KEENCUT EXCALIBUR 3S Manuale utente
EXCALIBUR 3S Manual
Single language versions and parts diagrams can be down loaded from www.keencut.co.uk
Thank you for choosing the Keencut Excalibur 3S. Every
eort has been made to bring you a precision engineered
product with the promise of many years of valuable
service. In order to obtain maximum benet from your
machine please read these instructions carefully. For advice
and assistance or replacement parts please contact your
distributor or Keencut.
PLEASE NOTE THIS IS A TEMPORARY MANUAL
2.1 Unpacking your machine
NOTE: * When lifting the main body from the box, DO NOT lift using the black handles on the
cutters.
1. Main body *
2. Squaring arm
3. Left & right hand support arms
4. Vertical scale & spare sightline strip
5. Wall mounting bracket
6. Hexagon wrenches
2.0, 3.0, 5.0, 6.0 mm
7. Short support arm screws
8. Long support arm xing screws
9. Leg xing screws & washers
10. Left hand production stop
11. Right hand production stop
12. Squaring adjuster block & xing screw
13. Spare blades
❶
❸
❷
❹
❺
❻
❼
❽❾
❿⓬
⓫⓭
Altri manuali per EXCALIBUR 3S
3
Altri manuali KEENCUT Utensili
