Terex HP-32 Manuale utente
Operator’s Manual
HP-32
First Edition
First Printing
Part No. 216062
Serial Number Range
From 196379
with
Maintenance
Information
ANSI
North America
South America
HP-35
Operator's Manual First Edition • First Printing
Part No.216062
Copyright © 2012 by Terex Hydra Platforms Inc.
First Edition: First Printing, June 2012
These machines comply with
ANSI/SIA A92.8
Printed in U.S.A.
Table of Contents
Page
Introduction ................................................................ 1
Symbol and Hazard Pictorials Definitions ................... 5
General Safety ........................................................... 7
Personal Safety ........................................................ 14
Work Area Safety...................................................... 15
Legend ...................................................................... 24
Controls .................................................................... 25
Inspections ............................................................... 33
Operating Instructions ............................................... 43
Transport and Lifting Instructions .............................. 51
Maintenance ............................................................. 52
Specifications ........................................................... 56
Operator's ManualFirst Edition • First Printing
Part No.216062 1
About this Manual
Terex Hydra Platforms appreciates your choice of
our machine for your application. Our number one
priority is user safety, which is best achieved by
our joint efforts. This book is an operation and daily
maintenance manual for the user or operator of a
Terex Hydra Platform machine.
This manual should be considered a permanent part
of your machine and should remain with the
machine at all times. If you have any questions,
call Terex Hydra Platforms.
Product Identification
The machine serial number is located on the serial
label.
Intended Use
This machine is intended to be used only to support
personnel, along with their tools and materials, for
the purpose of inspecting, or maintaining, a bridge.
Bulletin Distribution and
Compliance
Safety of product users is of paramount importance
to Terex Hydra Platforms. Various bulletins are
used by Terex Hydra Platforms to communicate
important safety and product information to dealers
and machine owners.
The information contained in the bulletins is tied to
specific machines using the machine model
number and PIN/serial number.
Distribution of bulletins is based on the most
current owner on record along with their associated
dealer, so it is important to register your machine
and keep your contact information up to date.
To ensure safety of personnel and the reliable
continued operation of your machine, be sure to
comply with the action indicated in a respective
bulletin.
Introduction
Serial Label
Serial
Label
Operator's Manual First Edition • First Printing
2 Part No.216062
Introduction
Contacting the Manufacturer
At times it may be necessary to contact Terex
Hydra Platforms about this machine. When you do,
be ready to supply the model number and PIN/
serial number of your machine, along with your
name and contact information. At minimum, Terex
Hydra Platforms should be contacted for:
Accident reporting
Questions regarding product applications and
safety
Standards and regulatory compliance information
Questions regarding product modifications
Current owner updates, such as changes in
machine ownership or changes in your contact
information. (See Transfer of Ownership, below.)
Internet: http://www.genielift.com
e-mail: [email protected]
Transfer of Machine Ownership
Taking a few minutes to update owner information
will ensure that you receive important safety,
maintenane and operating information that applies
to your machine.
Please register your machine by visiting us on the
web at www.genielift.com/registration or by calling
us toll free at 1-800-536-1800.
Operator's ManualFirst Edition • First Printing
Part No.216062 3
Introduction
Danger
Failure to obey the instructions and
safety rules in this manual will
result in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1Avoid hazardous situations.
Know and understand the safety rules before
going on to the next section.
2Always perform a pre-operation inspection.
3Always perform function tests prior to use.
4Inspect the workplace.
5Only use the machine as it was intended.
You read, understand and obey the
manufacturer's instructions and safety rules—
safety and operator's manuals and machine
decals.
You read, understand and obey employer's
safety rules and work site regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Operator's Manual First Edition • First Printing
4 Part No.216062
Introduction
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Hazard Classification
Terex Hydra Platform uses symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
that, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result in
minor or moderate injury.
Indicates information considered
important, but not hazard related
(e.g. messages related to property
damage).
Red
Orange
Yellow
Blue
Operator's ManualFirst Edition • First Printing
Part No.216062 5
Symbol and Hazard Pictorials Definitions
Electrocution
Hazard
Do not exceed
platform capacity.
Do not allow more
than 5 people on
the platform.
Stay Clear of
Machine
Maintain Safe
Distance
Tip-over Hazard Set Outriggers
Before
Deployment
Authorized
Personnel
Only
Burn Hazard
Do Not Touch Run-Away Hazard Set Parking Brake Level Trailer
Before Towing
Read the
Operator”s Manual
Explosion Hazard
No smoking
No Flame
Stop engine
Electrocution
Hazard
Avoid Contact
Explosion / Burn
Hazard
Keep Open
Flames Away
Fire Hazard
P
P
P
P
Operator's Manual First Edition • First Printing
6 Part No.216062
Crush Hazard Stay Clear of
Moving Machine Crush Hazard Stay Clear of
Moving Machine
Wheel Hazard
Symbol and Hazard Pictorials Definitions
Stability Hazard
Do Not Operate in
Wind Speed Over
28 mph
Maximum Super
Elevation (8%)
Maximum Grade
(5%)
Torque Wheel Lug
Nuts
Lanyard
Attachment Point
0-28mph
(0-12.5m/s)
>28mph
(>12.5m/s)
>8%(4.5 )⁰
>5%(3 )⁰
Operator's ManualFirst Edition • First Printing
Part No.216062 7
General Safety
Safety signs and locations
215974GT
215963GT
215962GT
215976GT
215963GT
215979GT
215976GT 215962GT 215963GT
215974GT
215979GT
Operator's Manual First Edition • First Printing
8 Part No.216062
Safety signs and locations
General Safety
215959GT
215966GT
215965GT
215962GT
215965GT
215970GT
215959GT 215966GT 215965GT
215962GT 215970GT 233622GT
233622GT
(Around trailer chassis)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Terex Sistema di sollevamento
Terex
Terex Genie S-60 FE Manuale di installazione e funzionamento
Terex
Terex Genie QS-12R Manuale utente
Terex
Terex SX180H-745 Manuale utente
Terex
Terex Genie SHOV5DL15B-1001 Manuale utente
Terex
Terex Genie GS-1532 Manuale di installazione e funzionamento
Terex
Terex Genie GR Series Manuale utente
Terex
Terex Genie IWP Series Manuale utente
Terex
Terex C5000 Series Manuale utente
Terex
Terex Genie TX-34/20 Manuale utente
Terex
Terex Genie Z-60/37DC Manuale utente
Terex
Terex Genie QS-12W Manuale utente
Terex
Terex Genie Z-60 DC Manuale utente
Terex
Terex Genie GRC-12 Manuale utente
Terex
Terex Genie Z-45/25 Bi-Energy Manuale utente
Terex
Terex TA50RT Manuale utente
Terex
Terex Genie SX-135 XC Manuale utente
Terex
Terex Genie Z-45 DC Manuale di installazione e funzionamento
Terex
Terex GS90D-4695 Manuale di installazione e funzionamento
Terex
Terex Z3413-9461 Manuale di installazione e funzionamento
Terex
Terex SX18014-101 Manuale utente
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
