Soundcore Motion 300 Manuale utente
At a Glance
Charging Your Speaker
• Use a certified USB-C cable and charger to prevent any damage.
• Fully charge this speaker before the first use to prolong the lifespan of the
built-in battery.
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Volume Down Button
Multi-Function Button
Volume Up Button
USB-C Charing Port
Detachable Strap
Power Button
Bluetooth Button
BassUp Button
Powering On / Off
Press Power On
Steady White
Press and Hold for 2 Seconds Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select
"soundcore Motion 300" from the Bluetooth list to connect.
Motion 300
Press Enter Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from
another connected device, pause the device that's currently active first.
• Each time you power on your speaker, it will automatically connect to your
last connected device if available within the Bluetooth range. If not, press the
Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers can pair with each other for stereo sound. Both
speakers can play the same audio (one as the left channel and the other as the
right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth
button for 2 seconds on two speakers to enter TWS pairing mode.
Press and Hold for 2 Seconds Enter / Exit TWS Mode
Flashing White TWS Pairing
Steady Blue (Speaker 1) TWS Connected
Steady White (Speaker 2)
LDAC
Use devices powered by Android 8.0 or later to experience LDAC quality sound.
In the soundcore app, tap the Settings icon > "Sound Mode" > "Preferred audio
quality".
1
2
3
4
• It takes about 10 seconds to switch audio codecs. You may be requested to
update the speaker's firmware if available.
• LDAC provides higher quality sound, increases power consumption, and
reduces playtime.
• Enable LDAC in a low-interference environment to ensure a stable Bluetooth
connection.
Button Controls
Press Power On
Press and Hold for 2 Seconds Power Off
Press Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit TWS Pairing Mode
Press Turn BassUp On / Off
Press Volume Up / Down
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press Answer / End a Call
Press and Hold for 2 Seconds Reject a Call
Press and Hold for 2 Seconds Activate Voice Assistant Software
Auto Adaptive EQ
This speaker can automatically adjust the EQ in response to different placements.
• Vertical: Immersive Mode
• Horizontal: 360° Mode
• Handheld Vertical: Dynamic Mode
Immersive Mode 360° Mode Dynamic Mode
soundcore App
Download the soundcore app to enhance your experience.
soundcore
Apple and the Apple logo are trademarks of
Apple Inc.
Google Play and the Google Play
logo are
trademarks of Google Inc.
Product information: Check the product name and software version, or read the
user guide.
Firmware update: You will be informed once a new version of firmware is
detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons
on the speaker.
EQ settings: There are various preset EQ settings you can choose from in the app
to optimize your experience while enjoying different music genres.
• soundcore Signature: Standard EQ mode optimized for well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Treble Boost: High frequencies are enhanced.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• Custom: Customize the EQ setting to suit you in the app.
• BassUp: Turn on BassUp to enhance the low-frequency sound.
Set auto-power off time: Set an auto-power off time. The speaker will automatically
turn off when the time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at
least 4 seconds to reset the speaker.
Specifications
Specifications are subject to change without notice.
DC Power Input 5V 3A
Battery Capacity 4900mAh/7.4V
Audio Output Power 30W
Speaker Driver 48mm x2
Charging Time < 4 Hours
Play Time (varies by volume level and
music content) Up to 12 Hours
Waterproof Level IPX7
Bluetooth Version 5.3
Bluetooth Range 100m / 328ft
Altri manuali per Motion 300
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Soundcore Altoparlanti
Soundcore
Soundcore Flare 2 Manuale utente
Soundcore
Soundcore Zero Manuale utente
Soundcore
Soundcore Icon Mini Manuale utente
Soundcore
Soundcore Rave Neo Manuale utente
Soundcore
Soundcore Rave Plus Manuale utente
Soundcore
Soundcore Flare 2 Manuale utente
Soundcore
Soundcore Strike 3 Manuale utente
Soundcore
Soundcore Icon Manuale utente
Soundcore
Soundcore Select Pro A3126 Manuale utente
Soundcore
Soundcore A3399 Manuale utente
Soundcore
Soundcore Mini 3 Pro Manuale utente
Soundcore
Soundcore Motion X500 Manuale utente
Soundcore
Soundcore Wakey Manuale utente
Soundcore
Soundcore A3391Z12 Manuale utente
Soundcore
Soundcore Icon+ A3123 Manuale utente
Soundcore
Soundcore Rave Neo 2 Manuale utente
Soundcore
Soundcore A3371 Manuale utente
Soundcore
Soundcore Infini Manuale utente
Soundcore
Soundcore Motion B Manuale utente
Soundcore
Soundcore Soundcore Motion Boom Manuale utente
