SIIG JU-PCM422-S2 Manuale utente
1
Hi-Speed USB 4-Port CardBus
Quick Installation Guide
04-0255E
Introducing the Hi-Speed USB 4-Port
CardBus
The Hi-Speed USB 4-Port CardBus adds high-speed USB
2.0 interface to your notebook computer. A switching
power adapter is not required to provide standard power
output for each port. It supports high-speed (480 Mbps),
full-speed (12 Mbps), and low-speed (1.5 Mbps) data
transfer modes.
KeyFeaturesandBenefits
• Compliant with USB specifications revision 2.0
• PCMCIA Cardbus Interface with Power
Management
• Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
• Hot-swapping feature allows you to connect/
disconnect USB devices without first turning your
notebook computer off
• Works with a various type of USB 2.0 and USB 1.1
devices simultaneously including hubs, removable
drives, digital cameras, scanners, CD-RWs,
DVD-RAMs, PC video cameras, printers, CF/SM/
MMC/SD/MemoryStickmemorycardreaders,and
more
Note: USB 1.1 devices are limited to USB 1.1 speeds
evenwhentheyareconnectedtoUSB 2.0hostadapter
or USB 2.0 hubs.
2
SystemRequirements
PC
•Pentium or equivalent notebook computer with an
available CardBus Type II slot
•Windows®2000 SP4/XP (32-/64-bit)/Server 2003
(32-/64-bit)/Vista (32-/64-bit)
Mac
•Power Book G3 or later with an available CardBus
Type II slot
•Mac OS X v10.2.8 or later
PackageContents
•Hi-Speed USB 4-Port CardBus
•Quick installation guide
Hardware Installation
Note: A switching power adapter is not required to
provide standard power output for each port. Certain
high performance USB devices require extra power
output from the ports, an optional power adapter, with
an output of 5V DC, 2.0A and positive inside polarity,
can be used.
Important: Make sure the power supply is connected to
the Hi-Speed USB 4-Port CardBus before installing into
your notebook computer.
1. Power off your notebook computer and any other
connected peripheral devices.
3
2. Connect the optional switching power adapter to
the Hi-Speed USB 4-Port CardBus, then plug the
switching power adapter into an appropriate power
source.
3. Insert the PC Card into the Type II PC Card slot of
your notebook computer with its 68-pin connector
facing the slot. Make sure it is inserted all the way in
for a solid connection.
4. Power on your notebook computer.
Figure 1. Inserting the PC Card
Driver Installation
Windows
Windows 2000 SP4, XP, Server 2003 and Vista will detect
andinstallthedrivers automatically. Noadditional driver
is necessary.
4
ToVerifyWindowsDriverInstallation
1. Check Device Manager to verify successful driver
installation.
Windows 2000/XP/Server 2003: Right click My
Computer, click Manage, then click Device
Manager.
Windows Vista™: Right click Computer, click
Manage,click Continue,thenclickDeviceManager.
2. The drivers for this controller show up differently
under different versions of Windows. Please refer
to the correct Windows version to verify.
Windows 2000, XP, Server 2003
Under Universal Serial Bus controllers:
- NEC PCI to USB Enhanced Host Controller...
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub (USB 2.0 Root Hub in 2000)
- USB Root Hub
- USB Root Hub
Windows Vista™
Under Universal Serial Bus controllers:
- Standard Enhanced PCI to USB...
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub
- USB Root Hub
- USB Root Hub
5
Mac OS (v10.2.8) or later
Mac OS X have built-in driver support for this controller.
Just install the board and Mac OS will automatically
detect and install the correct drivers for it. No additional
driver is necessary.
To Verify Mac OS Driver Installation
Mac OS X (v10.2.8) or later:
Since we didn't load any additional driver under
these Mac OSs, the only way to verify the board
works is actually connecting devices to the USB
ports.
6
Blank Page
7
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisitour
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyour questions could bejust a few clicks away. Youcan also submit
questions online and a technical support analysts will promptly
respond.
SIIGoffersalifetimemanufacturerwarrantywiththisproduct. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyour purchase has passedthe store's returnpolicy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued. SIIG RMA department
can also be reached at (510) 413-5333.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Hi-Speed USB 4-Port CardBus is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of
Microsoft Corporation. Mac and Mac OS are trademarks of Apple Computer. Pentium is a registered
trademark of Intel Corporation. Other names used in this publication are for identification only and
maybetrademarksoftheirrespectivecompanies.
October, 2007 Copyright © 2007 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
networking, sound cards, and other accessories. SIIG is the premier
one-stop source of upgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK, and through e-commerce sites.
PRODUCT NAME
Hi-Speed USB 4-Port CardBus
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Indice
Altri manuali SIIG Hardware per computer
SIIG
SIIG CyberSerial POS 4000RJ Manuale utente
SIIG
SIIG eSATA II PCIe i/e Manuale utente
SIIG
SIIG NN-EC2812-S1 Manuale utente
SIIG
SIIG UltraATA 133 PCI Manuale utente
SIIG
SIIG AV-GM0AK3-S1 Manuale utente
SIIG
SIIG JU-P40311-S1 Manuale utente
SIIG
SIIG DP PCI-to-PS/2 Manuale utente
SIIG
SIIG DP FireWire 800 PCIe Manuale utente
SIIG
SIIG JJ-EC2011-S1 Manuale utente
SIIG
SIIG JU-91RW12-S4 Manuale utente
SIIG
SIIG CE-ED0011-S1 Manuale utente
SIIG
SIIG 1 FireWire 800 CardBus DV-Ki Manuale utente
SIIG
SIIG SIIG 2-Port Serial 950-Value Manuale utente
SIIG
SIIG JJ-E02211-S1 Manuale utente
SIIG
SIIG 1394 Dual-Port CardBus Manuale utente
SIIG
SIIG ID-P40411-S1 Manuale utente
SIIG
SIIG NN-8CB212-S1 Manuale utente
SIIG
SIIG eSATA II ExpressCard Manuale utente
SIIG
SIIG Parallel PCI 1P Manuale utente
SIIG
SIIG DP FireWire 800 3-Port PCIe Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
