
Clean the Motor Head and Base with a damp cloth and wash the Bowl, the
Pouring Shield and accessories you wish to use with water & detergent with a
non-abrasive sponge. DO NOT use metal scouring pads. The Bowl & accessories
may be cleaned in the dishwasher but NOT the Pouring Shield. The Motor Head
and Base may NOT be immersed in water. Dry the components thoroughly and
place them in their working positions.
Place the appliance on a flat, dry surface. Assemble the appliance and accessories
according to the instructions listed in the section (“How to Use”) below. Check
that the Bowl is correctly positioned and locked into the Bowl Base before you
start using the appliance with its accessories.
Before adding ingredients, make sure the accessories are in place and are running
smoothly.
overload the Bowl by filling it past the MAX volume indicated;
cover the appliance during functioning;
obstruct totally nor partially the accessory;
allow hands, hair, clothing, curtains, spatulas and any other objects to come into
contact with the appliance’s motor, accessories and Bowl to avoid personal injury
or damage to the machine when the appliance is in operation;
place the appliance in the microwave oven or refrigerator for freezing, so as to
avoid breaking or damaging it;
place foods or liquids which are hotter than 60°C, or use boiling water for cleaning;
use the Wire Whisk to process very hard ingredients such as coffee beans,
soybeans, rice, ice cubes or other frozen foods;
remove accessories while the appliance is in operation;
release or remove the Bowl while the appliance is operating
operate the appliance for more than 10 minutes without interruption. Let the
appliance rest for 5 minutes between processing cycles. After 3 processing cycles,
allow an interval of 30 minutes to let the appliance cool down before the next use,
so as to prolong its service life. DO NOT allow the appliance to idle while in
operation;
press the Head Raising/Lowering Release Button or turn the ON/OFF & Speed
Knob too hard so as to avoid any damage;
leave the appliance unsupervised during operation.
13.
14.
15.
16.
If you are using the appliance for the first time, you should:
a.
b.
c.
Make sure to remove any label or protective sheet which may prevent its proper
functioning.
DO NOT:
•
•
•
•
•
•
•
•
•
•
•
•
Before plugging & unplugging the appliance, turn the ON/OFF & Speed Knob to ‘0’
(OFF). Plug and unplug the power cable holding it firmly with dry hands. Always
unplug the power cable to avoid overheating and avoid stretching it (DO NOT pull
it, tug it or use it to drag the appliance to which is connected).
During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
DO NOT soak the Motor Head & Base in water or other liquids, wash it under the tap,
or let any liquid flow into the internal casing of the appliance to prevent electric
shock. In case of accidental fall in water, DO NOT try to take it out, but first of all
unplug immediately the power cable from the socket.
4