Oneida Air Systems AHR000025 Manuale utente
oneida-air.com1-800-732-4065
Rev: A 20230314LL Doc. #ZBI000054
Hose Reel
#AHR000025
INSTRUCTION SHEET
Once you complete installation of your Hose Reel, please either
scan the QR code or visit oneidaair.wufoo.com/forms/hose-tester
to provide your honest feedback to help us make a great product!
2Oneida Air Systems
System Contents
ID Part number Part description Qty
A* --------------- Body Assembly 1
A1* AAC810025 Core 2
A2* AHM000025 Wall Mount Plate 2
A3* AHS000025 Handle Side Assembly 2
A4* AHS000251 Outlet & Brake Side Assembly 2
B AHH500513 Handle 1
B1 --------------- Screw 1
B2 --------------- Spring 1
CDFH000025 2.5" Outlet Coupler 1
DAFS000011 8-32 x 3/8”Button Head Screw 3
ID Part number Part description Qty
E ACT000238 Brake 1
E1 -------------- 1/4"-20 Hex Nut 2
FAFW000008 2" Nylon Spacer 1
GAFS000010 1/4"-20 X 3" Button Head Screw 1
DAFS000011 8-32 x 3/8" Button Head Screw 4
H ACL000003 3" Loop Clamp 1
IAFS000004 #10 x 1/2'' Self-Drilling Screw 1
JVSHRFB250 2.50" X 25' Hose 1
KACB360000 Turn Key Hose Clamp 1
E
C D
D
F
H I
B
J
G
K
A
E1
B2B1
A3
A4
A1
A2
If you cannot find an item on the list examine the packaging materials very
carefully. *Certain components are pre-installed for ease of installation.
Assembly Instructions
3oneida-air.com
You will need the following tools:
WALL MOUNTING BRACKET
Stud Finder Light Adhesive Tape Allen Wrench Clamp
Tack / Center Punch / Nail Tape Measure / Ruler Flathead Screwdriver Power Drill
Wall Mounting Fasteners * Level Tool Pencil / Marker Drill Bit (for your wall fastener)
*You will need to supply your own wall mounting hardware. Use appropriate fasteners for the wall type you are
installing your system onto (e.g. lag bolts, drywall anchors, etc.). Maximum Fastener Diameter: 3/8". Maximum
Washer Outside Diameter: 5/8".
1 read the 1/4"-20 X 3" Screw (G) through the
Spacer (F), Brake (B) and both 1/4"-20 Hex
Nuts (E1) as shown in [FIG. 1].
2 Secure the Brake Assembly (B) to the Outlet
& Brake Side Assembly (A4) using four 8-32 x
3/8" Screw (D) as shown in [FIG. 2a].
Secure the Outlet Coupler (C) to the Outlet &
Brake Side Assembly (A4) using three 8-32 x
3/8" Screws (D) as shown in [FIG. 2c].
read the Screw (B1) through the Spring (B2)
and Handle (B) and secure to the Handle Side
Assembly (A3) [FIG. 2b].
G F
B
B
C
D
A4
A3 A4
E1
B1 B2 B
D
FIG. 2a
FIG. 2b
FIG. 1
FIG. 2c
4Oneida Air Systems
Assembly Instructions
THE WALL BRACKET SHOULD BE MOUNTED TO A STURDY, REINFORCED WALL E.G. CONCRETE WALL,
WOODFRAMED WALL, ETC. WALL ANCHORS CAN BE USED IF MOUNTING ON DRYWALL. THE INCLUDED
TEMPLATE INDICATES THE PROPER DRILL HOLES AND THE FULL, ASSEMBLED SIZE OF THE WALL
BRACKET.
Wall
Hose
Reel
3 Identify where you will install the Hose Reel
in your shop and how the hose reel will be
oriented [FIG. 3a].
Mark a straight level line. Align the top of the
template with the marked line and temporarily
secure the template to the wall with a tack or
non-marking tape [FIG. 3b].
Place a mark through the template's paper at
each indicated crosshair (four bi-directional
keyway holes), then remove the template from
the wall [FIG. 3c].
Note: DO NOT FLIP THE TEMPLATE! e
dimensions of the template are accurate to
either orientation of the Hose Reel. TheHoseReel should be mounted to a sturdy, reinforced wall (e.g.
concretewall,brick wall, wood-framed wall, etc.) Wall anchors can
beusedif mounting on drywall. This template indicates the proper
drillholesand the full, assembled size of the Hose Reel.
HoseReel Template
8-1/2"
216mm
9-3/4"
248mm
HoseReelTemplate
#ZBT000003
DrillHere
DrillHereDrillHere
DrillHere
LEVELTHIS LINE
TheHoseReel can be mounted so that the Handle is on either side
asthekeyholes are bi-directional. This does not require rotating the
templlate.Decidehow you want your Hose Reel oriented during
installationtobest meet your shop’sneeds.
HoseReel Mounting Positions
Rev:B20230314LL
FIG. 3b
FIG. 3a
FIG. 4
Mark
Here
Handle on
the left
Handle on
the right
Front View Front View
FIG. 3c
4 Using appropriate fasteners for the wall type
you are installing your system onto, drill into
and install fasteners into the wall at all marked
locations.
a. Maximum Fastener Size: 3/8" diameter
b. Maximum Washer Size: 5/8" outside
diameter
Place washers onto each fastener and thread
the fasteners into all four holes, leaving at least
1/2" outside of the hole to t the Hose Reel
Assembly [FIG. 4].
5oneida-air.com
FIG. 5a FIG. 5b
Assembly Instructions (Continued)
5 Li the Hose Reel Assembly up and over the
fasteners so that the washer is on the inside of
the Hose Reel [FIG 5a].
Slide the Hose Reel Assembly down so that the
fastener is snugly inside the smaller section of
each keyhole [FIG 5b].
Wall
6 Tighten these four fasteners to secure the Hose
Reel Assembly to the wall [FIG. 6].
Note: If installing over drywall, avoid
overtightening as it may damage the wall.
7 Clamp the Turn Key Hose Clamp (K) onto
one end of the Hose (J) [FIG. 7].
FIG. 7
FIG. 6
Assembly Instructions
6Oneida Air Systems
Assembly Instructions (Continued)
8 Feed the clamped end of the Hose (J) through
the access hole in the Core (A1) closest to the
Handle Side Assembly (A3) [FIG. 8a]. Then
attach the Hose to the Outlet Coupler (C). You
can guide the Hose by using the other access
hole in the Core closest to the Outlet & Brake
Side Assembly (A4) [FIG 8b].
FIG. 8a
FIG. 8b
Interior
View
7oneida-air.com
10 Guide the Hose (J) as you wind it around the
Core (A1) of the Body Assembly (A) so it is
neatly wrapped as shown in [FIG. 10].
Assembly Instructions (Continued)
9 Secure the Hose (J) to the Handle Side
Assembly (A3) with the Self-tapping Screw
(I) [FIG 9].
FIG.9
Customer Service Dept.
1-866-387-8822 • support@oneida-air.com
1001 West Fayette Street, Syracuse, NY 13204 U.S.A.
Copyright © 2023 Oneida Air Systems, Inc.
ank you for your business!
Regardless of where you purchased your system, if you have any
questions or issues with missing / damaged parts, please call
Oneida Air Systems rst to let us help resolve your problem.
We fully stand behind the quality of our product and place the
utmost value on our customer’s satisfaction.
We want to do everything possible to make your purchase and
experience with Oneida Air Systems a good one!
Indice
Altri manuali Oneida Air Systems Utensili
