Linksys PAP2 Manuale utente

Fratelecom Ltd.

Quick Start Guide

Setting up your LINKSYS PAP2 Phone Adaptor for Use with

Fratelecom’s ITSP Service

Fratelecom ITSP Service provides a flexible and cost-effective alternative for making long-distance and

international phone calls. If you are a Linksys PAP2 user, you may now enjoy our service by properly

configuring some of the settings on your phone.

A. Before You Start

Before you start, please make sure you have the followings provided by Fratelecom. If not, please

contact [email protected]

•12-digit ITSP account

•6-digit password

Please follow the steps below to configure your Linksys PAP2. For other settings, please refer to your

Linksys operation manual.

B. Configurations from Web Browser

1. Select a computer which is able to connect to your Linksys PAP2. Open the web browser and on

the address bar type your Linksys PAP2 web administration address such as

“http://192.168.2.159/admin/” where 192.168.2.159 is the IP address assigned to Linksys PAP2.

Note: When accessing, “ /admin/ ” must be followed by the IP address in order to log in Linksys’

VoIP Web Server successfully.

2. On the Main Menu, click Line 1 to access to the setup page as follows.

3. On the Line 1 Setup Page, set the following items.

SIP Port 5060 User ID Same as your auth ID

Proxy 203.66.6.210 Use Auth ID Yes

Password 6-digit password Preferred Codec G723

Auth ID 12-digit ITSP account

1

4. After you complete the settings above, click “Save Settings” to save and then reboot your PAP2

device.

Note: LINKSYS PAP2 device provides two RJ11 FXS ports (Line 1, 2). If you need to use Line 2

port, please follow the same steps above to configure the settings of Line 2.

C. Make Device to Phone Calls

You can make long-distance or international calls to any country covered by Fratelecom’s ITSP service.

Make a call to U.S.:

[U.S. country code]+[U.S. area code]+[U.S. telephone number]

1 909 5551234

Make a call to Taiwan:

[Taiwan country code]+ [Taiwan area code]+[Taiwan telephone number]

886 2 88881234

D. Check Your ITSP Account Balance

You may check your account balance right from your device. Fratelecom ITSP Service provides an IVR

(Interactive Voice Response) system to prompt you the real-time balance. Please follow the steps below

to check your balance.

1. Make sure your Linksys PAP2 is connected to the Internet.

2. Pick up the telephone handset connected to your Linksys PAP2.

3. Press “ *88# “ from the dial pad. You will be prompted the balance of your ITSP account.

If your account balance is zero, please contact [email protected]

2

3

E. Check Your Account Information and Call Records

You may also check your account details from Fratelecom website http://www.fratelecom.info/ after

you login "My Account." If you are using ITSP account, please input correct ITSP account number and

security code to login. If you are using 6-digit device ID account, please input device ID number,

4-digit password and security code to login. Please contact us if you don’t know your password of

6-digit device ID. After you login successfully, you can check Calling Detail Record, Transaction

Record, balance status, calling rates and change password.

Altri manuali per PAP2

14

Indice

Altri manuali Linksys Scheda di rete

Linksys

Linksys Compact USB 2.0 Manuale utente

Linksys

Linksys USB100TX - EtherFast 10/100 USB Network... Manuale utente

Linksys

Linksys WGA600N - Wireless-N Gaming Adapter Bridge Manuale utente

Linksys

Linksys PLE300 Manuale utente

Linksys

Linksys WUSBF54G Manuale operativo

Linksys

Linksys WUSB300N Manuale utente

Linksys

Linksys WUSB300N Manuale operativo

Linksys

Linksys HP200 Manuale utente

Linksys

Linksys WUSB54GSC Manuale utente

Linksys

Linksys EC2T Istruzioni operative originali

Linksys

Linksys WDT11 Manuale utente

Linksys

Linksys WUSB54GP Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale utente

Linksys

Linksys EG1064 Manuale utente

Linksys

Linksys EG1032 Istruzioni operative originali

Linksys

Linksys WUSB54GSC Istruzioni operative originali

Linksys

Linksys EG1032 Manuale utente

Linksys

Linksys USB200HA Manuale utente

Linksys

Linksys EG1064 Istruzioni operative originali

Linksys

Linksys Instant Broadband Series Manuale utente

Linksys

Linksys EtherFast LNE100TX ver. 5 Manuale utente

Linksys

Linksys EG1032 Manuale utente

Linksys

Linksys USB200M Manuale utente

Linksys

Linksys WPC11 Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente

TRENDnet

TRENDnet TEG-PCITXR Manuale utente