Uplus Lighting IP-Z740 Manuale utente

User manual

IP-Z740

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions……………………………………………………………………………3-4

Technical Specifications…………………………………………………………………………4

Control Menu ………………………………………………………………………………………5

DMX Channels ……………………………………………………………………………………6

Dimension …………………………………………………………………………………………7

Trouble Shooting…………………………………………………………………………………8

Fixture Cleaning………………………………………………………… ………………………8

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always

by taking its base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before

replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact your nearest

dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly

fixed to avoid vibration and slipping while operating. And make sure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people.

2.Technical Specifications

Input Voltage:AC90-240V,50/60Hz

Power Consumption:280W

Light Source:7X40W rgbw 4in1 LED

Lamp life:50000hrs

Beam Angle:5-50 ゜

Display :Digital display

Control Mode:DMX512,Master/Slave,Auto,Sound Active

DMX Channel:9/5Channels

Dimmer:0-100% smooth linear adjustment

Strobe:High speed strobe effect with 0-30 flashes per second

IP Rate:IP65

Dimension:343*219*165mm

3.Control Menu

Display:

MENU To select the programming functions

DOWN To go backward in the selected functions

UP To go forward in the selected functions

ENTER To confirm the selected functions (unlock screen)

Operations:

Press "MENU" to unlock screen, then press “Menu” to select 7 different functions, Press the "UP or

DOWN"keys to increase or decrease the value,Press "ENTER" to save and Exit.

Number

display

Function Explain

D001-9CH

9 channels address(001-512)B.C add minus address

D001-5CH

5 channels address(001-512)B.C add minus address

Function(099)

Jump(01-99) B, C modify the jump speed

Gchange(099)

Gradient (01-99) B, C modify the gradient speed

Pulse D:099

Strobe, (00-99) B, C modify the strobe speed

Voice running

sound

Red

D:255

red color selection, (000-255)

B, C key to modify the color selection

Green

D:255

Green color selection, (000-255)

B, C key to modify the color selection

Blue

D:255

Blue color selection, (000-255)

B, C key to modify the color selection

White

D:255

White color selection, (000-255)

B, C key to modify the color selection

Focus(000)

Focus,000-255

B, C modify the focus position

4.DMX Channels

DMX Channels(9 channels)

Number

display

Function Explain

1CH

Total Dimming

linear dimming from dark to light

2CH

Total Strobe

total Strobe from slow to fast

3CH

Feature

Selection

0-5 : empty

6--40: jump effect ;(dmx512）

41--80: Gradient effect;(dmx512）

81--120: pulse change effect(dmx512）

121--160: jump effect ;（built-in program）

161--200: Gradient effect;（built-in program）

201--240: pulse change effect（built-in program）

241--255: sound control（built-in program）

4CH

Function Speed

Function speed from slow to fast

5CH

R dimming

R dimming, linear dimming from dark to light

6CH

G dimming

G dimming, linear dimming from dark to light

7CH

B dimming

B dimming, linear dimming from dark to light

8CH

W dimming

W dimming, linear dimming from dark to light

9CH

Zoom

From small to big

DMX512 -5 Channels

Number

display

Function Explain

1CH

R dimming

R dimming, linear dimming from dark to light

2CH

G dimming

G dimming, linear dimming from dark to light

3CH

B dimming

B dimming, linear dimming from dark to light

4CH

W dimming

W dimming, linear dimming from dark to light

5CH

Zoom

From small to big

5.Dimension

6.Trouble Shooting

ollo

ing

few

oble

y occu

uring

ope

tion

. He

tion

leshooting

The

does

work

, no

ght

Check

nect

ion of p

owe

eas

ure

ins

volt

Check

pow

LED

responding

LED

on.

che

nectors,

link

ope

If th

nd no

espons

el,

che

ess

etti

s a

ity

nter

ittent

oble

che

ins

onn

ecto

PCB

nit

the

iou

ntroller

Check

or run

lon

volta

les

terfer

ence

inter

face

circui

. One

the

cha

ing

tep

moto

dam

the

nect

to th

PCB

oken.

oto

’

ive

PCB

ndition

7.Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,

smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Indice

Altri manuali Uplus Lighting Attrezzatura di illuminazione

Uplus Lighting

Uplus Lighting BAR 6 LASER Manuale utente

Uplus Lighting

Uplus Lighting MIX560 Manuale utente

Uplus Lighting

Uplus Lighting BR360 Manuale utente

Uplus Lighting

Uplus Lighting IP1000 Strobe Manuale utente

Uplus Lighting

Uplus Lighting 200 BLINDER Manuale utente

Uplus Lighting

Uplus Lighting 4020 IP Manuale utente

Uplus Lighting

Uplus Lighting 280 LED BSW Manuale utente

Uplus Lighting

Uplus Lighting W3725 Manuale utente

Uplus Lighting

Uplus Lighting IP-L360 Manuale utente

Uplus Lighting

Uplus Lighting DUAD540 STROBE Manuale utente

Uplus Lighting

Uplus Lighting IP 300Z SPOT-WW Manuale utente

Uplus Lighting

Uplus Lighting 37X15ZWASH Manuale utente

Uplus Lighting

Uplus Lighting 200 LED BSW Manuale utente

Uplus Lighting

Uplus Lighting 200 MZ-SPOT PR Manuale utente

Uplus Lighting

Uplus Lighting 150COBPAR Manuale utente

Uplus Lighting

Uplus Lighting 750 BSWF Manuale utente

Uplus Lighting

Uplus Lighting 400 BLINDER Manuale utente

Uplus Lighting

Uplus Lighting 3010 IP PAR Manuale utente

Uplus Lighting

Uplus Lighting 300 MZ-SPOT PR Manuale utente

Uplus Lighting

Uplus Lighting IR 1210 PAR Manuale utente

Uplus Lighting

Uplus Lighting PF350 Manuale utente

Uplus Lighting

Uplus Lighting MH12X40 PIXEL BAR Manuale utente

Uplus Lighting

Uplus Lighting BL6 Manuale utente

Uplus Lighting

Uplus Lighting RETRO 360 Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente