Rockler JIG IT 50713 Manuale utente

JIG IT®Undermount

Drilling Guide Instructions

Before attempting to install the locking devices, make

sure that the dimensions of your drawer box meet the

specifications in the instructions that came with your

Blum Tandem Drawer Slides. Also, as specified in the

instructions, cut notches in the back of the drawer box, at

the bottom, to accommodate the slides. Try to make the

notches as flush to the drawer bottom and square to the

sides as possible.

Set Depth Collars on Drill Bits

1. Slide the smaller depth collar on the 2.5mm drill bit and

insert the bit in the 2.5mm depth guide in the rounded

foot of the Drill Guide.

2. Allow the bit to bottom out in the hole and the stop

collar to rest on the Drill Guide. Secure the depth collar

by tightening the set screw with the included hex

wrench. Fig. 1.

3. Repeat Steps 1 and 2 for the 6mm bit, using the 6mm

depth guide in the Drill Guide. Fig. 1

Angled guide holes

for locking devices

Stop collar

depth guides

Pin guide holes

6mm drill bit

and stop collar

Hex wrench

2.5mm drill bits

with stop collar

2Distributed by Rockler Companies, Inc.

50713

Rev 10/15

Fig. 2

Fig. 3

Drill for the Locking Devices

1. With the drawer box upside down on a stable work

surface, position the Drilling Guide on the drawer

bottom in one of the front corners. Make sure the flat

foot is against the drawer side and the arrow points

to the side.

2. With the 2.5mm bit chucked in a handheld drill, hold

the Drill Guide in place and use the guide holes to drill

the angled holes for mounting the slide bracket. Fig. 2.

3. Flip the Drill Guide side-to-side and repeat Steps 1

and 2 in the other front bottom corner of the

drawer box.

Drill for the Slides’ Rear Pins

1. With the drawer box still upside down, place the Drill

Guide in one of the notches and against the drawer side.

Make sure the shoulder on the rounded foot of the

guide rests squarely on the bottom of the notch.

2. With the 6mm bit chucked in a handheld drill, hold the

Drill Guide in place and use the guide hole closest to

the drawer side to bore the hole for the rear pin

on the slide. Fig. 3.

3. Reposition the Drill Guide in the other notch and

repeat Steps 1 and 2, using the other guide hole in

the Drill Guide.

Check Rockler.com for updates. If you have further questions, please

contact our Technical Support Department at 1-800-260-9663

or support@rockler.com

Locking device

Indice

Altri manuali Rockler Utensili

Rockler

Rockler Dust RIGHT Manuale utente

Rockler

Rockler 43450 Istruzioni operative

Rockler

Rockler HPL Guida all'installazione

Rockler

Rockler 55391 Manuale utente

Rockler

Rockler 37375 Manuale utente

Rockler

Rockler 63779 Manuale utente

Rockler

Rockler 22818 Manuale utente

Rockler

Rockler 57484 Manuale utente

Rockler

Rockler Trim Router Table Manuale utente

Rockler

Rockler 36833 Manuale utente

Rockler

Rockler JIG IT Manuale utente

Rockler

Rockler 53418 Manuale utente

Rockler

Rockler JIG IT Manuale utente

Rockler

Rockler Dust Right 52542 Manuale utente

Rockler

Rockler 55512 Manuale utente

Rockler

Rockler Indexing Dado Manuale utente

Rockler

Rockler 311373 Manuale utente

Rockler

Rockler 53651 Manuale utente

Rockler

Rockler 59133 Manuale utente

Rockler

Rockler 51133 Manuale utente

Rockler

Rockler 68547 Manuale utente

Rockler

Rockler Interlock Signmaker's Script Font Template Manuale utente

Rockler

Rockler 45968 Istruzioni operative

Rockler

Rockler 56372 Manuale utente

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare