Palmgren 9629504 Istruzioni per l’uso
Operating Instructions & Parts Manual
6” Multi-Jaw
Rotating Vice
9629504
9646388.01
PLEASE READ AND SAVE
THESE INSTRUCTIONS.
READ CAREFULLY
BEFORE ATTEMPTING
TO ASSEMBLE, INSTALL,
OPERATE OR MAINTAIN THE
PRODUCT DESCRIBED.
PROTECT YOURSELF AND
OTHERS BY OBSERVING ALL
SAFETY INFORMATION. FAILURE
TO COMPLY WITH INSTRUCTIONS
COULD RESULT IN PERSONAL
INJURY AND/OR PROPERTY
DAMAGE! RETAIN INSTRUCTIONS
FOR FUTURE REFERENCE.
PLEASE REFER TO BACK COVER
FOR INFORMATION REGARDING
PALMGREN’S WARRANTY
AND OTHER IMPORTANT
INFORMATION.
Model #: ___________________
Serial #: ___________________
Purch. Date: _______________
© 2020 Palmgren Electric Manufacturing Co.
All Rights Reserved
3
SPECIFICATIONS
Parameter Value
Jaw width 6”
Jaw opening 6”
V-Jaw opening 6.5”
Throat depth 3.5”
Pipe jaw capacity 6”
Jaw type Grooved
Size (lengthxheight) 16.5”x7.75”
Figure 1. Vice Exploded Parts View
Ref # Description Part number Qty
15 Washer * 1
16 Leadscrew 9646434.01 1
17 Handle 9646435.01 1
18 Rubber ring 9646436.01 2
19 Jaw plate 9646437.01 2
20 Jaw plate set screw * 4
21 Pipe jaw 9646438.01 3
22 Nut 9646439.01 4
23 Front pipe jaw set
screw
* 2
24 Back pipe jaw set
screw
* 2
25 Front V-pipe jaw 9646440.01 1
26 Back V-pipe jaw 9646441.01 1
27 V-pipe jaw set screw * 3
Ref # Description Part number Qty
1 Locking Nut 9646423.01 2
2 Leadscrew nut 9646424.01 1
3 Anvil Frame 9646425.01 1
4 Back Jaw 9646426.01 1
5 Front Jaw 9646427.01 1
6 Leadscrew nut fixed
bolt
* 2
7 Locking pin nut 9646428.01 1
8 E-clip washer 9646429.01 1
9 Spring 9646430.01 1
10 Locking pin nut 9646431.01 1
11 Swivel Base 9646432.01 1
12 Base plate 9646433.01 1
13 Locking bolt * 2
14 Stop nut * 1
PALMGREN WARRANTY
C.H. Hanson / Palmgren warrants their products to be free of defects in material or
workmanship. This warranty does not cover defects due directly or indirectly to misuse,
abuse, normal wear and tear, failure to properly maintain the product, heated, ground or
otherwise altered, or used for a purpose other than that for which is was intended.
The warranty does not cover expendable and/or wear part (i.e. v-belts, screws, abrasives,
jaws), damage to tools arising from alteration, abuse or use other than their intended
purpose, packing and freight. The duration of this warranty is expressly limited to the terms
noted below beginning from the date of delivery to the original user.
The Palmgren branded items carry the following warranties on parts:
All vises, clamps, positioning tables, tombstones, jack screws and vise
accessories - LIFETIME.
All bench grinders, drill presses, tapping machines, band saws, lathes, milling
machines, arbor presses, abrasive finishing machines and work stands - 3
YEARS.
The obligation of C.H. Hanson / Palmgren is limited solely to the repair or replacement, at
our option, at its factory or authorized repair agent of any part that should prove inoperable.
Purchaser must lubricate and maintain the product under normal operating conditions at
all times. Prior to operation become familiar with product and the included materials, i.e.
warnings, cautions and manuals.
Failure to follow these instructions will void the warranty.
This warranty is the purchaser’s exclusive remedy against C.H. Hanson for any inoperable
parts in its product. Under no circumstances is C.H. Hanson liable for any direct, indirect,
incidental , special or consequential damages including loss of profits in any way elated to
the use or inability to use our products. This warranty gives you specific legal rights which
may vary from state to state.
Palmgren - a C.H. Hanson Company
2000 N. Aurora Rd., Naperville, IL
60563
U.S.A.
or call 1-800-827-3398
Altri manuali Palmgren Utensili
