PeakTech 5160 Manuale utente
PeakTech
® 5160
Bedienungsanleitung /
Operation Manual
Lufttemperatur & -Feuchtigkeitsmessgerät /
Air Temperature & Humidity Meter
1. Safety precautions
This product complies with the requirements of the following
directives of the European Union for CE conformity: 2014/30/EU
(electromagnetic compatibility), 2011/65/EU (RoHS).
The following safety precautions must be observed before
operation. Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever:
* Comply with the warning labels and other info on the
equipment.
* Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before
taking up measurement (important for exact measurements).
*Replace the battery as soon as the battery indicator “ ”
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
* Fetch out the battery when the meter will not be used for long
period.
* Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
* Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable
substances.
* Do not modify the meter in any way.
* Opening the equipment and service- and repair work must only
be performed by qualified service personnel.
* Measuring instruments don’t belong to children hands.
-10-
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild householder cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
Introduction
This newly developed instrument measures the current humidity,
as well as the current air temperature installed a set of sensors for
fast and accurate evaluation of the measurement results.
2. Features
►3 -digit 10mm LCD display (max. 999)
►Automatic backlight
►Humidity measurement in %R. H.
►Air temperature in °C or °F
►Fast response time of the sensor
►Rugged and compact housing design
►Data hold
-11-
3. Specifications
Display
LCD with automatic backlight
Measurement
Range
R.H.:
Temp. :
10% ~ 99%
-10°C ~ 50°C
(14°F ~ 122°F)
Resolution:
R.H.:
Temperatur:
0.1 %RH
0,1 °C
Accuracy
%R.H.:
Temperatur:
+/- 5,0%
(at 25°C; 10~30%RH)
+/- 3,0%
(at 25°C; 30~99%RH)
+/- 1°C
(+/- 2.6°F)
Measuring Rate
2 x / second
Low Battery
Indication
Symbol “ “ shown in the display, if
battery voltage is low
Auto Power Off
After 10 Minutes
DATA-HOLD
Holds measurement value in display
Power Supply
9V battery, 6F22 or equivalent
Operating
Environment
-10°C ~ 40°C; <99% RH
Storage
Environment
-10°C ~ 60°C; <70% RH
Size (WxHxD)
55 x 145 x 35mm
Weight
158g
-12-
4. Panel Description
1) Temperature / Humidity Sensor
2.) ON - Power switch
3.) Temp. / Humidity - button
4.) HOLD - button
5.) Brightness sensor
6.) Measured value display
7.) Battery compartment (rear)
8.) Thread for tripod (rear)
-13-
5
2
4
7
8
3
6
1
4.1. Display Symbols
This icon indicates the battery status. An empty
battery must be replaced as soon as possible and
affect the measurement results negatively
HOLD
Data-Hold: Keeps the current value in display
Percent (unit of Relative Humidity)
Celsius degree
Fahrenheit degree
5. Operating Instruction
1. Press the "ON" button to turn on the unit.
2. Select the desired measurement function:
Select the measurement function with the option key (3) on the
device’s side.
The three possible measurement functions are:
% R.H. (Relative Humidity)
%
°C Temperature Measurement
°F Temperature Measurement
After the desired measurement function is selected, the device
automatically switches from the selection mode to measuring mode
and you can start your measurements.
-14-
6. Performing Measurement
General:
1. Temperature measurement:
The display shows the air temperature in °C/°F.
2. Humidity measurement:
The display shows the relative humidity in %RH.
Humidity refers to the amount of water vapor at room or
ambient air.
3. To "freeze" the current reading press the "HOLD" - button.
The display stops updating the measured values and the
"HOLD" - symbol appears.
Automatic Power Off:
If the device is no longer used, it will automatically turn off after 10
minutes.
Backlight:
This unit features an automatic backlight, which activates the
backlight when the light sensor on the front panel detects low light
conditions.
-15-
7. Battery Replacement
If the sign “ ” appears on the LCD display, it indicates that the
battery should be replaced.
Remove the back cover and open the battery compartment.
Replace the exhausted battery with new battery.
Batteries, which are used up dispose duly. Used up batteries are
hazardous and must be given in the - for this being supposed -
collective container.
NOTE
1. Keep the instrument dry.
2. Keep the probes clean.
3. Keep the instrument and battery out of reach of infant and
child.
4. When the symbol ” ” appears, the battery is low and should
be replaced immediately. When you install battery, ensure the
polarity connections are correct. If you will not use the
instrument in a long period of time, remove the battery.
-16-
7.1. Notification about the Battery Regulation
The delivery of many devices includes batteries, which for example
serve to operate the remote control. There also could be batteries
or accumulators built into the device itself. In connection with the
sale of these batteries or accumulators, we are obliged under the
Battery Regulations to notify our customers of the following:
Please dispose of oldbatteries at a council collection pointor return
them to a local shop at no cost. The disposal in domestic refuse is
strictly forbidden according to the Battery Regulations. You can
return used batteries obtained from us at no charge at the address
on the last side in this manual or by posting with sufficient stamps.
Contaminated batteries shall be marked with a symbol consisting
of a crossed-out refuse bin and thechemical symbol (Cd, Hg or Pb)
of the heavy metal which is responsible for the classification as
pollutant:
1. "Cd" means cadmium.
2. "Hg" means mercury.
3. "Pb" stands for lead.
-17-
All rights, also for translation, reprinting and copy of this manual
or parts are reserved.
Reproductions of all kinds (photocopy, microfilm or other) only by
written permission of the publisher.
This manual is according the latest technical knowing. Technical
alterations reserved.
We herewith confirm that the unit is calibrated by the factory
according to the specifications as per the technical specifications.
We recommend to calibrate the unit again, after one year.
© PeakTech®08/2021 MP/Ehr.
Altri manuali per 5160
1
Indice
Altri manuali PeakTech Strumento di misura
PeakTech
PeakTech 3295 Manuale utente
PeakTech
PeakTech 3349 Manuale utente
PeakTech
PeakTech 5145 Manuale utente
PeakTech
PeakTech 9010 Manuale utente
PeakTech
PeakTech 5175 Manuale utente
PeakTech
PeakTech 5225 Manuale utente
PeakTech
PeakTech 1640 Manuale utente
PeakTech
PeakTech 3203 Manuale utente
PeakTech
PeakTech PeakTech 5315 Manuale utente
PeakTech
PeakTech 2170 Manuale utente
PeakTech
PeakTech 1645 Manuale utente
PeakTech
PeakTech 1010 Manuale utente
PeakTech
PeakTech 1655 Manuale utente
PeakTech
PeakTech 1660 Manuale utente
PeakTech
PeakTech 5145 Manuale utente
PeakTech
PeakTech 5060 Manuale utente
PeakTech
PeakTech 2705 Manuale utente
PeakTech
PeakTech 3432 Manuale utente
PeakTech
PeakTech 1670 Manuale utente
PeakTech
PeakTech 9015 Manuale utente
