B+K precision 600 Manuale utente

12V SLA

Battery Capacity

Analyzer

INSTRUCTION

MANUAL

Refer to the Front view of the unit.

1) AH Range : With this key the user can select the

correct AH range according to the battery

under test.

2) Select LED:This LED glows toindicate that user can

select the AH range.

3) Locked LED:This LED is ON when the unit locks to a

particular AH range set by the user.

4) Display Mode:This key selects the display either as

No load voltageor % balance

capacity.

5) Batt. Voltage:When displayindicates Batt. voltage this

LED glows.

6) % Balance Capacity:This LED glows when remainingcapacity

is displayed.

7) Load Test:The test startsby pressing this key.

8) Ready:When this LED glows steadily, it indicates

thatthe unit is ready to conduct a test.

9) Test On: This LED glows for approx. 2 sec. when

the battery test is carried out.

10) Reverse Polarity:If the unitis connected to a battery in

reversepolarity this LED

2.2 OPERATING PROCEDURE

Follow the steps as outlined below :

2.2.1 Connection Procedure Connect Battery Capacity

Analyser (600) to Battery UnderTest(BUT). Connect the

+ve terminal of 600 to +ve terminal of Battery. Connect-ve

terminal of 600 to –ve terminal of Battery. The 600 will be

powered with the BUT. On Power up, 600 performs a self

test by turning on the 7 segments, LEDs one after another

& finally flashing the version number.

Caution: Do not connect the +ve terminal of 600 to _ve

terminal of BUT and _ve terminal fo 600 to +ve terminal of

BUT. On doing so, the ‘Reverse Polarity’ LED glows as

shown.

2.2.2 Selecting AH Capacity

Press the 'AH Range' key. The select LED glows as

shown.

The display will show the last selected/stored AH value.

(Power ON default value is 7 AH)

To change the value to say 100 AH press the key again.

Display shows new value. Keep on pressing till the

desired AH is obtained.

To Lock the AH capacity, either press any key OTHER

than the AH Range key OR wait for about 10 seconds.

Your selected AH value

will automatically get lockedLocking is indicated by the

glowing of 'Locked' LED.

2.2.3 Conducting a Test

Test can be conducted any time by pressing the “Load

Test” key.

By doing so the ‘Test On’ LED starts glowing.

Typically, it glows for about 2 seconds. Thereafter the

‘Ready’ test starts blinking.

(The blinking time depends on the AH range slsected).

Thereafter it becomes steady.

Note: User cannot conduct a test while the ‘Ready’ LED is

blinking.

2.2.4 Observing Result After a Test

By default the Batt. Voltage is displayed on the display. To

observe the Balance Capacity left, press the ‘Display Mode’

switch.

The display will show the capacity in percentage.

Note: Balancce Capacity can have a meaningful value only after

conduction of a test. At power on, a value of 0 is shown. Hence

Balance Capacity should be seen only after conduction of a

test. To observe No Load Batt. Voltage, press the ‘Display

Mode Key’. The display willshow the No Load Batt. Voltage.

2.3 CAUTION

1) Do not connect Model 600 to a voltage source more than 20V.

2) Do not connect the unit to a battery connected in circuit.

Altri manuali per 600

Altri manuali B+K precision Strumento di misura

B+K precision

B+K precision 2650 Manuale utente

B+K precision

B+K precision 601B Manuale utente

B+K precision

B+K precision DAS60-P Manuale utente

B+K precision

B+K precision 2708B Manuale utente

B+K precision

B+K precision 1535A Manuale utente

B+K precision

B+K precision 830B Manuale utente

B+K precision

B+K precision 5335B Manuale utente

B+K precision

B+K precision 240A Manuale utente

B+K precision

B+K precision 5335C Manuale utente

B+K precision

B+K precision 5335B Manuale utente

B+K precision

B+K precision 600B Manuale utente

B+K precision

B+K precision 2640 Manuale utente

B+K precision

B+K precision 2831C Manuale utente

B+K precision

B+K precision 732A Manuale utente

B+K precision

B+K precision 4045B Manuale utente

B+K precision

B+K precision 8540 Manuale utente

B+K precision

B+K precision 878B Manuale utente

B+K precision

B+K precision SEFRAM 7861 Manuale utente

B+K precision

B+K precision 602 Manuale utente

B+K precision

B+K precision CP62 Manuale utente

B+K precision

B+K precision 308A Manuale utente

B+K precision

B+K precision 600B Manuale utente

B+K precision

B+K precision RFM3000 Series Manuale utente

B+K precision

B+K precision 5332 Analyst 2050 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente