KENT 86355 Manuale utente

MINI STAPLER KIT

Features & Benefits

•Light and ergonomic (only 200 grams!)

•Its very small size allows to repair hard to reach areas

•Long life rechargeable batteries

•2 power options: low (12.75W) and high (17W), depending on the thickness of the plastic

•250 staples at 17W at fill battery load

•3 possible angles (0°, 45°or 90°), for welding in any position

•Integrated LED light

•Assortment of 160 staples in the kit

Cordless and compact hot stapling system to repair any plastic

parts in minutes.

Part number: 86355-00 (UK: 86355-01)

Content:Cordless Mini Stapler and charger

Assortment of 160 staples

Leaflet with instructions for use

DS678 Hints & Tips

To reach a maximum lifetime of the battery-pack of the KENT Mini

Stapler, we recommend always storing the power unit fully charged.

UPDATED: 20.10.2015

Instructions for use

1. Choose the suitable shape of staple and place it into the electrodes (see list of staples on next page).

2. Insert the staple into the electrodes, in the angle that most suits the application (0°, 45°or 90°).

3. Once the staple is inserted into the electrode, position the staple against the area to be repaired.

4. Push the red or blue button and exert a slight pressure in order to let the staple slowly penetrate into the

plastic part. The colour of the button determines the power to use according to the thickness and the type of

plastic material:

•Blue (low power, 12.75W): plastic with 1.5 to 2 mm thickness

•Red (high power, 17W): hard plastics with thickness over 2 mm

5. Release the button and wait 3 seconds before withdrawing the KENT Mini Stapler, in order to allow the

melted plastic to harden.

6. Repeat the operation in all necessary areas until the repair is complete.

7. Cut off the excess parts of the staples with cutting pliers (protect your eyes against flying parts).

Precautions and safety

The staple inserted into the electrode during the welding phase reaches a temperature of about 500°C.

Be very careful as improper handling can cause serious burns, sparks or fire.

•Use safety goggles and heat resistant gloves when working.

•Before inserting the staple be sure the electrodes are cold.

•Do not touch the staple clip during the heating phase while it is positioned on the electrodes.

•Do not use in presence of flammable products.

•Do not use with wet hands.

•Do not store or use in humid environments.

•Do not store in direct sunlight.

•This product is designed for the repair of plastic material only.

•The KENT Mini Plastic Stapler should be used only with the original KENT staples.

MINI STAPLER KIT

DS678

Before use

Charge the unit completely before the first use.

Always charge the batteries completely (approx. 5 hours).

1. Plug in the battery charger to the electricity supply system.

2. Connect the battery charger to the side connector of the KENT Mini Stapler.

3. During charging process, the LED on the front side will be flashing (1 flash per second) .

4. The battery-pack is fully charged when LED stops flashing.

5. The battery-pack is empty when during the working process the LED starts to flash.

NB: Work can be continued by connecting the battery charger to the KENT Mini Stapler.

Hint: to reach the optimal lifetime of the battery-pack, the unit should be charged only when the batteries

are discharged completely (LED is flashing during work process).

•The charging progress is controlled by temperature of the battery-pack by a micro chip. After a longer use

of the KENT Mini Stapler, the batteries might reach an elevated temperature. The charging process will be

delayed until the batteries have cooled to the standard temperature.

•In case the unit has not been in use for a longer period and the batteries are completely empty, it is

necessary to plug in the unit for mininum 15 min. in order to be able to work with the plugged in charging

cable.

Small repairs Large repairs

0.6 mm, 100 units (86037-00)

0.8 mm, 100 units (86038-00)

0.6 mm, 100 units (86039-00)

0.8 mm, 100 units (86040-00)

0.8 mm, 100 units (86041-00)

0.8 mm, 100 units (86280-00)

0.8 mm, 100 units (86279-00)

0.8 mm, 100 units (86358-00)

The staples are available separately

Example of application for the large W-staple 86358-00:

Technical Information

Packaging:Plastic case and foam inlay

Voltage: 2.4V

Power: 12.75W/17W

Battery pack:2x 1.2V / 4.5 A / NiMh

Power supply:12VDC / 0.5 A

Charging time: max. 5h

Working time: ca.300 staples at 17W

and fully loaded

Weight of the Plastic Stapler: 220 g

Material of the staples:Stainless steel 302

Custom Tariff Code:85151100

Spare parts available on request

MINI STAPLER KIT

DS678

In order to provide you with the most appropriate Personal Protective Equipment when using our products, KENT advises that you follow the

guidelines on the packaging of the product before use. The guidelines are there for your protection and KENT provides a range of Personal

Protection Equipment such as clothing, eye glasses, goggles, face shields and breathing apparatus, complying with the latest European

legislation. If you require further advice then please phone our freephone number and we will be pleased to help you. Telephone: 0800 136925

Process Centre: KENT UK, Pitreavie Crescent, Pitreavie Business Park, Dunfermline

Fife KY11 8UQ Tel : Freephone 0800 136925 or 01383 737393 between 08:30-17:30

Monday-Thursday, 09:00-15:00 on Fridays’. For out of hours queries please Fax us on

01383 735829 or Email: KENTsales.[email protected]

Terms and Conditions

No part of this publication may be reproduced

transmitted or stored, electronically, mechanically or

photocopied without the prior permission of KENT UK.

This data sheet and its contents (the "Information")

belong to KENT UK or are licensed to it. No licence

is granted for the use of it other than for information

purposes in connection with the products to which

it relates. No licence of any intellectual property

rights is granted.

The Information is subject to change without notice

and replaces all data sheets previously supplied.

The Information supplied is believed to be accurate

but the business assumes no responsibility for its

accuracy or completeness, any error from or omission

in it nor for any use made of it. Users of this data sheet

should check for themselves the Information and the

suitability of the products for their purpose and not

make any assumptions based on information included

or omitted. Liability for loss or damage resulting from

any reliance on the Information or use of it (including

liability resulting from negligence or where the business

was aware of the possibility of such loss or damage

arising) is excluded. This will not operate to limit or

restrict the business liability for death or personal injury

resulting from its negligence.

Registered Office: Berner UK Limited

Amber House, Showground Road

Bridgwater, Somerset,

United Kingdom TA6 6AJ

Health & Safety Information

The product is not subject to identification regulations under EC Directives and the Ordinance on

Hazardous Materials.

Mini Stapler is in compliance with the directives 2004/108/CE -2006/42/CE -2006/95/CE and the

following standards apply: EN50063 -EN50199

Content of the kit

1x Mini Stapler

1x 12V charger

1x Assortment box (empty: 86282-00)

1x leaflet with instructions for use

20x W-staples 0,6mm (per 100: 86037-00)

20x W-staples 0,8mm (per 100: 86038-00)

20x S-staples 0,6mm (per 100: 86039-00)

20x S-staples 0,8mm (per 100: 86040-00)

20x V-staples 0,8mm (per 100: 86041-00)

20x double M-staples 0,8mm (per 100: 86279-00)

20x double V-staples 90°0,8mm (per 100: 86280-00)

20x large W-staples 0,8mm (per 100: 86358-00)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali KENT Utensili

KENT

KENT Nordco KF3BM Manuale utente

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare