Philips VL72 Manuale utente

OUT TO SUPPLY WIRES

SEE NOTE 3

STREET SIDE LABEL

SEE NOTE 5

POLE FASTENERS

SEE NOTES 2 & 6

INSTALLATION:

TURN POWER OFF.

2) Loosen pole fasteners on pod, if required.

3) Make fixture wiring connections to supply wires (by others)

- White to White

- Black to Black

- Green to Green

NOTE:

Both green ground wires from fixture should be

"bugged" together with incoming supply wire.

4) Slip luminaire post fitter onto pole and ensure wires

are not being pinched.

5) Orient by turning luminaire "street side" via label

supplied on globe fitter (pod).

6) Torque pole fasteners as follows to 7 ft. lbs.

CAUTION!

Over torquing of screws may lead to

damage or fatique of fastener.

7) Power to luminaire may now be turned on.

32002016, revision A

INSTALLATION INSTRUCTIONS:

VL71 & VL72

(Fixture)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

Ensure that the AC service is OFF before any installation or maintenance.

Do not switch service to ON until the entire installation is complete.

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-5/32" Allen Wrench/Driver

-Torque Wrench capable of 7 ft. lbs. torque

This fixture is intended for installation in accordance with the National Electrical Code and local code

specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage to

the fixture components and void the warranty. These instructions do not purport to cover all details or vairations

in equipment, nor to provide for every possible contingency related to installation, operation, maintenance, or

mounting situation. Should specific problems occur that are not addressed by these instructions, contact your

Sales Representative or distributor for assistance. Retain these instructions for future reference.

POD

(EXISTING)

LOOSEN FASTENERS

TO REMOVE GLOBE

(EXISTING)

CAMDEN ADAPTER

(NEW)

1/4-20 SCREWS

(NEW)

ECOSWAP ASSY

(NEW)

INSTALLATION:

TURN POWER OFF.

2) Loosen, but do not remove (4) globe fasteners on pod.

3) Lift globe from fixture.

4) Remove existing ballast assembly.

- Push spring clip to release ballast module, twist ballast

module counter-clockwise, and lift to remove.

- Disconnect blue power quick disconnect.

5) Remove ballast assembly ring by removing existing screws.

6) Remove terminal block and bracket (if applicable)

7) Assemble Ecoswap to camden adapter by twisting

clockwise until spring clip snaps into place.

8) Make proper wiring connections.

NOTE:

In many cases, you may need to remove existing

blue power disconnect to "bug" wires.

9) Install entire unit onto fixture with (2) 1/4-20 screws while

ensuring wires are not being pinched.

NOTE:

For Type 3 distribution modules, rotate to orient

"Street Side (SS)" identification located on

Ecoswap, toward street.

10) Carefully lower globe onto fixture.

11) Tighten (4) globe fasteners to secure globe.

REFERENCE:

Please see enclosed Power Selection drawing

to adjust wattage output of Ecoswap module.

32002016, revision A

INSTALLATION INSTRUCTIONS:

V71 & V72

(Retrofit)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW

TO COOL BEFORE PERFORMING ANY MAINTENANCE

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-1/2" Socket/Driver

-5/32" Allen Wrench/Driver

-Philips Head Screw Driver

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Philips Apparecchio di illuminazione

Philips

Philips 6913087PH Manuale

Philips

Philips 6911232PH Manuale

Philips

Philips 6910131PH Manuale

Philips

Philips C4TCA2 Manuale utente

Philips

Philips GreenSpace Accent Elbow Manuale utente

Philips

Philips 40747-48-16 Manuale utente

Philips

Philips 1050DRN_3D Manuale utente

Philips

Philips 37951-17-16 Manuale utente

Philips

Philips Brisa FP28UDA Guida utente

Philips

Philips PTS5-1 Manuale utente

Philips

Philips Paraplus II PPH2G8FW217 Manuale utente

Philips

Philips HF3650 Manuale utente

Philips

Philips Skyway SKS2GPK2FT Manuale utente

Philips

Philips Calculite 8044 Manuale utente

Philips

Philips 8719514305106 Manuale utente

Philips

Philips ProSpec 37107 Manuale utente

Philips

Philips Calculite 8046 Manuale utente

Philips

Philips 1050SQ_3D Manuale utente

Philips

Philips ProSpec 37108 Manuale utente

Philips

Philips 8122 Manuale utente

Philips

Philips Bodine B30ST Manuale utente

Philips

Philips Calculite 8091CB Manuale utente

Philips

Philips Lytespan 23F39T6 Manuale utente

Philips

Philips PTS7-1 Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

ArtFox

ArtFox Beam 15R extreme Manuale utente