TROUBLESHOOTING
TO PREVENTINJURY,ALWAYS
DISCONNECT THE AIR SUPPLY HOSE
WHEN ADJUSTING,SERVICING OR
DISASSEMBLING THE TOOL.
FIRST:CHECK THE COMPRESSED AIR SUPPLY
Manyofproblemscomefromafaultyor inadequate
compressed airsupply system.Before attempting to
repairthe tool,the following points shouldbe
checked:
•Checkthe pressureattheoutputofthecompressor;
adjust to80-100 psi(5.5-7.0bar) as required.
•Checkthetankpressureofthecompressor&adjust
the start/stop limits.
•Check the airdeliverysystem;a3/8"hoseis
recommended.
•Usefewer tools simultaneously;do not exceed the
capacityofthe compressor or ofthe delivery
system.
•Drainwater fromthe compressor.
SECOND:CHECK FOR AIR LEAKS
At rest, thistoolshouldnothaveanyairleaks. Before
attempting torepairthe tooland replaceparts, check
the following:
•Check all sealsinhead,valveand piston
assemblies; replaceif necessary.
•Check the top edge ofmaincylinder for burrsor
dents.
•Clean &lubricatethe head and valveassemblies;
re-assemblethe head assemblycarefully.
•Check the interior of the head for scratches.
A more comprehensivelist of tips and
hints at
http://ts.primatech.ca/tips
SCHEMATICS
Withyour toolSerialNumber at hand,
go toour support web sitetoretrieve
the schematic specific toyour tool:
http://ts.primatech.ca/145
For more information, contact technicalsupport:
byphone 1 (800) 363-1962
byemail support@primatech.ca
TOOL WARRANTYAND LIMITATIONS
Primatechwarrants thatnewlypurchased fastening
tools,parts and accessorieswill be free fromdefectsin
materialand workmanship(excluding wear parts)for
the period shownbelow, after the dateof purchaseby
the originaluser asevidenced byavalidpurchase
invoice.
ONE-YEARLIMITEDWARRANTYwill applytoall
parts, except thosesubjected tonormalwear
WARRANTYSTATEMENT
Primatech‘ssoleliabilityhereunder will be toreplace
anypartor accessorywhichprovestobe defective
withinthespecifictimeperiod.Anyreplacementpartor
accessoriesprovided inaccordancewiththiswarranty
will carryawarrantyfor the remainder ofthe period of
warrantyapplicabletothe partitreplaces. When repair
or replacementofpartor toolisrequired,the complete
toolor part(s)mustbe returned toPrimatechor atsuch
authorized warrantyservicepointofPrimatech,
transportationprepaid,withacopyofproofofpurchase
evidencing thatthe partor tooliswithinthe warranty
period.Serial#must be intact and legiblefor warranty
toapply.
Thiswarrantyisvoidastoanytoolwhichhasbeen
subjected tomisuse,abuse,accidentalor intentional
damage,used withfastenersnotmeeting Primatech
specifications, sizeor quality,improperlymaintained,
repaired withother than genuinePrimatech
replacementparts, damaged intransitor handling,or
which,inPrimatech‘ssoleopinion,hasbeen altered,
modified or repaired inawaythataffects or detracts
fromthe performanceof the tool.
PRIMATECHMAKESNOWARRANTY,EXPRESSED
ORIMPLIED,RELATINGTO MERCHANTABILITY,
FITNESS, OROTHERWISE, EXCEPTAS STATED
ABOVE, and Primatech‘sliabilityASSTATEDABOVE
AND AS ASSUMEDABOVEisinlieu ofall other
warrantiesarising outof, or inconnection with,the use
and performanceofthe tool,excepttothe extent
otherwiseprovided for byapplicablelaw.
PRIMATECH SHALL INNOEVENTBE LIABLE FOR
ANYDIRECT,INDIRECT,ORCONSEQUENTIAL
DAMAGES WHICH MAY ARISE FROMLOSS OF
ANTICIPATEDPROFITSORPRODUCTION,
SPOILAGEOF MATERIALS, INCREASEDCOSTOF
OPERATION,OROTHERWISE. Anyliability,ifany,
connected withthe useofthe toolshall terminateupon
the expiration of the warrantyperiod specified above.
