PRECISION DIGITAL SABRE T PD743 Manuale utente

PRECISION DIGITAL CORPORATION

233 South Street • Hopkinton MA 01748 USA

Tel (800) 343-1001 • Fax (508) 655-8990

www.predig.com

SABRE T MODEL PD743

TEMPERATURE METER

Instruction Manual

•J, K, T, E Thermocouple & 100 ΩPt RTD

•Pre-Calibrated for All Input Types

•Type 4X, NEMA 4X, IP65 Front

•Shallow Depth Case 3.2" Behind Panel

•4 Digit Display, 0.56" (14 mm) High, Red LEDs

•Easy Front Panel Programming

•Maximum/Minimum Display

•Universal Power Supply 85-265 VAC

•12-36 VDC/12-24 VAC Power Option

Sabre T Model PD743 Temperature Meter Instruction Manual

Disclaimer

The information contained in this document is subject to change

without notice. Precision Digital makes no representations or war-

ranties with respect to the contents hereof, and specifically disclaims

any implied warranties of merchantability or fitness for a particular

purpose.

INTRODUCTION

The Sabre T model PD743 is an easy-to-use temperature meter. It accepts

type J, K, T, E thermocouple and 100 Ωplatinum RTD sensors. The four

front panel buttons make the setup and programming an easy task.

ORDERING INFORMATION

85-265 VAC*

Model

12-36 VDC*

Model Description

PD743-6R0-0 PD743-7R0-0 Temperature Meter

*All models may be powered from AC or DC, see Specifications for details.

NEMA 4 & NEMA 4X Enclosures

Model # of

Meters

Description Mounting

PDA2500 1 - 6 Plastic NEMA 4X Enclosure Through Door

PDA2600 1 - 6 Stainless Steel NEMA 4X Enclosure Through Door

PDA2700 1 - 6 Steel NEMA 4 Enclosure Through Door

PDA2801 1 Plastic NEMA 4X Enclosure Through Cover

Sabre T Model PD743 Temperature Meter Instruction Manual

Table of Contents

INTRODUCTION ------------------------------------------------------------ 2

ORDERING INFORMATION --------------------------------------------- 2

SPECIFICATIONS---------------------------------------------------------- 5

General-------------------------------------------------------------------------------5

Temperature Inputs -------------------------------------------------------------- 6

COMPLIANCE INFORMATION ----------------------------------------- 7

Safety --------------------------------------------------------------------------------- 7

Electromagnetic Compatibility-----------------------------------------------7

SAFETY INFORMATION ------------------------------------------------- 8

INSTALLATION ------------------------------------------------------------- 9

Unpacking--------------------------------------------------------------------------- 9

Panel Mounting-------------------------------------------------------------------- 9

Connections---------------------------------------------------------------------- 10

Connector Labeling ---------------------------------------------------------- 10

Power Connections ---------------------------------------------------------- 10

Signal Connections ---------------------------------------------------------- 11

SETUP AND PROGRAMMING ----------------------------------------14

Front Panel Buttons and Status LED Indicators --------------------- 15

Display Functions and Messages----------------------------------------- 16

Main Menu ------------------------------------------------------------------------ 17

Setting Numeric Values ------------------------------------------------------ 18

Setting Up the Meter (setu) ------------------------------------------------- 18

Setting the Input Signal (inpt) -------------------------------------------- 19

Setting the Temperature Scale (F C) ---------------------------------- 20

Programming the Meter (prog)--------------------------------------------- 21

Recalibrating Temperature Inputs (Cal) -------------------------------- 21

Setting Up the Password (pass) ------------------------------------------- 24

Locking the Meter ------------------------------------------------------------ 24

Unlocking the Meter---------------------------------------------------------- 24

OPERATION ----------------------------------------------------------------26

Front Panel Buttons Operation -------------------------------------------- 26

Maximum/Minimum Readings---------------------------------------------- 27

MOUNTING DIMENSIONS ----------------------------------------------28

TROUBLESHOOTING----------------------------------------------------29

Sabre T Model PD743 Temperature Meter Instruction Manual

Troubleshooting Tips --------------------------------------------------------- 29

QUICK USER INTERFACE REFERENCE GUIDE----------------30

EU DECLARATION OF CONFORMITY -----------------------------31

Table of Figures

Figure 1. Panel Cutout and Mounting................................................. 9

Figure 2. Connector Labeling............................................................ 10

Figure 3. Power Connections ............................................................10

Figure 4. Thermocouple Input Connections .................................... 11

Figure 5. Three-Wire RTD Input Connections ..................................12

Figure 6. Two-Wire RTD Input Connections..................................... 12

Figure 7. Four-Wire RTD Input Connections....................................13

Figure 8. Meter Dimensions - Side View...........................................28

Figure 9. Case Dimensions - Top View.............................................28

Sabre T Model PD743 Temperature Meter Instruction Manual

SPECIFICATIONS

Except where noted all specifications apply to operation at +25°C.

General

DISPLAY 0.56" (14 mm) high, red LED

Four digits, automatic lead zero blanking.

DISPLAY

UPDATE RATE

RTD: 5/second

Thermocouple: 2.5/second

OVERRANGE Display flashes 9999

UNDERRANGE Display flashes -1999

PROGRAMMING

METHODS

Four front panel buttons

RECALIBRATION All ranges are calibrated at the factory. Recalibration is

recommended at least every 12 months.

MAX/MIN

DISPLAY

Max/min readings reached by the process are stored until

reset by the user or until power to the meter is turned off.

PASSWORD Programmable password restricts modification of

programmed settings.

NON-VOLATILE

MEMORY

All programmed settings are stored in non-volatile memory

for a minimum of ten years if power is lost.

POWER

OPTIONS

85-265 VAC, 50/60 Hz; 90-265 VDC, 8 W max

or 12-36 VDC, 12-24 VAC, 6 W max

FUSE Required fuse: UL Recognized, 5 A max, slow blow

Up to 6 meters may share one 5 A fuse

NORMAL MODE

REJECTION

64 dB at 50/60 Hz

ISOLATION 4 kV input-to-power line

OVERVOLTAGE

CATEGORY

Installation Overvoltage Category II:

Local level with smaller transient overvoltages than Instal-

lation Overvoltage Category III.

ENVIRONMENTAL Operating temperature range: 0 to 65°C

Storage temperature range: -40 to 85°C

Relative humidity: 0 to 90% non-condensing

CONNECTIONS Removable screw terminal blocks accept 12 to 22 AWG

wire, RJ11 for factory use only.

ENCLOSURE 1/8 DIN, high impact plastic, UL 94V-0, color: gray

MOUNTING 1/8 DIN panel cutout required. Two panel mounting

bracket assemblies provided

Sabre T Model PD743 Temperature Meter Instruction Manual

TIGHTENING

TORQUE

Screw terminal connectors: 5 lb-in (0.56 Nm)

OVERALL

DIMENSIONS

2.45" x 4.68" x 3.79" (62 mm x 119 mm x 96 mm)

(H x W x D)

WEIGHT 8.5 oz (241 g)

WARRANTY 1 year parts & labor

EXTENDED

WARRANTY

1 or 2 years, refer to the Price List for details.

Temperature Inputs

INPUTS Field selectable: Type J, K, T, or E thermocouples;

100 Ωplatinum RTD (0.00385 or 0.00392 curve)

RESOLUTION 1°for all thermocouples and RTD inputs

1°or 0.1°for Type T thermocouple

ACCURACY

Input Type Range Accuracy

Type J -58°to 1382°F

-50°to 750°C

±2°F

±1°C

Type K -58°to 2300°F

-50°to 1260°C

±2°F

±1°C

Type T -292°to 700°F

-180°to 371°C

±2°F

±1°C

Type T

0.1°Res

-199.9°to 700.0°F

-180.0°to 371.0°C

±1.8°F

±1.0°C

Type E -58°to 1700°F

-50°to 927°C

±2°F

±1°C

100 ΩRTD -328°to 1382°F

-200°to 750°C

±1°F

±1°C

COLD

JUNCTION

REFERENCE

Automatic, fixed, no user calibration needed

TEMPERATURE

DRIFT

±2°C maximum

0 to 65°C ambient temperature

INPUT

IMPEDANCE

Greater than 100 kΩ

Sabre T Model PD743 Temperature Meter Instruction Manual

COMPLIANCE INFORMATION

Safety

UL LISTED USA and Canada

UL 508 Industrial Control Equipment

UL FILE NUMBER E160849

FRONT PANEL UL Type 4X, NEMA 4X, IP65; panel gasket provided

LOW VOLTAGE

DIRECTIVE

EN 61010-1:2010

Safety requirements for measurement, control, and

laboratory use

Electromagnetic Compatibility

EMISSIONS EN 55011:2009+A1:2010

Group 1 Class A ISM emissions requirements

Radiated

Emissions

Class A

AC Mains Con-

ducted Emissions

Class A

IMMUNITY EN 61326-1:2013

Measurement, control, and laboratory equipment

EN 61000-6-2:2005

EMC heavy industrial generic immunity standard

RFI - Amplitude

Modulated

80 -1000 MHz 10 V/m 80% AM (1 kHz)

1.4 - 2.0 GHz 3 V/m 80% AM (1 kHz)

2.0 - 2.7 GHz 1 V/m 80% AM (1 kHz)

Electrical Fast

Transients

±2kV AC mains, ±1kV other

Electrostatic

Discharge

±4kV contact, ±8kV air

RFI - Conducted 10V, 0.15-80 MHz, 1kHz 80% AM

AC Surge ±2kV Common, ±1kV Differential

Surge 1KV (CM)

Power-Frequency

Magnetic Field

30 A/m 70%V for 0.5 period

Voltage Dips 40%V for 5 & 50 periods

70%V for 25 periods

Voltage

Interruptions

<5%V for 250 periods

Sabre T Model PD743 Temperature Meter Instruction Manual

Note:

Testing was conducted on PD743 meters installed through the co-

vers of grounded metal enclosures with cable shields grounded at

the point of entry representing installations designed to optimize

EMC performance.

Declaration of Conformity available at www.predig.com

SAFETY INFORMATION

CAUTION: Read complete

instructions prior to instal-

lation and operation of the

meter.

WARNING: Risk of

electric shock.

WARNING

Hazardous voltages exist within enclosure. Installation and service

should be performed only by trained service personnel.

Sabre T Model PD743 Temperature Meter Instruction Manual

INSTALLATION

There is no need to remove the meter from its case to com-

plete the installation, wiring, and setup of the meter.

Unpacking

Remove the meter from box. Inspect the packaging and con-

tents for damage. Report damages, if any, to the carrier.

If any part is missing or the meter malfunctions, please contact

your supplier or the factory for assistance.

Panel Mounting

•Prepare a standard 1/8 DIN panel cutout – 3.622" x 1.772" (92 mm

x 45 mm). Refer to Mounting Dimensions, page 28 for more details.

•Clearance: allow at least 4" (102 mm) behind the panel for wiring.

•Panel thickness: 0.04" - 0.25" (1.0 mm - 6.4 mm).

Recommended minimum panel thickness to maintain Type 4X

rating: 0.06" (1.5 mm) steel panel, 0.16" (4.1 mm) plastic panel.

•Remove the two mounting brackets provided with the meter (back-off

the two screws so that there is ¼" (6.4 mm) or less through the

bracket. Slide the bracket toward the front of the case and remove).

•Insert meter into the panel cutout.

•Install mounting brackets and tighten the screws against the panel.

To achieve a proper seal, tighten the mounting bracket screws

evenly until meter is snug to the panel along its short side. DO NOT

OVER TIGHTEN, as the rear of the panel may be damaged.

Figure 1. Panel Cutout and Mounting

Panel

Gasket

Mounting

Bracket

Mounting

Screw

Removable

Connectors

3.622" (92mm)

1.772"

(45mm) Panel Cutout

to DIN 43700

Square Corners to 0.060"

(1.5mm) Max Radius

Tolerances:

A: +0.032 (+0.8mm)

-0.000 (-0.0mm)

B: +0.024 (+0.6mm)

-0.000 (-0.0mm)

Sabre T Model PD743 Temperature Meter Instruction Manual

Connections

All connections are made to removable screw terminal connectors

located at the rear of the meter.

Use copper wire with 60°C or 60/75°C insulation

for all line voltage connections. Observe all safety

regulations. Electrical wiring should be performed

in accordance with all applicable national, state,

and local codes to prevent damage to the meter

and ensure personnel safety.

Connector Labeling

The connectors label, affixed to the meter, shows the location of the

connectors. It also identifies the location of the RTD/TC selector switch.

Figure 2. Connector Labeling

Power Connections

Power connections are made to a two-terminal connector labeled

POWER on Figure 2. The meter will operate regardless of DC polarity

connection. The + and - symbols are only a suggested wiring convention.

Figure 3. Power Connections

DW1912

POWER

EXC T+XX COM Factory

Use

Only

3412 5

SIGNAL

RTD TC

SWITCH

RTD

AC or DC

POWER

Required External Fuse:

5 A max, Slow Blow

POWER CONNECTOR

Altri manuali per SABRE T PD743

Indice

Altri manuali PRECISION DIGITAL Strumento di misura

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-RTP PD6830 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL PD661 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Javelin D PD644 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD689 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-7000 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL vantageview Safe Touch PD6700 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6200 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL PD603 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL pd663 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL NOVA PD560 Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6060 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProtEx Pro PD6800-0L1 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-6001 Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL pd663 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL Sabre Series Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL PD660 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL PD677 Manuale utente

PRECISION DIGITAL

PRECISION DIGITAL PD655 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente