn power on. Press the keys on control panel or remote

control to adjust to your desired working status.

4. After finishing operation or before moving the laser, turn power off

and return locking knob to the “OFF” position.

Note: If transportation locking knob is not turned to the lock position

it will deliver an audible alarm when the unit is returned to its case.

It is important that the locking knob is turned to the locked

position prior to returning the unit to its case.

Note: Remote control operating panel is similiar to laser operating panel.

Power Key

(turns laser power

off only)

Rotation

speed and

scan keys

Scan Key

igh Rotation

Speed Key

7365H-All_Man als 10/14/13 2:53 PM Page 9

Usage for vertical application

IMP RTANT: Keep the transportaion “Locking Knob” in the

“Locked/Off” position.

1. Install batteries/battery pack as previously discussed.

2. Set the laser down on its vertical bracket.

3. Turn on the power by pressing the Power Key. The vertical vial will

now be backlit.

4. Turn the vertical “Adjusting Knob” until the vertical vial bubble is

centered.

5. Select the work state that you need by pressing the buttons on the

operating panel or remote control.

6. Power the laser off when you finish work and keep the

transportation lock in the locked/off position.

Use on a platform

Connected to a

5/8" x 11 tripod

7365H-All_Man als 10/14/13 2:53 PM Page 10

Indice

Lingue:

Altri manuali Johnson Strumento di misura

Johnson

Johnson 40-6705 Manuale utente

Johnson

Johnson JLX 40-6590 Manuale utente

Johnson

Johnson 40-6526 Manuale utente

Johnson

Johnson 40-6535 Manuale utente

Johnson

Johnson 40-6618 Manuale utente

Johnson

Johnson 40-6700 Manuale utente

Johnson

Johnson 1886-0000 Manuale utente

Johnson

Johnson 1888-1100 Manuale utente

Johnson

Johnson 1889-0600 Manuale utente

Johnson

Johnson 40-6526 Manuale utente

Johnson

Johnson 40-6625 Manuale utente

Johnson

Johnson JRT300-RDHV-S Manuale utente

Johnson

Johnson LDM100 Manuale utente

Johnson

Johnson 40-6001 Manuale utente

Johnson

Johnson LEVEL UP 40-6535 Manuale utente

Johnson

Johnson 40-6590 Manuale utente

Johnson

Johnson 40-6690 Manuale utente

Johnson

Johnson 1888-0700 Manuale utente

Johnson

Johnson Old Town Sportsman iPilot Manuale utente

Johnson

Johnson 40-6064 Manuale utente

Johnson

Johnson 40-6932 Istruzioni operative e di manutenzione

Johnson

Johnson LDM150 Manuale utente

Johnson

Johnson 40-6515 Manuale utente

Johnson

Johnson 1456-0000 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente