Linn INDEX Manuale utente

LINN INDEX

OWNERS MANUAL

NTRODUCTION Thank you for choosing our Linn INDEX LS120 Loudspeakers, the result of

extensive design and development work. The INDEX set new standards of performance in

loudspeakers of this type.

Remember, no loudspeaker is capable of improving the quality of the input signal, so the INDEX should

be used with good quality ancillary equipment.

INSTALLATION When removing the loudspeakers from their boxes, lift the cabinets out by their sides.

This will avoid possible damage to the grilles and their drive units.

Please retain all packing for possible future transportation.

All loudspeakers perform best when rigidly mounted. To achieve this, Linn have designed a stand for the

INDEX, which includes stabilising floor spikes. These stands give optimum sound quality and ensure that

the drive units are correctly positioned for the listener.

Connection of the loudspeakers to the amplifier should be made with a good quality cable. Linn K20

loudspeaker cable is ideal. The leads should be terminated with the connectors supplied to ensure

optimum performance. The use of other connectors will degrade the sound quality of your system.

The cable is marked with the Linn symbol to indicate directionality. The bare wires shown should he

connected to the amplifier and the end marked with the circular logo should be connected to the

loudspeakers.

< LOUDSPEAKERS AMPLIFIER >

Take care to ensure that the wiring is correct. The red socket is positive and the black is negative. The

positive wire (red connector) is identified by a rib along the side of the cable.

INDEX speakers are designed to perform best when placed close to a wall. Ideally the rear of the

loudspeaker should be between 4" and 17" (10 and 30cm) from the wall and at least 18" (45cm) from any

corner.

INDEX can also benefit from being angled inward slightly by 5 to 10 degrees.

STANDS

CONNECTIONS

POSITIONING

These are general guidelines and a little experimentation with positioning will optimise results for a

particular room. Your dealer will be pleased to do this when he installs your equipment.

The INDEX grille is special because it mounts directly onto the front facia of the speaker. This avoids the

problems of diffraction produced by conventional grille frames.

Bi-wiring improves the performance of a loudspeaker. By using a separate cable for the bass and treble

section, some interaction between the bass and treble section is removed. The extra cost of an

additional pair of loudspeaker cables is more than justified by the improvement in sound quality gained.

Because most amplifiers have only one speaker output you will have to double up the connection to the

speaker plug – your dealer will be pleased to supply the necessary leads for you, and to set up your

loudspeakers.

To convert the INDEX to single wired mode, use the key provided to unscrew the negative (black)

socket caps and fit the link provided. Replace and tighten the caps and then repeat for the positive (red)

sockets, and firmly re-tighten.

GRILLE

BI-WIRING

Linn loudspeakers require no internal maintenance and on no account should you try to remove any of

the drive units which are carefully tightened and sealed at the factory.

For servicing, always return the speakers as a pair to your supplier, using the original packing in order to

reduce she risk of damage in transit. If you have lost the packaging, your supplier can provide a

replacement set.

Ensure your equipment is insured by you during transit, repair and return shipping.

These units are guaranteed under the conditions that apply in the country of purchase. To help us,

please return your guarantee card.

In addition to any statutory rights you have as a customer, we undertake to replace any parts that have

failed due to faulty manufacture if you register your purchase with us.

Please keep a copy of your sales receipt as this will establish the purchase date of the loudspeakers

and refer all enquiries through authorised dealers only.

LINN PRODUCTS LIMITED, FLOORS ROAD, WATERFOOT, EAGLESHAM,

GLASGOW G76 OEP, SCOTLAND, TELEPHONE: ++44 (0)141 307 7777

FACSIMILE: ++44 (0)141 644 4262.

MAINTENANCE/SERVICE

GUARANTEE

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente