Zoom R4 Manuale utente

Quick Tour

Copying or reprinting this manual in part or in whole without permission is prohibited.

You might need this manual in the future. Always keep it in a place where you can access it easily.

The contents of this manual and the specifications of the product could be changed without notice.

You must read the Usage and Safety Precautions before use.

An Operation Manual with more detailed explanations and other documents

related to this product can be viewed on the following website.

www.zoom.jp/docs/r4

Inserting microSD cards

Supported recording media:

microSDHC: 4 GB – 32 GB

microSDXC: 64 GB – 1 TB

• Always turn the power off before insert-

ing or removing a microSD card.

• To remove a microSD card, push it fur-

ther into the slot and then pull it out.

Turning the power on

Press and hold

Batteries (alkaline,

nickel-metal hydride

or lithium)

Making settings when rst turned on

Setting the date and time

Use to select a

setting item, and press

to conrm.

Use to change the

date/time, and press to

conrm.

After setting all the items, select

“OK” and press to complete

setting the date and time.

Setting the battery type

Throughout these instructions use buttons

according to the screen to select and confirm

(execute).

▲

BACK ▼✓

After setting is complete, the Home Screen

will open.

Home Screen

Recording

Connecting guitars and mics

To use the built-in mic for recording, set

the switch to .

XLR

Guitar

1: GND

2: HOT

3: COLD

Dynamic mic Condenser

mic

Selecting tracks for recording

Press to cycle through the input sources that

can be assigned to the track.

Press to return to the Home Screen.

Input source Explanation

-Use when nothing is connected (when not recording)

INPUT A Use when connecting guitars or dynamic mics

INPUT A Use when connecting condenser mics

INPUT B Use when connecting guitars or dynamic mics

INPUT B Use when connecting condenser mics

MIC Use for the built-in mic

• Phantom power will be supplied if INPUT A or INPUT B is selected.

• Do not supply phantom power to devices that are not compatible with it. Doing so could damage the device.

Adjusting the volume

■Use the faders to adjust track levels

Conrm that the level meter is moving.

■Connect headphones and adjust the volume

Headphones

Setting effects

Effects can be applied to INPUT A or the built-in mic and recorded.

Press to return to the Home Screen.

Setting the rhythm

Press to return to the Home Screen.

Item Explanation

Rhythm This turns the rhythm on/off.

Pattern This selects the rhythm type.

Tempo This sets the tempo.

Volume This adjusts the volume.

Pre Count This turns the precount on/off.

Recording

Operation

button

Operation when

recording

Operation when

stopped

Stop recording Move to beginning

Stop recording

(Continue playback) Resume recording

Use the same procedures to record additional

tracks.

Playing recordings

Operation button Operation when

playing

Operation when

stopped

Press and hold to

search backward/

forward

Move playback

position forward/

backward

Stop playback Move to

beginning

Stop playback

Resume playback

Adjusting the mix and bouncing

Adjusting the mix

■Adjust EQ and panning

Press to return to the Home Screen.

Item Explanation

High This boosts or cuts high frequencies.

Middle This boosts or cuts mid-range frequencies.

Low This boosts or cuts low frequencies.

Pan This sets the left-right sound position.

Echo This adjusts echoes.

Reverb This adjusts reverberations and reections.

■Use faders to adjust track levels

While listening to playback, use the faders to

adjust the balance.

1234

－A －－

1234

Bouncing tracks

Tracks 1–4 can be combined in a BOUNCE track. Quick Bounce and Real Time Bounce

options are available.

Item Explanation

Quick Bounce This can quickly combine tracks 1–4 in the BOUNCE track.

Real Time Bounce This allows faders to be used to adjust levels while bouncing tracks 1–4 to the BOUNCE track.

Clearing tracks 1–4 makes additional re-

cording possible.

• Press to cancel when bouncing.

• During a Real Time Bounce, pressing , or will bounce the recording up to that moment to the

BOUNCE track.

• To revert a bounce to the previous state (restore the original recordings to tracks 1–4), press .

The UNDO function can only be used on the most recent bounce.

Names of parts

TRACK/FUNCTION buttons

EFFECT button

INPUT button

INPUT A/built-in mic switch

INPUT A/B

Search backward/forward buttons

Stop/Play/Record buttons

Built-in mic

RHYTHM button

Display

BOUNCE/UNDO buttons

Faders

Headphone/LINE OUT jack

POWER button

VOLUME buttons

USB port (Type-C)

Battery cover

Tripod socket

microSD card slot

Altri manuali per R4

Indice

Altri manuali Zoom Strumento di misura

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente