STONEX SPL1 Manuale utente
PIPE LASER
STONEX SPL1
EN Operating Instruction
2EN Imprint
Version:
STONEX SPL 1
063338_26.10.2022
Copyright:
Stonex USA
54 Regional Dr. #1
Concord, N.H. 03301
www.stonexamerica.com
Transmission, reproduction and use of this document or
its contents are prohibited unless expressly permitted in
writing. Oenders will be liable for damages. All rights
reserved, especially those created by the granting of a
patent, utility model or registered design.
These operating instructions have been drawn up with due
care. However, STONEX does not accept any liability for
possible errors in these operating instructions and their
consequences. Equally, it does not accept any liability
for direct losses or consequential losses resulting from
improper use of the laser.
The specic national safety regulations and health &
safety provisions as well as the specications in these
operating instructions must be noted and complied with
when using the laser.
All product and brand names used are the property of the
holder and are not explicitly labelled as such.
Contents subject to change without notice.
3EN Contents
1 About these Operating Instructions
1.1 Symbols used in these operating instructions...................................4
2 Safety Information
2.1 Documentation .................................................................................5
2.2 Laser radiation ..................................................................................5
2.3 Power supply safety instructions ......................................................6
2.4 General safety instructions ...............................................................7
2.5 Intended use......................................................................................7
2.6 Transport and storage .......................................................................7
2.7 Repair and service ............................................................................7
2.8 The environment...............................................................................7
2.9 Conformity assessments ...................................................................8
3 Description of the STONEX SPL1
3.1 General product description .............................................................9
3.2 Scope of delivery..............................................................................9
3.3 How it works ....................................................................................9
3.4 Structure of the unit ........................................................................10
3.5 Technical data ................................................................................. 11
4 STONEX SPL1 Initial Startup
4.1 Charging the battery .......................................................................12
5 STONEX SPL1 Controls
5.1 Buttons of the STONEX SPL1 control panel.................................13
5.2 STONEX SPL1 displays ................................................................13
5.3 STONEX SPL1 + RC display and button functions ......................14
5.4 Buttons of the STONEX SPL1 remote control panel ....................15
5.5 Additional displays of the STONEX SPL1 remote control............15
5.6 Additional button functions of the STONEX SPL1 remote control16
6 STONEX SPL1 Startup
6.1 Switching on the STONEX SPL1 pipe laser..................................16
6.2 Aligning the STONEX SPL1 pipe laser .........................................16
7 Adjusting the Tilt
7.1 Adjusting the tilt in automatic mode ..............................................17
7.2 Plumb function ...............................................................................17
7.3 Measuring and accepting the tilt.....................................................18
7.4 Adjusting the laser direction...........................................................18
8 Unit Settings
8.1 Button functions in the unit menu ..................................................19
8.2 Unit menu .......................................................................................20
9 Info Displays and Warnings
9.1 Displays in the control panel display..............................................21
9.2 Acoustic warning signal .................................................................22
9.3 Warnings of the laser beam.............................................................22
4EN
These operating instructions contain all important information for handling
the STONEX SPL1 pipe laser. Operation, maintenance and care of the laser
as well as the warnings and error messages are also described.
• Do not use the STONEX SPL1 pipe laser until you have completely read
and understood these operating instructions.
• Keep these operating instructions together with the STONEX SPL1 pipe
laser at all times.
• In these operating instructions the STONEX SPL1 pipe laser is also re-
ferred to as the “Laser”.
1.1 Symbols used in these operating instructions
Compliance with the safety instructions and warnings is the basic requirement
for safe use of the STONEX SPL1 pipe laser. The various instructions and
warnings are labelled with corresponding symbols.
WARNING!
This pictogram with the word "WARNING!" indicates an imminent danger, which could
result in severe physical injuries if it is not avoided.
fThis arrow indicates the appropriate measure to prevent the imminent danger.
CAUTION!
This pictogram with the word „CAUTION!“ indicates an imminent danger, which could
result in slight or moderate physical injuries or property damage if it is not avoided.
fThis arrow indicates the appropriate measure to prevent the imminent danger.
NOTE
This „Note“ pictogram provides tips, recommendations and important information on
use and handling of the laser.
In addition, the standard symbols are used in the appropriate places in these
operating instructions.
1 About these operating instructions
General Notes
5EN
2 Safety information
Safety instructions
2.1 Documentation
Compliance with the following safety instructions and the specic national safety regu-
lations and health & safety provisions is a basic requirement for trouble-free and safe
use of the laser. Therefore, please read carefully through these operating instructions
and all notes and follow them while working with the laser.
2.2 Laser radiation
The STONEX SPL 1 pipe laser is a Class 3R laser product in accordance with
EN 60825-1:2014.
LASER RADIATION
AVOID DIRECT
EYE EXPOSURE!
LASER CLASS 3R
EN 60825-1:2014
P ≤ 5 mW
λ: 630-680 nm
φ ≤ 1.5 mrad
General safety instructions for handling laser radiation
WARNING!
fLaser radiation can damage the eyes.
fPrevent direct eye exposure to the beam.
fDo not direct the beam at other people/animals or into public areas.
fTo prevent reections, do not point the laser at reective surfaces.
fIf possible, do not operate the laser at eye level.
fThe housing of the laser may be opened by trained service technicians only.
The emitted laser radiation has the following properties:
• Class 3R Power P ≤5mW
• Wavelength λ: 515 nm
• Beam divergence φ ≤ 0,3 mrad
Signage
WARNING!
fWarning signs on the laser are for your safety.
fNever remove the warning signs!
NOTE
For users in Germany:
Please note and follow the regulations of the body responsible for industrial safety and
insurance (Berufsgenossenschaft) BGI 832 on the operation of laser equipment and
BGV B2 on accident prevention. We recommend registering operation of a class 3R
laser with the relevant Berufsgenossenschaft. Information can be found in §5 of BGV
B2 and section 2 - Annex 5 of BGI 832.
6EN
Laser warning Laser exit openings
Type label
2.3 Power supply safety instructions
WARNING!
Destruction! Explosion risk!
fUse charger included in the scope of delivery only.
fUse the charger in dry rooms only.
fNever expose the units to heat or re.
fCheck live components regularly and stop using them if they are damaged.
CAUTION!
Damage!
fIn case of lengthy storage, it may be necessary to charge and discharge the units
several times to reach the maximum output.
fIn case of storage for longer than 3 months, the units must be charged every 3
months.
NOTE
fOperation at ambient temperatures below 0° C leads to lower battery capacity.
Safety instructions
7EN
2.4 General safety instructions
CAUTION!
Damage!
fDo not open the units.
fDo not modify or change the units.
fDo not use the units in case of obvious damage or defects.
fDo not charge the units in a wet environment.
fOnly use accessories that have been explicitly approved by STONEX.
fDo not use the units as a climbing aid for people or machines.
2.5 Intended use
The STONEX SPL1 pipe laser is suitable for measuring tilts and alignments
in pipes and sewers. The unit is submersible (IP68). The unit can be operated
with a radio remote control or alternatively via infrared.
2.6 Transport and storage
The laser is a sensitive, high-precision instrument and must be handled with
appropriate care. Always transport and store the laser and the accessories in
the transportation case. Note the storage temperature given in the technical
data.
NOTE
fNever store the units in the case if the units are wet.
2.7 Repair and service
Repairs may only be carried out by STONEX or an authorised customer ser-
vice agent. Never open the units yourself, doing so cancels the warranty. Send
the units to STONEX for repair or checking. Always send the laser together
with the complete accessories in the original case and with completed repair
form.
2.8 The environment
Product-specic information on disposal of the laser can be downloaded from www.
stonexamerica.com. Batteries and rechargeable batteries are hazardous waste and may
not be placed in the domestic waste. They must be properly disposed of according to the
respective national guidelines
Safety instructions
8EN
FCC note
This unit has been tested and conforms with the limits for a Class A digital
device in accordance with Part 15 of the FCC Rules. These limits should
provide appropriate protection against harmful interference, if the device is
operated in a commercial, industrial or business environment. This device
generates, uses and radiates potentially high-frequency energy, and if it is not
installed and used in accordance with the operating instructions, it can cause
radio disturbance. Operation of this device in residential areas can cause
harmful disturbance and faults. In this case the user must correct the
disturbance and faults at their own cost.
2.9 Conformity assessments
Safety instructions
9EN Operating Instructions
3.2 How it works STONEX SPL1
The STONEX SPL1 pipe laser emits a laser beam, which can be tilted within
a range from -15% to +40%. It can also be swung to the side by +/-10° for
precise alignment of the beam onto a target board. The STONEX SPL1 pipe
laser is equipped with a self-levelling feature and levels out tilted positioning
of the unit within a range of -15% to +40%.
3 Description of the STONEX SPL1
3.1 General product description
The STONEX SPL1 is a fully automatic laser, which has been developed for
use in pipe and sewer constructions. The STONEX SPL1 can be used to sur-
vey or measure and lay pipe systems quickly and easily. The innovative shock
protection system and the robust, water and dust protected housing protect the
laser. The laser can also be monitored and controlled from a distance using
the remote control with integrated display. A Li-ion rechargeable battery in
the laser and the remote control ensures a long operating time.
1 Transportation case
2 Tool
3 STONEX SPL1 pipe laser
4 Remote control
5 Charger
6 Operating Instructions
7 Adapter cable
8 Target board with disc
9 Adjustable feet, dierent
lengths
3.3 Specications
10 EN Operating Instructions
STONEX SPL1 remote control
1 IR-LED outlet window
2 OLED-Display
3 Control panel with rubber keypad
4 Charging socket with cover
5 Hand loop
3.4 Device components
STONEX SPL1 pipe laser
1 LED for signalling the laser axis of
rotation
2 OLED display
3 Control panel with rubber keypad
4 Handle, rubberised
5 Adjustable feet for pipe (Ø 150mm,
200mm, 250mm, 300mm)
6 Laser
7 Rubber protector
8 Sliding roller (pipe slider)
9 Charging socket with cover
10 5/8” connection thread
11 M8 thread for adjustable foot
(three-point support)
Indice
Altri manuali STONEX Strumento di misura
STONEX
STONEX R25LR Manuale utente
STONEX
STONEX R180 Manuale utente
STONEX
STONEX R20 Manuale utente
STONEX
STONEX R80 Manuale utente
STONEX
STONEX R2 Manuale utente
STONEX
STONEX R2 PLUS Manuale utente
STONEX
STONEX R60 Manuale utente
STONEX
STONEX R1 PLUS Manuale utente
STONEX
STONEX R80 Manuale utente
STONEX
STONEX R6 Series Manuale utente
