Major tech MT173 Manuale utente
Video Borescope User Manual
Contents
1.Warning.................................................................................
2.Introduction...........................................................................
3.Function Description..............................................................
4.Specification...........................................................................
5.Panel Name and Function Description....................................
6.Operating Instructions...........................................................
7.Notes.....................................................................................
3
Video Borescope User Manual
Page
4
5
5
6
7
9
14
1.Warning
Safety tips
Before using the instrument, read all safety information and
specification of the Video borescope carefully.
1-1.Application Of Places
•Detect the inside parts of the machinery which are unable to be
checked as to whether the machinery is working normally (cars,
heavy machinery, aircraft).
•Put the gooseneck with camera into the underwater to check the
objects in the water (Drainage works).
•Used in some special monitor places (such as rearview mirror of
the car).
•Such as used for wild adventure.
1-2.Maintenance And Cleaning
•Repair or maintenance should be carried out by professionals, not
only to carry out manual.
•The camera after using it, don’t use detergents to clean this product.
Dangerous Voltage
Asks the user to see to has dangerous voltage when the appendix
careful, because this appendix possibly can cause the serious electric
shock accident.
Safety Symbols
Double insulation, accord with CE safety standards.
•
•
4
Video Borescope User Manual
2.Introduction
The borescope video instrument using super high-definition 3.0 "TFT
LCD, Resolution: 960(W) X240(H), application of H. 264 video codec
technology makes images clear picture quality, delicate, and equipped
with a meter long curved comfortable waterproof goose-shaped
tube Simple, convenient, that can not be touched with the naked
eye can not watch Object Detection.
3.Function Description
•Support real-time live view
•Support TV-OUT
•TV peripherals to support operations in other
•Highlighted with LED, to support the operation of the dark places
•Built-in 2000mAh lithium battery, support USB charging
•Standby function to support the charge
•Support rotating the image 180° from top to bottom
•Support the OSD regulation of contrast, brightness, color temperature, etc.
•Support English and german
5
Video Borescope User Manual
4.Specification
•Camera
Sensor size
Sensor pixel
Maximum resolution
Maximum frame rate(FPS)
Color median
Focusing method
Gooseneck length
Camera diameter
•TFT-LCD
Color TFT-LCD size
Display resolution
Active area
•Light Source
Highlight 4 LED
Adjustable light intensity level
•Power
Battery
Working Current
Standby current
•Temperature
Operating Temperature
Storage temperature
Relative Humidity
•Product attributes
Size
Weight
6
Video Borescope User Manual
1/4 inch CMOS
300,000
640 x 480
30FPS/S
24 Bit
Fixed focus15cm ~ 25cm(5.9”~9.8")
1m(39")
17mm(0.66")
3.0 inch
960(W)X 240(H)
60mm X 45mm
6 Level
Lithium batteries3.7V/2000mAh
MAX 480mA
MAX 5mA
0°C----50°C
-20°C----60°C
596.2g
5% ----85%
100*95*235mm
5.Panel Name And Function Description
7
Video Borescope User Manual
8
9
7
2
3
6
4
5
10
8
Video Borescope User Manual
1.Goose-shaped
2.Light source level
3.Decrease button
4.Addition button
5.Power button
6.Mode button/confirmed button
7.TV Output"
8.USB Charge port
9.System reset
10.Lithium batteries
11.Camera
12.Camera connectors
1
11
12
6.Operating Instructions
Systems Open And Closed
•Power switch: press the power key to switch on, Video borescope systems
to open, once again press the power switch to switch off the Video
borescope system.
•USB charging start:The system will automotically open to charge
in off position. TFT-LCD display mode prompt menu "is charging
standby?", press "-","+" button and moving the cursor, press "MODE"
button for confirmation.
A.Select standby charge, camera, FTF-LCD, video processor source
was cloded, system enter in lowest power consumption.
B.Choose not to charge the standby, system enters normal operating
mode.
C.Normal operating mode, when the battery voltage is greater than
4.0V, the top right corner of TFT-LCD displays " " battery symbol,
that indicates the voltage is full. When the battery voltage less than
4.0V the top right corner of TFT-LCD display such as " , , , ,"
that indicates the battery is charging. When USB charging starts,
it has no effect to press the power switch. Press "MODE" button on
the panel for a long time to enter standby charge of system.
•Image rotation and image setting
•Image Rotation: Video borescope systems in open, short press8 the
panel "MODE" button to rotate the image 90°
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9
Video Borescope User Manual
Battery symbol
10
Video Borescope User Manual
Field of view
•Image setting: switch on Video borescope system, press "MODE"
button for 2 seconds, then the system enters in image setting
mode, can regulate the brightness, contrast, definition, color
temperature, language and etc., operation procedure:
•
•
•
