Nvent FLEXCOND50 Manuale utente

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

L1

①

②

≥10mm

℄

7

E1

S

E1

S

L1

③

≥30m

m

TQ = 6Nm

7

Lr

④

CLIC

10

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

⑤

⑥

TQ = 6Nm

1

0

⑦

⑧

CLIC

TQ = 6Nm

10

⑨

CLIC

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

25mm

x2 Min

Option 1

24mm

D

6

D

!

7

1: ②-④

2: ⑥-⑨

1: ②-④

2: ⑥-⑨

6

10

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

①

②

③

Option 2

24mm

TQ = 6Nm

CABSBRKTE

CABSBRKTT

!

L2 = L1 + 25mm

!

E2 = E1 + 12.5mm

CLIC

10

TQ = 6Nm

7

2: ⑥-⑨

1: ②

10

CLIC

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

①

②

1: ②

!

L2 = L1 + 25mm

!

E2 = E1 + 12.5mm

1

0

TQ = 6Nm

2: ④, ⑥-⑨

8,9

10

1

2

3

4

5

!

10

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

INSTRUCTION SHEET

NVENT ERIFLEX FLEXBUS SUPPORTS AND BRACING SYSTEM

FLEXCOND50 / FLEXCOND100

WARNING:

1. nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent

customer service representative.

2. nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings.

3. All instructions must be completely followed to ensure proper and safe installation and performance.

4. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death,

and void your warranty.

SAFETY INSTRUCTIONS: All governing codes and regulations and those required by the job site must be observed. Always use appropriate safety equipment such as eye protection, hard hat, and

gloves as appropriate to the application.

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the

property of their respective owners. nVent reserves the right to change specifications without prior notice.

TECHNICAL SUPPORT:

CONFIGURATION

FLEXCOND50

FLEXCOND100

L1

# L1

E1

S

Lr

# Lr

D

L1

# L1

E1

S

Lr

# Lr

D

3P (I)

287,5

3

12,5

87,5

160

4

262,5

325

3

12,5

100

195

4

300

112,5

7

12,5

87,5

435

2

87,5

162,5

7

12,5

137,5

195

2

137,5

287,5

3

12,5

87,5

160

4

262,5

437,5

3

12,5

137,5

300

4

412,5

3P (II)

550

3

12,5

87,5

160

7

525

625

3

12,5

100

195

7

600

287,5

5

12,5

87,5

255

4

262,5

325

5

12,5

100

360

4

300

200

7

12,5

87,5

435

3

175

300

7

12,5

137,5

435

3

275

287,5

5

12,5

87,5

300

4

262,5

437,5

5

12,5

137,5

300

4

412,5

3P + N (I)

375

3

12,5

87,5

160

5

350

425

3

12,5

100

195

5

400

200

5

12,5

87,5

255

3

175

225

5

12,5

100

360

3

200

5

12,5

87,5

300

3

175

300

5

12,5

137,5

300

3

275

112,5

9

12,5

87,5

570

2

87,5

162,5

9

12,5

137,5

570

2

137,5

375

3

12,5

87,5

160

3

350

575

3

12,5

137,5

195

3

550

3P + N (II)

725

3

12,5

87,5

160

9

700

825

3

12,5

100

195

9

800

375

5

12,5

87,5

255

5

350

425

5

12,5

100

360

5

400

200

9

12,5

87,5

570

3

175

300

9

12,5

137,5

570

3

275

375

5

12,5

87,5

300

5

350

575

5

12,5

137,5

300

5

550

nvent FLEXCOND50 Manuale utente

Manuali Utensili popolari di altre marche