TRENDnet TEG-S40TXD Manuale utente
TEG-S40TXD
4-Port 10/100/1000Mbps
Gigabit Ethernet Switch
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user’s guide, may
cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
VCCI Warning
This is a product of VCCI Class A Compliance.
UL Warning
a) Elevated Operating Ambient Temperature-If installed in a
closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the
manufacturer's maximum rated ambient temperature (Tmra).
b) Reduced Air Flow-Installation of the equipment in a rack
should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
c) Mechanical Loading-Mounting of the equipment in the rack
should be such that a hazardous condition is not achieved due to
uneven mechanical loading.
d) Circuit Overloading-Consideration should be given to the
connection of the equipment to the supply circuit and the effect
that overloading of circuits might have on over current
protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing
this concern.
e) Reliable Earthing-Reliable earthing of rack-mounted
equipment should be maintained. Particular attention should be
iii
given to supply connections other than direct connections to the
branch circuit (e.g., use of power strips).
P/N : 1907GSW604T5000
TABLE OF CONTENTS
ABOUT THIS GUIDE..................................................................1
TERMS.......................................................................................1
OVERVIEW OF THIS USER’S GUIDE...............................................1
INTRODUCTION........................................................................3
GIGABIT ETHERNET TECHNOLOGY.............................................3
SWITCHING TECHNOLOGY .........................................................4
FEATURES..................................................................................5
UNPACKING AND SETUP.........................................................8
UNPACKING...............................................................................8
SETUP ........................................................................................8
DESKTOP INSTALLATION............................................................8
RACK INSTALLATION (OPTIONAL)..............................................9
CONNECTING NETWORK CABLE...............................................10
AC POWER..............................................................................10
IDENTIFYING EXTERNAL COMPONENTS ............................13
FRONT PANEL..........................................................................13
REAR PANEL............................................................................14
LED INDICATORS.....................................................................14
TECHNICAL SPECIFICATIONS.............................................17
1
ABOUT THIS GUIDE
This user’s guide tells you how to install your 4-Port
10/100/1000Mbps Gigabit Ethernet Switch and how to connect
it to your Gigabit Ethernet network.
Terms
For simplicity, this documentation uses the terms “Switch”
(first letter upper case) to refer to this 4-Port 10/100/1000Mbps
Gigabit Ethernet Switch, and “switch” (first letter lower case) to
refer to all the Ethernet switches; including the 4-Port
10/100/1000Mbps Gigabit Ethernet Switch.
Overview of this User’s Guide
?? Introduction: Describes the Switch and its features.
?? Unpacking and Setup: Helps you get started with the
basic installation of the Switch.
?? Identifying External Components: Describes the front
panel, rear panel, and LED indicators of the Switch.
?? Technical Specifications: Lists all the technical
specifications of the Switch.
Altri manuali per TEG-S40TXD
1
Indice
Altri manuali TRENDnet Interruttore
TRENDnet
TRENDnet TEG-S16R - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TE100-S1616 Manuale utente
TRENDnet
TRENDnet TEG-40080ES Manuale utente
TRENDnet
TRENDnet TE100-H5Eplus Manuale utente
TRENDnet
TRENDnet TE100-S16R Manuale utente
TRENDnet
TRENDnet TE100-S55E Manuale utente
TRENDnet
TRENDnet TEG-240WS Manuale utente
TRENDnet
TRENDnet TEG-S2500i Manuale utente
TRENDnet
TRENDnet TU-400 Manuale utente
TRENDnet
TRENDnet TUC-H4E Manuale utente
TRENDnet
TRENDnet TU-400E Manuale utente
TRENDnet
TRENDnet TI-RP262i Manuale utente
TRENDnet
TRENDnet TPE-TG240g Manuale utente
TRENDnet
TRENDnet TK-205i Manuale utente
TRENDnet
TRENDnet TE100-S5 Manuale utente
TRENDnet
TRENDnet TEG-424WS Manuale utente
TRENDnet
TRENDnet TI-PG1284i Manuale utente
TRENDnet
TRENDnet TPE-1020WS Manuale utente
TRENDnet
TRENDnet TEG-S16g Manuale utente
TRENDnet
TRENDnet TK-409K Manuale utente
