Sper scientific 840046 Manuale utente

Microwave Meter

840046

Instruction Manual

- 2 -

Microwave Meter 840046

Printed in the USA

The contents of this manual may not be

reproduced or transmitted in any form or

by any means electronic, mechanical, or

other means that do not yet exist or may be

developed, including photocopying, recording,

or any information storage and retrieval

system without the express permission from

Sper Scientific.

- 3 -

TABLE OF CONTENTS

INTRODUCTION. . . . . . . . . . . . . . .

FEATURES . . . . . . . . . . . . . . . . . . .

MATERIALS SUPPLIED. . . . . . . . .

KEYPAD. . . . . . . . . . . . . . . . . . . . . .

MEASUREMENT PROCEDURES. .

BATTERY REPLACEMENT. . . . . . .

MAINTENANCE. . . . . . . . . . . . . . . .

OPTIONAL ACCESSORIES. . . . . .

SPECIFICATIONS. . . . . . . . . . . . . .

WARRANTY . . . . . . . . . . . . . . . . . .

- 4 -

INTRODUCTION

Measure hazardous microwave

oven leakage

With use microwave oven door

seals may wear enabling hazardous

microwaves to leak out. Sper Scientific

Microwave Meter is calibrated at

2.45 GHZ, the precise frequency of

microwave ovens to accurately

measure the intensity of such micro-

wave leakage. Features maximum

and minimum hold, an audible alarm,

and a zero adjustment to eliminate

background EMF. The display also

indicates overload and low battery.

Comes with a soft carrying case and

standard 9V battery, which provides

approximately 100 hours of use.

- 5 -

FEATURES

 Frequency selection of normal

or microwave range

 Tripod mounting socket

 Maximum and minimum

 Hold function

 Auto-power-off

 Built-in alarm

 Zero offset adjustment

 Overload indicator

 Low battery indicator

- 6 -

MATERIALS SUPPLIED

 Meter

 9 Volt Battery

 Instruction Manual

 Soft Carrying Case

- 7 -

KEYPAD

1. Sensor position

2. LCD

3. Zero button

4. Power on/off

5. Maximum/minimum button

6. Frequency range selection button

7. Data hold button

8. Tripod mounting socket

9. Battery cover

MEASUREMENT PROCEDURES

1. Press POWER to turn the meter on.

2. Press FREQ. RANGE to select

microwave (2.45 GHZ) or RF (50

MHZ to 3.5 GHZ). When 2.45 GHZ

is selected, “2450 MHZ” will appear

on the lower right corner of the LCD.

When normal range is selected,

“2450 MHZ” will disappear from the

lower right corner of the display.

3. For general information on

microwave oven leakage and

instructions on preparing for

microwave measurement,

see page 14.

4. Position the top of the meter to

measure the electromagnetic waves.

Adjust the measurement angle or

position until the highest reading

is obtained.

- 8 -

- 9 -

Measurement Position

Figure 1 shows the correct

measurement position of

RF electromagnetic field

strength.

Figure 2 shows the

incorrect measurement

positions of RF

electromagnetic field

strength.

MEASUREMENT PROCEDURES

Figure 1

Figure 2

- 10 -

Note…

Due to background environmental

magnetic fields, this meter may display

a reading value under 0.002 mW/cm2

prior to measuring.

Maximum, Minimum and Hold

1. Press MAX/MIN to retain the maxi-

mum value. “MAX” will appear on

the LCD. The meter will continue

measuring, holding the maximum

value on the LCD until exceeded.

2. Press MAX/MIN again to retain the

minimum value. “MIN” will appear

on the LCD. The meter will continue

measuring, holding the minimum

value on the LCD until exceeded.

3. Press MAX/MIN again to retain the

maximum and minimum values

simultaneously. “MAX MIN” will

MEASUREMENT PROCEDURES

Indice

Altri manuali Sper scientific Strumento di misura

Sper scientific

Sper scientific 850081 Manuale utente

Sper scientific

Sper scientific 840065 Manuale utente

Sper scientific

Sper scientific 840018 Manuale utente

Sper scientific

Sper scientific 800052 Manuale utente

Sper scientific

Sper scientific 300005 Manuale utente

Sper scientific

Sper scientific 850023 Manuale utente

Sper scientific

Sper scientific 850039 Manuale utente

Sper scientific

Sper scientific 850009 Manuale utente

Sper scientific

Sper scientific 850068 Manuale utente

Sper scientific

Sper scientific 840087 Manuale utente

Sper scientific

Sper scientific 840005 Manuale utente

Sper scientific

Sper scientific 850009 Manuale utente

Sper scientific

Sper scientific 840010 Manuale utente

Sper scientific

Sper scientific 300003 Manuale utente

Sper scientific

Sper scientific 840024 Manuale utente

Sper scientific

Sper scientific 850070 Manuale utente

Sper scientific

Sper scientific 840045 Manuale utente

Sper scientific

Sper scientific 860043 Manuale utente

Sper scientific

Sper scientific 840020 Manuale utente

Sper scientific

Sper scientific 850069 Manuale utente

Sper scientific

Sper scientific 300001 Manuale utente

Sper scientific

Sper scientific 840007 Manuale utente

Sper scientific

Sper scientific 900019 Manuale utente

Sper scientific

Sper scientific 300107 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente