STONEX R80 Manuale utente

STONEX R80

Robotic Total Station

User Manual

(October 2019)-Ver.1-Rev.1- Firmware Version V3.0.1.0 150228 www.stonex.it

 
Stonex R80 Robotic Total Station - User Manual 2
Contents 
Precautions for safety ......................................................................................................................................3 
1. Note ..............................................................................................................................................................................................................3 
2. Definition of indication .........................................................................................................................................................................4 
3. Safety standards for laser ....................................................................................................................................................................5 
4. About user..................................................................................................................................................................................................6 
5. Exceptions from responsibility...........................................................................................................................................................6 
Nomenclature....................................................................................................................................................7 
1. Parts of the instrument .........................................................................................................................................................................7 
2. Keyboard.....................................................................................................................................................................................................9 
Preparation before measurement ................................................................................................................10 
1. Power on/off........................................................................................................................................................................................... 10 
2. About battery......................................................................................................................................................................................... 10 
3. Setting up the instrument................................................................................................................................................................. 11 
4. Centering and levelling-up............................................................................................................................................................... 13 
5. Assembling and disassembling for three-jaws tribrach....................................................................................................... 15 
Basic functions ................................................................................................................................................16 
1. Comprehensive understanding ...................................................................................................................................................... 16 
2. BSC Measure screen introduction................................................................................................................................................. 18 
3. Shortcut key............................................................................................................................................................................................ 21 
4. System information ............................................................................................................................................................................. 22 
5. How to input number and alphabet ............................................................................................................................................ 22 
Instrument settings ........................................................................................................................................24 
1. Touch screen calibration ................................................................................................................................................................... 24 
2. INST Setup............................................................................................................................................................................................... 25 
3. Star settings............................................................................................................................................................................................ 29 
4. Setup parameters................................................................................................................................................................................. 32 
Measurement...................................................................................................................................................33 
1. Angle measurement............................................................................................................................................................................ 33 
2. Distance measurement ...................................................................................................................................................................... 39 
3. Coordinate measurement................................................................................................................................................................. 43 
Data management ..........................................................................................................................................57 
1. USB cable................................................................................................................................................................................................. 57 
2. USB dongle connection ..................................................................................................................................................................... 57 
Check and adjustment....................................................................................................................................59 
1. The instrument constant ................................................................................................................................................................... 59 
2. Plate level................................................................................................................................................................................................. 60 
3. Circular level ........................................................................................................................................................................................... 60 
4. The optical sight ................................................................................................................................................................................... 61 
5. Laser plummet....................................................................................................................................................................................... 61 
6. Vertical cross-hair on telescope..................................................................................................................................................... 62 
7. EDM optical axis and the telescope sighting axis error ....................................................................................................... 63 
Technical features...........................................................................................................................................64 
Kit components...............................................................................................................................................65 
Appendix I: Atmospheric correction formula and chart ........................................................................................66 
Appendix II: Correction for refraction and earth curvature ..................................................................................68 
Appendix III: Technical drawing ................................................................................................................................69 
Limited warranty standard .........................................................................................................................................70 
Environmental recycling .............................................................................................................................................71 
 
 

Stonex R80 Robotic Total Station - User Manual 3

1. Precautions for safety

1.1. Note

Don’t collimate the sun directly

Avoid insolating the instrument, and don’t collimate the sun directly for protecting eyes and instrument.

Avoid the vibrations on the instrument

When transporting, keep the instrument in the case and try your best to lighten vibrations.

Carry the instrument

When carrying, the instrument handle must be hold tight.

Check the battery power

Before using it, you should check the power whether it is enough.

Battery maintenance

If the instrument is not used for a long time, the battery should be taken out from the instrument and stored in

separate place. Meantime, the battery should be charged every month.

Take out the battery

It is not suggested to take out the battery when the instrument is on, otherwise, the stored data may be lost, so it

is better to replace the battery after power off the instrument.

Set up the instrument on the tripod

When using it please insure the connection between tripod and instrument is firm. It is better to work with

wooden tripod for the measurement accuracy.

Assemble the tribrach on the instrument

The setting of tribrach would influence the accuracy. The tribrach should be check frequently, the screw which

connects the tribrach and alidade must be locked tightly. And the central fixing screw should be tight.

High temperature condition

Don’t put the instrument in high temperature condition for a long time, it is bad for the instrument performance.

Temperature changing sharply

The sharp temperature changing on the instrument or prism will shorten the distance measurement range, for

example, after taking the instrument out from a warm car to a cold condition, wait for some time, it can be used

when it adapts the surrounding condition.

The noise from the instrument

When the instrument working, it is normal if you hear the noise from instrument motor, it will not affect the

instrument work.

Stored data responsibility

Stonex R80 Robotic Total Station - User Manual 4

STONEX should not be held liable for the lost data because of wrong operation.

The noise from the instrument

When the instrument is working, it is normal if you hear the noise from instrument motor, it will not affect the

instrument work.

1.2. Definition of indication

For the safe of your product and prevention of injury to operators and other persons as well as prevention of

property damage, items which should be observed are indicated by an exclamation point within a triangle used

with WARNING and CAUTION statements in this manual.

The definitions of the indication are listed below. Be sure you understand them before reading the manual’s main

text.

WARNING:

Ignoring this indication and making an operation error

could possibly result in death or serious injury to the

operator.

CAUTION:

Ignoring this indication and making an operation error

could possibly result in death or serious injury to the

operator.

WARNING:

•Only STONEX authorized distributors can disassemble or rebuilt the instrument.

•Do not collimate the sun directly. The eye injury or blind could result.

•Cover the charger maybe result fire when charging.

•If use defection power cable, socket or plug, there is danger of fire, or electronic shock.

•Using wet battery or charger maybe result fire, or electronic shock.

•Do not close the instrument to burning gas or liquid, and do not use the instrument in coal mine.

Blast could be result.

•Do not put the battery in the fire or high temperature condition. Explosion, damage could result.

•If use the battery which is not specified by STONEX, there is a danger of fire, electric shock or burn.

•If use the power cable which is not specified by STONEX, there is a danger of fire.

•If short circuit of the battery, there is a danger of fire.

•When this product encounters disturbance of severe Electrostatic Discharge, perhaps it will have

some degradation of performance like switching on/off automatically and so on.

Stonex R80 Robotic Total Station - User Manual 5

CAUTION:

•If touch the instrument with wet hand, there is danger of electric shock.

•Stand or seat on the carrying case, or turn over the carrying case arbitrarily, the instrument maybe

damaged.

•Be careful of the tripod tiptoe when setup or move it.

•Drop the instrument or the carrying case, or use defective belt, agraffe or hinge, instrument damage

could result.

•Do not touch liquid leaking from the instrument or battery. Harmful chemicals could cause burn or

blisters.

•Please assemble the tribrach carefully, if the tribrach is not stable, series damage could result.

•Drop the instrument or tripod, series damage could result. Before use it, check the central screw is

tight.

1.3. Safety standards for laser

R80 series adopts the safe and visible laser based on “Specification Standard of radiant products” (FDA

CDRH.21CFR Part 1040.10 and 1040.11) and “Safety of laser products – parts 1: Equipment classification,

requirements and user’s guide” (IEC 60825-1:2001).

According to above standards, R80 Series is class ⅢA/3R laser products. When the prism or reflective sheet is

selected in Config mode as target, the output is equivalent to the safer class 1.

Once the instrument is damaged, do not disassemble it. You’d better contact STONEX or local dealer.

Laser emitter

Stonex R80 Robotic Total Station - User Manual 6

NOTE FOR SAFETY:

WARNING

•Never point the laser beam at other’s eyes, it could cause serious injury.

•Never look directly into the laser beam source, it could cause permanent eye damage.

•Never stare at the laser beam, it could cause permanent eye damage.

•Never look at the laser beam through a telescope or other optical devices, it could

cause permanent eye damage.

1.4. About user

1) This product is for professional user only

The user is required to be a qualified surveyor or have a good knowledge of surveying, in order to

understand the user manual and safety instructions, before operating, inspecting or adjusting.

2) Wear the required protectors (safety shoes, helmet, etc.) when operating.

1.5. Exceptions from responsibility

•The user of this product is expected to follow all operating instructions and make periodic checks of the

product’s performance.

•The manufacturer assumes no responsibility for results of a faulty or intentional usage or misuse

including any direct, indirect, consequential damage, and loss of profits.

•The manufacturer assumes no responsibility for consequential damage, and loss of profits by any

disaster, (an earthquake, storms, floods etc.).

•The manufacturer assumes no responsibility for any damage, and loss of profits due to a change of data,

loss of data, an interruption of business etc., caused by using the product or an unusable product.

•The manufacturer assumes no responsibility for any damage, and loss of profits caused by usage except

for explained in the user manual.

•The manufacturer assumes no responsibility for damage caused by wrong transport, or action due to

connecting with other products.

Stonex R80 Robotic Total Station - User Manual 7

2. Nomenclature

2.1. Parts of the instrument

Handle

Display

Tribrach

Battery

Keypad

Antenna for long

range Bluetooth

Instrument

model

USB port

Serial number

Touch pen

Stonex R80 Robotic Total Station - User Manual 8

Instrument

height mark

Objective

Leveling screw

Guide light

Vertical motion

screw

Horizontal motion

screw

Tribrach clamp

Optical sigh

Handle screw

Stonex R80 Robotic Total Station - User Manual 9

2.2. Keyboard

R80 series is equipped with two color touch screens and alphanumeric keypad, operation by both touching screen

and pressing keyboard is possible.

Do not touch the screen with ball-pen, pencil or other sharp thing to avoid damage on instrument.

Keys

Name

Functions

0~9/ A~!

Alphanumeric keypad

Enter text and numerical values.

Shift key for character entry

The current entry method can shift among number, smaller

letter and capital letter.

★

Star key

Normal configurations can be set here

B.S

Back Space key

Move the cursor left and delete one character

S.P

Space key

Enter the space

ENT

Enter key

Confirm an entry or selection

ESC

Escape key

Quit a screen or edit mode without saving changes. Return

to next higher level

SFT

Shift key

Perform variable functions defined by program screen

FNC

Function key

Perform variable functions defined by program screen

◄▲▼►

Navigation key

Control the focus bar within the screen and the entry bar

within a field

Power key

Turn on/off the instrument

F1-F8

Function keys

Refer to 5.2.6. Key settings to assign functions to these keys

Stonex R80 Robotic Total Station - User Manual 10

3. Preparation before measurement

3.1. Power on/off

To power on the instrument, press the [ ] key. The screen will

go to the “Welcome Interface”which is shown right.

To power off the instrument, at any interface, press [ESC] key to

return the “Welcome interface” screen. Then click on “Exit”, a

message will ask you if turn off: confirm selecting “Yes”.

3.2. About battery

3.2.1. Battery power indicator

At any screen interface, press [★] key to open fast setting menu.

Select Battery, battery level will be seen following Battery Level.

NOTE:

•The battery’s working time will be affected by many factors, such as ambient temperature, recharging time,

recharging and discharging times. So, we suggest the users to fully recharge the battery or prepare several

full batteries before operation.

•The battery symbol only indicates power capability for current measurement mode. The power consumption

in distance measurement mode is more than in angle mode, if the instrument enters distance measurement

mode from angle mode, the power maybe auto-off because of lower battery.

•The symbol only indicates the supply power but not the instantaneous power change. And if the

measurement mode changes, the symbol will not show the power’s decrease or increase immediately.

•It is suggested that user should check every battery power before field work

Altri manuali per R80

Indice

Altri manuali STONEX Strumento di misura

STONEX

STONEX R1 PLUS Manuale utente

STONEX

STONEX R6 Series Manuale utente

STONEX

STONEX R2 Manuale utente

STONEX

STONEX SPL1 Manuale utente

STONEX

STONEX R180 Manuale utente

STONEX

STONEX R80 Manuale utente

STONEX

STONEX R2 PLUS Manuale utente

STONEX

STONEX R25LR Manuale utente

STONEX

STONEX R20 Manuale utente

STONEX

STONEX R60 Manuale utente

STONEX

STONEX R2W PLUS 500 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente