Kamstrup MULTICAL 801 Manuale utente

MULTICAL® 801

Kmsrup A/S · Indusrivej 28, Silling · DK-8660 Sknderborg · T: +45 89 93 10 00 · info@kmsrup.com · kmsrup.com

Installation and User Guide

2 Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

Energy metering

MULTICAL® 801 functions in the following wy:

The ﬂow sensor registrtes how mny m³ (cubic metres) of district heting

wter re circulting through the heting system.

The temperature sensors, plced in inlet nd outlet ﬂow pipes, register

cooling, i.e. the difference between the input nd output tempertures.

MULTICAL® 801 clcultes the consumed mount of energy bsed on the

district heting wter volume nd cooling.

Readings in the display

When the upper front key is ctivted,  new reding ppers.

The lower front key is used to show historicl redings nd verge

vlues.

4 minutes fter the front key hs been ctivted reding of consumed

energy will utomticlly pper.

MULTICAL® 801

Installation Guide

Kmsrup A/S · Indusrivej 28, Silling · DK-8660 Sknderborg · T: +45 89 93 10 00 · info@kmsrup.com · kmsrup.com

4 Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

MID designations

Rated operating conditions/measuring ranges

Clcultor q: 2 °C…180 °C DΘ: 3K…170K

Temperture sensor pir q: 10 °C…150 °C DΘ: 3K…140K

Flow sensor q: 15 °C…130 °C

Mechanical environment

M1 (ﬁxed instlltion with minimum vibrtion).

M2 (signiﬁcnt or high level of vibrtion nd shock - Flow sensor

type 65-5-XXHX-XXX only).

Electromagnetic environment

E1 nd E2 (domestic/light industry nd industry). Signl cbles from the

meter must be seprted by t lest 25 cm distnce to other instlltions.

Climatic environment

The instlltion shll be mde in non-condensing environments nd in

closed loction (indoor). The mbient temperture must be within 5…55 °C.

Maintenance and repair

The het supplier is llowed to chnge communiction module, bck-up

bttery, clcultor, temperture sensor pir nd ﬂow sensor. Clcultor,

temperture sensor pir nd ﬂow sensor re seprtely veriﬁed nd cn,

therefore, be seprtely exchnched. All repirs require  following re-

veriﬁction in n ccredited lbortory.

MULTICAL® 801, type 67-G/L must be connected to temperture sensors type

Pt500.

MULTICAL® 801, type 67-F/K must be connected to temperture sensors type

Pt100.

MULTICAL® 801 cn be connected to ﬂow sensor type ULTRAFLOW®,

electronic pick-up unit, ﬂow sensor with reed switch output or  ﬂow sensor

with 24 V ctive pulse output.

Irrespective of ﬂow sensor type, ”pulses/litres” must be identicl in ﬂow

sensor nd clcultor.

Battery for replacement

Kmstrup type 66-99-619.

5Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

Contents

1 General information 6

2 Mounting of temperature

sensors 7

2.1 Pocket sensor pir 7

2.2 Short direct temperture

sensor set 8

3 Mounting of ﬂow sensor 8

3.1 Mounting of couplings nd

short direct sensor mounted in

ULTRAFLOW® ﬂow prt 9

3.2 Mounting of ULTRAFLOW® ≤

DN125 11

3.3 Mounting of ULTRAFLOW® 54 ≥

DN150 11

4 Mounting of calculator 12

4.1 MULTICAL® 801 front

dimensions 12

4.2 MULTICAL® 801 instlltion

dimensions 12

5 Power supply 13

5.1 Bckup bttery 13

6 Operational check 13

7 Electrical connection 14

7.1 Exmples of connections 15

8 Data modules 17

8.1 GSM/GPRS module (GSM6H),

type 67-0Z 17

8.2 3G GSM/GPRS module

(GSM8H), type 67-0U 17

8.3 Ethernet/IP module (IP201),

type 67-0T 17

8.4 M-Bus, type 67-00-20/

67-00-27/67-00-29/

67-0V/67-0P/67-0Q 18

8.5 Rdio + pulse inputs,

type 67-00-21/67-0W 18

8.6 Prog. dt logger + RTC +

4…20 mA inputs + pulse

inputs, type 67-00-22 19

8.7 Lon Works,

type 67-00-24/67-0Y 19

8.8 Wireless M-Bus,

type 67-00-30/

67-00-31/67-00-35/

67-00-38 19

8.9 ZigBee® + pulse inputs,

type 67-00-60 19

8.10 Metsys N2 + pulse inputs,

type 67-00-62 20

8.11 SIOX module (Auto detect

Bud rte),

type 67-00-64/67-0M 20

8.12 BACnet® + pulse inputs,

type 67-00-66 20

8.13 Modbus RS485 RTU Slve

Module + pulse inputs,

type 67-00-67 21

8.14 High Power Rdio Router

+ 2 pulse inputs (VA, VB),

type 67-00-84 21

8.15 Module overview 22

8.16 Insertion of modules 23

9 Information codes ”INFO” 24

10 Terminal Overview 25

6 Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

1 General information

Please read this guide before installing the energy meter.

If the meter is installed incorrectly, Kamstrup’s warranty obligations

will no longer apply.

Plese note tht the following instlltion conditions must be obeyed:

- Pressure stge ULTRAFLOW®: PN16/PN25/PN40, see mrking. Mrking

of ﬂow prt does not cover included

ccessories.

- Pressure stge Kmstrup

sensor set type DS: PN16

- Pressure stge Kmstrup

pocket sensors type PL: PN25/PN40 - depending on type

If the medium temperture exceeds 90 °C we recommend using ﬂnge

meters.

Plese mke sure tht MULTICAL® 801 is connected to correct voltge, either

230 VAC or 24 VAC. See the mrking t terminls 27 nd 28 t the bottom

left.

MULTICAL® 801 must be seled with sel nd wire or  seling lbel fter

mounting.

7Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

2 Mounting of temperature sensors

The temperture sensors used for mesuring forwrd nd return

tempertures respectively, constitute  mtched sensor pir, which must

never be seprted. Temperture sensors re usully mounted in the

clcultor from the fctory. According to EN 1434/OIML R75 the cble length

must not be chnged. Should replcement be necessry, both sensors must

be replced.

The sensor mrked with  red sign is to be instlled in the ﬂow pipe. The

other sensor, mrked with  blue sign, is to be instlled in the return pipe. For

mounting in the clcultor, see the prgrph ”Electricl connection”.

Note: The sensor cbles must neither be exposed to jerking nor pulling.

Plese be wre of this when binding the cbles, nd be creful not to

pull the binders unnecessrily tight s this my dmge the cbles.

Plese lso note tht temperture sensors must be mounted from

below in cooling or het/cooling instlltions.

2.1 Direct sensors

The short, direct sensors up to DN25

cn be mounted in specil bll

vlves with built-in M 10 socket for

the short direct sensor. They cn

lso be mounted in instlltions

with stndrd ngle tee-pipes.

Kmstrup supply R½ nd R¾ brss

nipples, which ﬁt our short, direct

sensor. Mke sure tht the tip of

the temperture sensor reches

t lest the center of the ﬂow pipe.

The short direct sensor cn lso be

direct mounted in ll Kmstrup ﬂow

sensors with G¾B, G1B, G5/4B nd

G2 thred on the meter cse. Fsten

the sensors’ brss unions lightly

(pprox. 4 Nm) using  12 mm fce

wrench nd sel the sensors with

sel nd locking wire.

8 Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

2.2 Pocket sensors

The sensor pockets cn be

mounted in e.g.  welding sleeve

or in  45° lterl Y-piece. The tip

of the sensor pocket must t lest

rech the center of the ﬂow pipe.

Push the temperture sensors

s deep s possible into the

pockets. If  short response time is

required, “nonhrdening” thermlly

conductive pste cn be used. Push

the plstic sleeve on the sensor

cble into the sensor pocket nd

secure the cble by mens of the

enclosed M4 seling screw. Fsten

the screw with your ﬁngers only.

Sel the pockets using sel nd

locking wire.

3 Mounting of ﬂow sensor

Prior to instlltion of the ﬂow sensor, the system should be ﬂushed nd

protection plugs/plstic diphrgms removed from the ﬂow sensor.

Correct ﬂow sensor position (inlet or outlet pipe) ppers from the front lbel

of the MULTICAL® 801. The ﬂow direction is indicted by n rrow on the ﬂow

sensor.

9Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

3.1 Mounting of couplings and short direct sensor mounted in

ULTRAFLOW® ﬂow part

The short direct sensor from

Kmstrup cn only be mounted

in PN16 instlltions. The blind plug

mounted in the ULTRAFLOW® cn be

used in connection with both PN16

nd PN25.

The ﬂow meter cn be used in both

PN16 nd PN25 nd cn be supplied

mrked either PN16 or PN25 s

desired.

Fittings, if supplied, cn only

be used for PN16. For PN25

instlltions, ﬁttings suitble for

PN25 should be used.

In connection with G¾x110 mm and

G1x110 mm it shall be checked that

the thread run-out is sufﬁcient. See

the ﬁgures to the right.

Tightening

pp. 4 Nm

Gsket

10 mm

Type 65-5-XXAX-XXX

Gsket

Tightening

pp. 4 Nm

12 mm

Type 65-5-XXHX-XXX

Couplings nd gskets re mounted s shown in the bove ﬁgures.

Stright inlet: ULTRAFLOW® requires neither stright inlet nor stright outlet

to meet the Mesuring Instruments Directive (MID) 2004/22/ EC nd EN

1434:2007. A stright inlet section will only be necessry in cse of hevy

ﬂow disturbnces before the meter. We recommend to follow the guidelines

of CEN CR 13582.

10 Kamstrup A/S • 5512603_C1_GB_03.2016

MULTICAL® 801

A Recommended ﬂow sensor

position.

B Recommended ﬂow sensor

position.

C Uncceptble position due to

risk of ir build-up.

D Acceptble in closed systems.

Uncceptble position in open

systems due to risk of ir build-

up in the system.

E A ﬂow sensor ought not to be

plced immeditely fter  vlve,

with the exception of block

vlves (bll vlve type) which

must be fully open when not

used for blocking.

F A ﬂow sensor should not be

plced t the suction side of 

pump.

G A ﬂow sensor ought not to be

plced fter  double bend in

two levels.

In order to prevent cvittion the bck pressure (the pressure t the ﬂow

sensor outlet) t ULTRAFLOW® must be min. 1.5 br t qpnd min. 2.5 br t

qs. This pplies to tempertures up to pprox. 80 °C. ULTRAFLOW® must not

be exposed to lower pressure thn the mbient pressure (vcuum).

Altri manuali per MULTICAL 801

Indice

Altri manuali Kamstrup Strumento di misura

Kamstrup

Kamstrup MULTICAL 601 Manuale utente

Kamstrup

Kamstrup MULTICAL 402 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 302 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 62 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 302 Manuale utente

Kamstrup

Kamstrup flowIQ 2102 Istruzioni operative e di manutenzione

Kamstrup

Kamstrup ULTRAFLOW 54 Series Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 403 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 61 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 801 Manuale elenco delle parti

Kamstrup

Kamstrup ULTRAFLOW 54 DN150-300 Manuale elenco delle parti

Kamstrup

Kamstrup flowIQ 3100 Istruzioni per l'uso e l'installazione

Kamstrup

Kamstrup MULTICAL 602 Manuale utente

Kamstrup

Kamstrup flowIQ 4200 Manuale utente

Kamstrup

Kamstrup ULTRAFLOW 54 Manuale utente

Kamstrup

Kamstrup ULTRAFLOW 54 DN15-125 Manuale elenco delle parti

Kamstrup

Kamstrup flowIQ 3100 Series Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 602 Manuale utente

Kamstrup

Kamstrup MULTICAL 6M2 Manuale utente

Kamstrup

Kamstrup MULTICAL 62 Manuale utente

Kamstrup

Kamstrup OMNIPOWER Manuale utente

Kamstrup

Kamstrup MAXICAL III Manuale utente

Kamstrup

Kamstrup flowIQ 3100 Manuale elenco delle parti

Kamstrup

Kamstrup MULTICAL 603 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente