SIIG AV-GM0AK3-S1 Manuale utente
Dual-View Digital Signage Processor with
Audio Path
P/N: AV-GM0AK3-S1
Safety and Notice
The AV-GM0AK3-S1 Dual-View Digital Signage Processor with Audio Path has been tested for
conformity to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipments, the AV-GM0AK3-S1 should be used with care. Please
read and follow the safety instructions to protect yourself from possible injury and to minimize
the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on
a stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
Chapter 1
Introduction
General
Features
Specifications
Package Contents
Inputs and Outputs
Chapter 2
Hardware Installation
Safety Precautions
Installation Procedures
IR Remote Control
On Screen Display Menu
Chapter 3
Software Operation
System Requirement and Precautions
Instruction of Software Connection
Instruction of Software Operation
Chapter 4
Troubleshooting
Warranty
Appendix
Supported Resolution
Table of Contents
General
The AV-GM0AK3-S1 Dual-View Digital Signage Processor with Audio Path is an advanced
video processor with PC mother board built-in for digital signage applications. It is an ideal
solution for applications where two video signals must be displayed on a single display, one
from PC and the other from outside video source. It supports up to four video inputs, of which
two can be outputted simultaneously in Picture-In-Picture (PIP) or Picture-Aside-Picture (PAP)
modes. The AV-GM0AK3-S1 allows you to manipulate output images, wherever position and
whatever sizes you want for viewing two computers or two video signals or a combination. With
MB support, users can upload popular OS such as Win7 or Linux to get a link to unlimited
software and the instant Ethernet and USB support make AV-GM0AK3-S1 access all the possible
media content to enhance the presentation diversity.
The embedded scaler converts signals from input sources to match the native resolution of
monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA
(1920x1200). Dual outputs are provided in both analog (YPbPr) and digital (HDMI/DVI) format,
one is connected to remote display and the other is connected to on-site display for real time
monitoring or displaying.
Figure 1: Configuration Diagram
Introduction
Features
Built-in PC mother board Built-in
PC Ethernet/USB/….. support
Swappable hard disk tray to ease maintenance
Three graphic (DVI / VGA) and four video (HDMI /Component / S-Video / Composite) inputs
selections, from 640x480 to 1920x1200, interlaced or progressive.
Dual video outputs (DVI / HDMI), 640x480 to 1920x1200, and YPbPr, HD 720p.
HDCP 1.1 Support
HDMI 1.2a Support
PIP, PAP, Full screen modes and adjustable size& position through software.
Titles, borders and colored backgrounds.
Resize, position and blend output video.
Several Image parameters and layouts can be saved in flash memory and can be recalled for
later use.
Video parameters adjustable (brightness, contrast, color temperature, etc.).
User-selectable output settings, up to 1920x1200.
Perfectly as a video screen splitter, a video converter and a video switcher.
Analog audio switcher
Analog stereo to HDMI audio conversion
Firmware upgradable for support of new features and technology enhancements.
Software control through USB.
Specifications
Model Name
AV-GM0AK3-S1
Technical
Role of usage
Multiplexer / video processor
Dual output support
YES[HDMI/DVI + YPbPr]
HDCP compliance
Yes
Video bandwidth
DVI [Single-link 4.95Gbps]
VGA [165MHz]
Component [30MHz]
Composite [13.5MHz]
Video Input support
480i / 480p / 720p / 1080i / 1080p60 / 1920x1200 /
1600x1200@60
Audio support
Yes
PIP / PAP
Yes
Cascadable
Yes
Input TMDS signal
1.2 Volts [peak-to-peak]
ESD protection
Human body model —±19kV [air-gap discharge] & ±12kV
[contact discharge]
PCB stack-up
6-layer board [impedance control —differential 100; single
50]
Input
2x VGA + 1x DVI + 1x component +1x Mini-Din9 + 1x USB + 1 x
RL Audio
Output
1x DVI + 1x YPbPr + 1 x RL Audio
DVI connector
DVI-I [29-pin female, digital only]
VGA connector
HD-15 [15-pin D-sub female]
USB connector
Mini USB
RCA connector
75female
Mechanical
Housing
Metal case
Dimensions
(L x W x H)
Model
317 x 215 x 67mm [1'1" x 8.5" x 2.6"]
Package
528 x 155 x 320mm [1'9" x 6.1" x 1'1"]
Carton
543 x 335 x 344mm [1'9" x 1'1" x 1'2"]
Weight
Model
2.9 KG [6.4lbs]
Package
4.8 KG [10.6lbs]
Fixedness
Wall-mounting case or wall hanging holes upon request
Power supply
12V 5A DC
Power consumption
50 Watts [max]
Operation
temperature
0~40C [32~104F]
Storage temperature
-20~60C [-4~140F]
Relative humidity
20~90% RH [no condensation]
Package Contents
1. AV-GM0AK3-S1
2. DVI to DVI & VGA breakout cable(DDVY01)
3.VGA to component breakout cable (VYPBA01)
4. DVI to VGA adapter (DVA01)
5. 12V DC power adapter
6. Installation software CD
7. User Manual
8. VGA cable
9. 1x mini-Din9 to S-Video & CVBS breakout cable
Inputs and Outputs
The AV-GM0AK3-S1 has four inputs and accepts both graphics and video signals, which come
from computers and NTSC/PAL video sources respectively. There is a concept of main channel
and sub channel for this device. You can pick up two of the four inputs, one is for main channel
and the other is for sub channel, and then display two of them simultaneously on the same
screen. Figure 2 shows the rear panel connectors of a AV-GM0AK3-S1 and Table 1 illustrates how
you can connect video devices and display to the AV-GM0AK3-S1.
Figure 2: Panel
1.Power connector 4. S-Video/Composite input
2.Mother board 5. VGA input
3. DVI / VGA / Component input
*
Default: Turn on the AV-GM0AK3-S1 then switch both two DIP switches
simultaneously up and down to factory default mode.
*
These IO ports support various resolution from 640x480 up to 1920x1200, for more
detail of the supported modes, please refer to the Appendix –Supported
Resolution.
Table 1: I/O Connectors
Input Connector
Video Source
DVI-IN
[1] DVI
[2] VGA —with a DVI-to-VGA adapter (DVA01)
[3] Component (YPbPr) —with a DVI-to-VGA adapter (DVA01) and a
VGA-to-component breakout cable (VYPBA01)
[4] 1x DVI + 1x VGA —with a DVI-to-DVI/VGA breakout cable (DDVY01)
[5] 1x DVI + 1x Component (YPbPr) —with a DVI-to-DVI&VGA breakout cable
(DDVY01) and a VGA-to-component breakout cable (VYPBA01)
VGA IN 2
[1] VGA
Mini-Din 9
[1]1 x S-Video + 1x Composite
Audio IN
LR Audio
Output Connector
Display
DVI OUT
[1] HDMI/DVI display
YPbPr OUT
[1] Component display
Audio OUT
LR Audio
Indice
Altri manuali SIIG Hardware per computer
SIIG
SIIG 1-Port ECP Manuale utente
SIIG
SIIG SC-SAE312-S3 Manuale utente
SIIG
SIIG CyberParallel Dual Manuale utente
SIIG
SIIG Low Profile USB Adapter Manuale utente
SIIG
SIIG Network Device EVTEK-5103 Guida all'installazione
SIIG
SIIG NN-000032-S1 Manuale utente
SIIG
SIIG JU-PCM422-S2 Manuale utente
SIIG
SIIG JU-2NE012 Manuale utente
SIIG
SIIG PCIe to ExpressCard Bay Manuale utente
SIIG
SIIG ExpressCard/54 CF R/W Manuale utente
SIIG
SIIG IO1037 Manuale utente
SIIG
SIIG JU-EP0012-S1 Manuale utente
SIIG
SIIG Hi-Speed ExpressCard CF R/W Manuale utente
SIIG
SIIG SIIG 2-Port Serial 950-Value Manuale utente
SIIG
SIIG JU-91RW12-S4 Manuale utente
SIIG
SIIG SC-SAE512-S1 Manuale utente
SIIG
SIIG UltraATA 100 Pro Manuale utente
SIIG
SIIG DP SoundWave 4 Channel PCI Manuale utente
SIIG
SIIG I/O Expander 2S Manuale utente
SIIG
SIIG SATA II PCIe RAID Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
