SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Audi: A3, A4, A6, A8
VW: Passat, Golf, Sharan, Tiguan
Ford: Mondeo, S-Max, Galaxy, Transit
Mercedes: C, E, CLS, S, CLK, SLK, SL
BMW: 320, 330, 520, 530
Alfa Romeo: 147, 159, 166
Fiat: Ulysse, Croma, Ducato
Lancia: Phedra, Thesis
GENERAL
This guide is part of the clutch tool-set and is therefore stored in a way that it remains intact.
The manufacturer is not liable for personal injury and property damage resulting from the illegal or
improper use.
APPLICATION
The SAC-Clutch Tool Kit can be quickly and professionally installed and removed SAC clutches.
Suitable for almost all SAC clutches with 3 - and 4-hole division, VAG, MB, Opel / GM, Volvo,
Renault, etc.
7 x coupling aligning mandrels, 12, 14, 15, 16, 17, 18, 19 mm
1 pressure spindle
1 x reset tool
1 x 4-arm traverse
1 x 3-arm traverse
1 x handle
4 x securing bolts M6
4 x securing bolts M7
4 x securing bolts M8
4 x nuts for securing bolts M8
1 x centre punch bore
1 x centring tool spindle with cone
1 x basic centring tool Clamping number
1 x basic centring tool Shaft sleeve
2 clamping cones
4 x coupling aligning mandrels 23, 26, 28, 34 mm
SAC Clutch Tool Set | 38 pcs.
