2
■Handling Instructions■
⚫Do notburdenthemachine.（extremely thickorhard）
⚫Do notusewhereitgetswet.Avoid using wethands.
⚫Becarefulnotto touchthe cuttingedge whenreplacing blade.
⚫Keepyourfingers awayfrom the blade whileoperating.
⚫Notto giveexcessiveshocksuch asfalls.
⚫Do notoperate with the presserfootincontact withtherollerorcutter.
⚫Do not operate the roller in contact with the blade.(It may cause the blade to chip or the
sharpness todeterioratequickly.)
⚫Do not stop the processed product and keep moving the skiving Machine.（It will cause the
sharpness todeterioratequickly）
⚫Neverruncontinuously formore than15minutes.(interval45 minutes)
⚫Besure tokeep the cardboard boxesthatthemachine wasin.
➢（Itis usedwhenshipping toourcompanyif thereisaproblem.）
■Safety device■
⚫Spindlemotor・Feedmotor
✓There is a safety device that automatically shuts off the machine when a certain load is
applied.
✓Once the safety device has been activated, turn off the main power and remove the one
withtools that caused the overload.
✓Atthis time,becarefulnottotouchthebladewithyour hands.
✓If itcan beconfirmedthatithasbeenremoved,turnonthemainpoweragainandcheckthat
theindicatorlamp is lightingreenbefore restartingoperation.
⚫Maincircuit
✓If thecircuitisshorted,the fusebuiltintothe mainunit willblow.
✓If thefuse isbroken, replaceitwithanewone. Referto8page“ Fuse Replacement”.
■Makesure tocheckthe followingitemsbeforework■
⚫Checkifeach part hasnoloosescrews.
⚫Checkthat thebladeandpresserfootare firmlyfixed.
⚫Check if the presser foot is not in contact with the bladeor roller and the roller is not in contact
with the blade.
⚫Adjustmentthethicknessintrialandthenworkonit.
