Agilent Technologies 8757D Manuale utente

Operating Manual

Agilent Technologies

8757D

Scalar Network Analyzer

Manufacturing Part Number: 08757-90109

Printed in USA

Print Date: March 2005

Supersedes: November 2000

Silicon Investigations

Repair Information - Contact Us

920-955-3693

www.siliconinvestigations.com

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a product

number/name was HP XXXX the current name/number is now Agilent XXXX. For example,

model number HP 8757D is now model number Agilent 8757D.

Documentation Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FUR-

THER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AGILENT

DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO

THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE FOR

ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY

INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WAR-

RANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.

DFARS/Restricted Rights Notice

If software is for use in the performance of a U.S. Government prime contract or

subcontract, Software is delivered and licensed as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995), or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (June 1987) or

any equivalent agency regulation or contract clause. Use, duplication or disclosure of

Software is subject to Agilent Technologies’ standard commercial license terms, and

non-DOD Departments and Agencies of the U.S. Government will receive no greater than

Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users

will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or

DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.

Printing Copies of Documentation from the Web

To print copies of documentation from the Web, download the PDF file from the Agilent

web site:

•Gotohttp://www.agilent.com.

• Enter the document’s part number (located on the title page) in the Quick Search box.

• Click GO.

• Click on the hyperlink for the document.

• Click the printer icon located in the tool bar.

Contacting Agilent

This information supersedes all prior HP contact information.

Online assistance: www.agilent.com/find/assist

Americas

Brazil

(tel) (+55) 11 3351 7012

(fax) (+55) 11 3351 7024

Canada

(tel) +1 877 894 4414

(fax) +1 303 662 3369

Mexico

(tel) 1 800 254 2440

(fax) 1 800 254 4222

United States

(tel) 800 829 4444

(alt) (+1) 303 662 3998

(fax) 800 829 4433

Asia Pacific and Japan

Australia

(tel) 1 800 225 574

(fax) 1 800 681 776

(fax) 1 800 225 539

China

(tel) 800 810 0508

(alt) 800 810 0510

(fax) 800 810 0507

(fax) 800 810 0362

Hong Kong

(tel) 800 933 229

(fax) 800 900 701

India

(tel) 1600 112 626

(fax) 1600 112 727

(fax) 1600 113 040

Japan (Bench)

(tel) 0120 32 0119

(alt) (+81) 426 56 7799

(fax) 0120 01 2144

Japan (On-Site)

(tel) 0120 802 363

(alt) (+81) 426 56 7498

(fax) (+81) 426 60 8953

Singapore

(tel) 1 800 275 0880

(fax) (+65) 6755 1235

(fax) (+65) 6755 1214

South Korea

(tel) 080 778 0011

(fax) 080 778 0013

Taiwan

(tel) 0800 047 669

(fax) 0800 047 667

(fax) 886 3492 0779

Thailand

(tel) 1 800 2758 5822

(alt) (+66) 2267 5913

(fax) 1 800 656 336

Malaysia

(tel) 1800 880 399

(fax) 1800 801 054

Europe

Austria

(tel) 0820 87 44 11*

(fax) 0820 87 44 22

Belgium

(tel) (+32) (0)2 404 9340

(alt) (+32) (0)2 404 9000

(fax) (+32) (0)2 404 9395

Denmark

(tel) (+45) 7013 1515

(alt) (+45) 7013 7313

(fax) (+45) 7013 1555

Finland

(tel) (+358) 10 855 2100

(fax) (+358) (0) 10 855 2923

France

(tel) 0825 010 700*

(alt) (+33) (0)1 6453 5623

(fax) 0825 010 701*

Germany

(tel) 01805 24 6333*

(alt) 01805 24 6330*

(fax) 01805 24 6336*

Ireland

(tel) (+353) (0)1 890 924 204

(alt) (+353) (0)1 890 924 206

(fax)(+353) (0)1 890 924 024

Israel

(tel) (+972) 3 9288 500

(fax) (+972) 3 9288 501

Italy

(tel) (+39) (0)2 9260 8484

(fax) (+39) (0)2 9544 1175

Luxemburg

(tel) (+32) (0)2 404 9340

(alt) (+32) (0)2 404 9000

(fax) (+32) (0)2 404 9395

Netherlands

(tel) (+31) (0)20 547 2111

(alt) (+31) (0)20 547 2000

(fax) (+31) (0)20 547 2190

Russia

(tel) (+7) 095 797 3963

(alt) (+7) 095 797 3900

(fax) (+7) 095 797 3901

Spain

(tel) (+34) 91 631 3300

(alt) (+34) 91 631 3000

(fax) (+34) 91 631 3301

Sweden

(tel) 0200 88 22 55*

(alt) (+46) (0)8 5064 8686

(fax) 020 120 2266*

Switzerland (French)

(tel) 0800 80 5353 opt. 2*

(alt) (+33) (0)1 6453 5623

(fax) (+41) (0)22 567 5313

Switzerland (German)

(tel) 0800 80 5353 opt. 1*

(alt) (+49) (0)7031 464 6333

(fax) (+41) (0)1 272 7373

Switzerland (Italian)

(tel) 0800 80 5353 opt. 3*

(alt) (+39) (0)2 9260 8484

(fax) (+41) (0)22 567 5314

United Kingdom

(tel) (+44) (0)7004 666666

(alt) (+44) (0)7004 123123

(fax) (+44) (0)7004 444555

(tel) = primary telephone number; (alt) = alternate telephone number; (fax) = FAX number; * = in country number

11/16/04

Contents

able of Conten

1. General Information

Safet

yConsiderations .. . . . . . ..................1-2

The HP 8757D Analyzer ................. . . . . . ..1-6

T/LCD A

ttributes ........ . . . . . ...........1-6

Displa

ys . . . . . . .................... . . . . 1-6

eripherals ................... . . . .......1-6

Calibration Data and Instrumen

tStates ........... . ....1-6

Measuremen

tChannels ...... . ................1-6

Local and Remote Operation .................... . 1-6

Options Available . . . . .................. . . . . 1-7

Speci cations, General Requiremen

ts, and Operating Characteristics . . . .1-9

Man

ufacturer's Declarations ............. . . . ......1-17

Accessories and Supplies .................... . . . . 1-20

2. Installation

tro duction .... . ........................ 2-1

Initial Insp ection ............ . ..............2-2

Operating En

vironmen

t................. . ......2-3

Electrostatic Disc

harge . . . . ...................2-4

er Requiremen

ts ..... . . . ..................2-5

Chec

king the Line V

oltage and F

use ....... . . . . . . . ....2-5

Chec

king the Po

er Cable ................. . . . . . 2-6

Equipmen

tRequired But Not Supplied . . . . . . ...........2-7

CDetection ........... . . . . . . . ..........2-7

Firm

ware Compatibilit

y................ . . . . . . . 2-7

RackMounting . . . . . . . . . . ............ . . . . . . 2-8

Connecting the Analyzer to aSource .. . ........... . ...2-10

External Mo dulation . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Other Con gurations . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Connecting the Analyzer to an External Monitor . . . . . . . . . . . . . 2-16

CRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Setting the HP-IB Address . . . . . . . . . . . . . . . . . . . . . . . 2-16

HP-IB Connectors and Cables . . . . . . . . . . . . . . . . . . . . . 2-18

Storing and Shipping . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Environment.. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Packing the Instrument . . . . . . . . . . . . . . . . . . . . . . . 2-20

Returning an Instrument for Service . . . . . . . . . . . . . . . . . . 2-20

Contents-1

3. Operation

HP/Agilen

t8757D Firm

are Capabilit

y..... . . . . . . . . . . . 3-1

Local Operation

HP 8757D User's Guide (wire-o book) .... . . . . . . . . . . . . . .

1. Operating . ... . . . . . . . . . ............ . . . 3

2. Transmission Measurements .................. . . 10

3. Reection Measuremen

ts .......... . . . . . . . ....17

4. Limit Lines .. . . . . . . . .................. 19

5. Alternate Sw

eep ................. . . . . . . . .21

6. External Disk Sa

e/Recall ...... . . . . . . . ........23

7. Special F

unctions . . . . . .................. . . 25

A. A

ersus DC Detection .............. . . . . . ..26

Index ........... . . . . . ...............27

HP 8757D Operating Reference (wire-o book) ..............

1. F

ron

t-P

anel F

eatures ............ . . . . . . . ....1-1

2. CHANNEL .......... . . . ..............2-1

3. ENTR

YArea ..... . ....................3-1

4. FUNCTION Keys . . . .................... . 4-1

5. INSTR

UMENT ST

TE .. . . . . . . . .............5-1

6. Rear P

anel F

eatures ......... . . . . . . . .......6-1

A. Op erator's Chec

k................... . . . ..A-1

B. Softk

ey Men

uStructure Maps . . .................B-1

C. P

erforming an External Calibration ......... . .......C-1

D. Measuremen

tApplications .................. . .D-1

Remote Operation

HP-IB Programming Notes .. . ....................1

HP 8757D Quic

kReference Guide ...... . . . ..........1

HP 8757D with HP 90000 Series 200/300 (BASIC) ... . . . .....1

HP 8757D with HP V

ectra (Quic

kBasic 4.5) ......... . . . ..1

HP 8757D with HP V

ectra (Quic

kC 2.5) .............. . . 1

In Case of Dicult

Con

ten

ts ... . ... . . . .................. . . . 1

Man

ual Operation ......... . . . . . . . ..........2

Line P

er . ........... . ............ . ...2

Error Co des . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

HP-IB Connections and Addresses . . . . . . . . . . . . . . . . . . 3

Other Cable Connections . . . . . . . . . . . . . . . . . . . . . . 4

Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . 4

Inaccurate Operation . . . . . . . . . . . . . . . . . . . . . . . . . 5

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Mo dulation Characteristics . . . . . . . . . . . . . . . . . . . . . . 5

Sweep Sp eed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Calibrator Option 002 Only . . . . . . . . . . . . . . . . . . . . . 5

Miscellaneous Problems . . . . . . . . . . . . . . . . . . . . . . . . 6

Alternate Sweep . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Number of Trace Points and Trace Memory . . . . . . . . . . . . . . 7

Contents-2

Autozero of DC Detectors . . . . . . ............ . . . . 7

e/Recall Registers ......... . . . . . . . . . . . . . ..7

System In

terface On/O . . . . . . . . . . . . . ..........8

Measurement-Memory-Memory . . ............ . . . . . . 9

Cursor Searc

h.... . . . . . . . . . . . . . ..........9

On-Site Service . . . . . . . . . ............ . . . . . . . 9

Main Error Co des .............. . . . . . . . .....10

er Calibration Error Messages .. . . . . . . . ..........13

Detector Error Messages (HP 85037A/B only . ..............14

On-Site Service -Calibration ............ . . . . . . . ..14

Connector Care

Principles of Micro

eConnector Care|Quic

kReference Card ......

Glossary

Contents-3

General Information

This c

hapter pro

vides information on the follo

wing topics:

general safet

y considerations

serial n

bers

analyzer description

wer calibrator option

ailable options

speci cations

operating c

haracteristics

man

ufacturer's radio in

terference declaration

man

ufacturer's sound emission declaration

man

ufacturer's ISO declaration

ordering accessories and supplies

General Information 1-1

General Safety Considerations

Warning

No operator serviceable parts insi e. Refer servicing to qualifie personel. T

prevent electric shock, o not remo

eco

ers.

arning

oprev

ent electrical shock, isconnect the Agilent T

echnologies 8757D from

mains before cleaning. Use a ry cloth or one slightly ampene with w

ater to

clean the external case parts. Do not attempt to clean internally

Warning

If this pro uct is not use as specifie , the protection pro

vi e b

ythe

equipment coul be impaire . This pro uct must be use in anormal con ition

(in which all means for protection are intact) only

Caution

Alwa

ys use the three-prong A

Cpo

er cord supplied with this pro duct. F

ailure

to ensure adequate earth grounding b

ynot using this cord ma

ycause pro duct

damage.

Safety Symbols

General

This pro duct w

as designed and man

ufactured in accordance with in

ternational safet

standards. Before y

ou operate this analyzer, review the pro duct and related do cumen

tation.

Become familiar with safet

ymarkings and instructions.

Instruction man

ual sym

bol: the product will bemark

ed with this sym

bol

when it is necessary for the user to refer to the instruction man

ual (refer to

able of Con

ten

ts).

Indicates hazardous v

oltages.

Indicates earth (ground) terminal.

The CE mark is the registered trademark of the European Communit

The CSA mark is a registered trademark of the Canadian Standards

Asso ciation.

ISM1 A

This is a sym

bol of an Industrial Scien

ti c and Medical Group 1, Class A

pro duct (CISPR 11, Clause4).

The \ON" symbol is used to mark the p osition of the analyzer's line p ower

switch.

The \STANDBY" symbol is used to mark the position of the analyzer's power

switch.

1-2 General Information

Altri manuali per 8757D

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies N3970A Manuale operativo

Agilent Technologies

Agilent Technologies 16800 Series Scheda tecnica

Agilent Technologies

Agilent Technologies OmniBER 718 SDH Manuale utente

Agilent Technologies

Agilent Technologies EMC Series Manuale

Agilent Technologies

Agilent Technologies E5072A Manuale utente

Agilent Technologies

Agilent Technologies 83438A Manuale utente

Agilent Technologies

Agilent Technologies 4294A Manuale del proprietario

Agilent Technologies

Agilent Technologies Seahorse XFe96 Manuale utente

Agilent Technologies

Agilent Technologies 8510C Manuale utente

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 1660A Series Manuale di servizio

Agilent Technologies

Agilent Technologies Agilent 4396B Manuale utente

Agilent Technologies

Agilent Technologies 8510C Manuale utente

Agilent Technologies

Agilent Technologies U1461A Manuale utente

Agilent Technologies

Agilent Technologies ENA Series Manuale utente

Agilent Technologies

Agilent Technologies E4980A Manuale utente

Agilent Technologies

Agilent Technologies 16900 Series Manuale utente

Agilent Technologies

Agilent Technologies WireScope 350 Manuale utente

Agilent Technologies

Agilent Technologies E5500A Manuale utente

Agilent Technologies

Agilent Technologies ESA-E Series Manuale

Agilent Technologies

Agilent Technologies E4440A Guida rapida

Agilent Technologies

Agilent Technologies G6691A Manuale utente

Agilent Technologies

Agilent Technologies E8362B Manuale utente

Agilent Technologies

Agilent Technologies AN 1287-6 Istruzioni per l'installazione e il funzionamento

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente