B+K precision 830C Manuale utente
Model 830C, 890C
Dual Display
Capacitance Meter
INSTRUCTION MANUAL
1
Safety Summary
The following safety precautions apply to both
operating and maintenance personnel and
must be observed during all phases of
operation, service, and repair of this
instrument.
DO NOT OPERATE IN AN EXPLOSIVE
ATMOSPHERE
Do not operate the instrument in the presence
of flammable gases or fumes. Operation of
any electrical instrument in such an
environment constitutes a definite safety
hazard.
KEEP AWAY FROM LIVE CIRCUITS
Instrument covers must not be removed by
operating personnel. Component
replacement and internal adjustments must be
made by qualified maintenance personnel.
DO NOT SUBSTITUTE PARTS OR MODIFY
THE INSTRUMENT
Do not install substitute parts or perform any
unauthorized modifications to this instrument.
Return the instrument to B&K Precision for
2
service and repair to ensure that safety
features are maintained.
WARNINGS AND CAUTIONS
WARNING and CAUTION statements, such
as the following examples, denote a hazard
and appear throughout this manual. Follow all
instructions contained in these statements.
A WARNING statement calls attention to an
operating procedure, practice, or condition,
which, if not followed correctly, could result in
injury or death to personnel.
A CAUTION statement calls attention to an
operating procedure, practice, or condition,
which, if not followed correctly, could result in
damage to or destruction of part or all of the
product.
3
SAFETY GUIDELINES
To ensure that you use this device safely,
follow the safety guidelines listed below:
This meter is for indoor use, altitude up to
2,000 m.
The warnings and precautions should be
read and well understood before the
instrument is used.
When measuring in-circuit components, first
de-energize the circuits before connecting to
the test leads.
Never attempt to measure voltage with this
instrument.
Do not use the device if it appears damaged
in form.
Inspect the leads for damaged insulation or
exposed metal. Replace damaged leads if
necessary.
Disconnect power and discharge all
capacitors prior to testing.
The meter is safety-certified in compliance
with EN61010 (IEC 1010-1) Installation
4
Category II (CAT. II) 50 V, Pollution Degree
2 environment.
Use the meter only as specified in this
manual. Otherwise, the protection provided
by the meter may be impaired.
The power for the meter is supplied with a
single standard 9V battery. It can also
operate from AC line using a 12V AC to DC
adaptor. If a power adaptor is selected,
please be sure to use one with correct AC
line input voltage and fulfills the safety
requirements of a relevant IEC standard.
Use only battery specified by the meter. See
“Installing Battery” section for details.
5
Safety Symbols
This symbol is a warning and
indicates that the user should refer to
the operating instructions located in
the manual.
DC Current
Indicates inside pin is positive (+),
outside is negative (-)
Compliance Statements
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European
Union and other European countries with separate
collection systems)
6
This product is subject
to Directive 2002/96/EC
of the European
Parliament and the
Council of the European
Union on waste
electrical and electronic
equipment (WEEE) , and
in jurisdictions
adopting that Directive,
is marked as being put
on the market after
August 13, 2005, and
should not be disposed
of as unsorted
municipal
waste. Please
utilize your local WEEE
collection
facilities in the
disposition of this
product and otherwise
observe all applicable
requirements.
7
Environmental Conditions
Operating Environment
0 °C to 40 °C
Storage Humidity
0 – 80% R.H.
Storage Environment
-20 °C to +50 °C
Pollution degree
Pollution degree 2
8
TABLE OF CONTENTS
SAFETY GUIDELINES...............................................3
INTRODUCTION.......................................................11
PACKAGE CONTENTS ...........................................13
FRONT PANEL OVERVIEW....................................14
Front Panel Display Descriptions .................................. 15
Front Panel Buttons ...................................................... 16
LCD DISPLAY OVERVIEW......................................18
LCD Display Descriptions ............................................. 18
PUSH BUTTONS OVERVIEW.................................20
POWERING INSTRUMENT .....................................22
Installing Battery ........................................................... 22
Connecting External Power Source .............................. 24
Low Battery Indication .................................................. 27
Backlit Display .............................................................. 27
POWER ON OPTIONS.............................................29
Reset HI/LO Limits ........................................................ 29
View Firmware Version ................................................. 30
Setup Menu .................................................................. 30
SETUP OPTIONS.....................................................31
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali B+K precision Strumento di misura
B+K precision
B+K precision 4063 Manuale utente
B+K precision
B+K precision 2831C Manuale utente
B+K precision
B+K precision BA8100 Manuale utente
B+K precision
B+K precision 830B Manuale utente
B+K precision
B+K precision CP62 Manuale utente
B+K precision
B+K precision 4070A Manuale utente
B+K precision
B+K precision 5332 Analyst 2050 Manuale utente
B+K precision
B+K precision 894 Manuale utente
B+K precision
B+K precision DAS30 Manuale utente
B+K precision
B+K precision 313C Manuale utente
B+K precision
B+K precision 240A Manuale utente
B+K precision
B+K precision BK603B Manuale utente
B+K precision
B+K precision 467 Manuale utente
B+K precision
B+K precision 302 Manuale utente
B+K precision
B+K precision PR65 Series Manuale utente
B+K precision
B+K precision 2831E Manuale utente
B+K precision
B+K precision 308A Manuale utente
B+K precision
B+K precision 467 Manuale utente
B+K precision
B+K precision SEFRAM 7861 Manuale utente
B+K precision
B+K precision 8500B Series Manuale utente
