Parkside PHZ 3 A1 Manuale utente
IAN 364230_2010
HAMMER PULL BAR / HAMMER-ZUGEISEN /
TIRE-LAME MARTEAU PHZ 3 A1
TIRE-LAME MARTEAU
Mode d’emploi
HAMMER-ZUGEISEN
Bedienungsanleitung
HAMMER PULL BAR
Operating instructions
HAMER-TREKIJZER
Gebruiksaanwijzing
PŘÍKLEPOVÉ KLADIVO
Návod k obsluze DOCIĄGACZ DO PANELI
Instrukcja obsługi
KLADIVOVÉ ŤAHADLO
Návod na obsluhu
HAMMERTRÆKNINGSJERN
Betjeningsvejledning
KIT COLOCACIÓN SUELOS
LAMINADOS
Instrucciones de uso
GB/ IE Operating instructions Page 1
DE/AT/CH Bedienungsanleitung Seite 9
FR/BE Mode d’emploi Page 17
NL/BE Gebruiksaanwijzing Pagina 25
CZ Návod k obsluze Strana 33
PL Instrukcja obsługi Strona 41
SK Návod na obsluhu Strana 49
ES Instrucciones de uso Página 57
DK Betjeningsvejledning Side 65
PHZ 3 A1 GB│IE │ 1 ■
Contents
Introduction...................................2
Information about these operating instructions.................2
Proper use ............................................2
Safety .......................................3
Package contents ..............................4
Use ..........................................4
Cleaning and storage...........................6
Disposal......................................6
Service .......................................7
Importer .....................................8
PHZ 3 A1
■ 2 │ GB│IE
Introduction
Information about these operating instructions
Congratulations!
You have purchased a high-quality product. Familiarise
yourself with the product before using it for the first time. To
do this, read the following operating instructions thoroughly. Use the
product only as described and for the range of applications specified.
Keep these operating instructions in a safe place. Please also pass
these operating instructions on to any future owner(s).
Proper use
The product is used exclusively for the joint-free bonding of laminate
and parquet flooring and replaces the need for hammers, mallets and
pull bars. The product can be used for all material thicknesses from
7 to 13mm. Commercial or industrial use is not permitted. No liability
will be assumed in cases of improper use. No liability will be assumed
for damage caused by misuse or improper handling, the use of force
or unauthorised modification. The risk is borne solely by the user.
PHZ 3 A1 GB│IE │ 3 ■
Safety
■ Check the product before every use to make sure it is in perfect
condition. Do not use the product if it is damaged in any way.
■ Do not allow children to use the product unless they are being
supervised. Children are not always able to correctly recognise
potential dangers. This product is not a toy.
■ This product is not intended for use by individuals (including
children) with reduced physical, sensory, or mental capabilities.
It may also not be used by individuals who lack experience and/
or knowledge unless they are supervised by a person responsible
for their safety or have received instructions on how to use the
product from such a person.
■ Use protective equipment. For your own
safety, always wear ear muffs, a breathing
mask/dust mask, safety goggles and safety gloves.
■ Warning! Risk of crushing! A jerking movement is necessary when
using the product. Make sure that you do not injure yourself.
■ Rusty discolorations or other signs of chemical or mechanical
change to the parts can cause premature failure of the parts.
PHZ 3 A1
■ 4 │ GB│IE
Package contents
▯ Hammer Pull Bar
▯ These operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result
of defective packaging or during transport, contact the customer
service hotline (see section Service).
Use
NOTE
► The product can be used for all material thicknesses from 7 to
13mm.
With the help of the product, you can join laminate and parquet boards
without joints and without the need for hammers, tapping wood and
pull bars. The integrated pull bar transfers the force to the edge of the
board when pulling the carriage towards the rear stop. The product is
particularly suitable for the last row of boards by the wall.
♦ Place the pull bar on a board.
♦ Loosen the black locking screw on the carriage so you can move
the carriage.
♦ Hold the back stop with one hand to stabilise the product.
PHZ 3 A1 GB│IE │ 5 ■
WARNING! RISK OF CRUSHING!
► Be careful not to hurt your fingers when moving the carriage
forwards or backwards.
♦ Hold the red handle firmly with your other hand and push the
carriage towards the pull bar as a starting position.
♦ Pull the red handle towards the rear stop. The board is joined
seamlessly.
♦ If the board is not joined seamlessly, repeat the process with more
force.
♦ After use, tighten the black locking screw on the carriage to
prevent unintentional movement of the carriage.
PHZ 3 A1
■ 6 │ GB│IE
Cleaning and storage
ATTENTION! PROPERTY DAMAGE!
► Do not use aggressive or abrasive cleaning agents, as these
can damage the surfaces of the product.
♦ Clean the product using a dry cloth.
♦ Store the product in a clean, dry location away from direct
sunlight.
Disposal
Dispose of the product via an approved waste disposal
company or your municipal waste disposal facility.
Comply with all applicable regulations. Please contact
your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can
provide information on how to dispose of the worn-out
product.
The product is recyclable, subject to extended producer
responsibility and is collected separately.
PHZ 3 A1 GB│IE │ 7 ■
Dispose of the packaging in an environmentally friendly
manner.
Note the labelling on the packaging and separate the
packaging material components for disposal, if neces-
sary. The packaging material is labelled with abbrevia-
tions (a) and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard, 80–98:
composites.
Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: [email protected]
Service Ireland
Tel.: 1890 930 034
(0,08EUR/ Min.,(peak))
(0,06EUR/ Min.,(off peak))
E-Mail: [email protected]
IAN 364230_2010
PHZ 3 A1
■ 8 │ GB│IE
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Altri manuali per PHZ 3 A1
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Parkside Utensili
Parkside
Parkside PAGG 4 A1 Manuale utente
Parkside
Parkside 373204 2104 Manuale utente
Parkside
Parkside PVL 1 A1 Manuale utente
Parkside
Parkside PGG 15 A1 Manuale utente
Parkside
Parkside 73785 Manuale utente
Parkside
Parkside PDNE 4000 A1 Manuale utente
Parkside
Parkside BMR 1400 Manuale utente
Parkside
Parkside PSVH 56 A1 Manuale utente
Parkside
Parkside 73782 Manuale utente
Parkside
Parkside PDT 40 C2 Manuale utente
Parkside
Parkside PDT 40 A1 Manuale utente
Parkside
Parkside PDMH 4500 A2 Manuale utente
Parkside
Parkside PSS 65 A1 Manuale utente
Parkside
Parkside PDMH 4500 A2 Manuale utente
Parkside
Parkside PDT 40 C2 Manuale utente
Parkside
Parkside PDSS 13 D4 Manuale utente
Parkside
Parkside 345881 2004 Manuale utente
Parkside
Parkside 89568 Manuale utente
Parkside
Parkside 373883 2104 Manuale utente
Parkside
Parkside PAMFW 12 C3 Manuale utente
