CYP CH-2602TXWPUS Manuale utente

CH-2602TXWPUS

HDMI over HDBaseT Transmitter (PD)

with Optical Audio Return (OAR)

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 26/08/16 Preliminary release

RDV2 22/03/17 Separation to 2 manuals

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 5

6.3 IR Cable Pin Assignment........................... 6

7. Connection Diagram ......................................7

8. Specications ..................................................8

9. Acronyms .........................................................9

1. INTRODUCTION

This HDBaseT 2.0 Transmitter can send uncompressed UHD video

and audio to a compatible Receiver over a single Cat.5e/6/7 cable

up to 100m. It has the added benet of extending control and

communication signals through the built-in Ethernet, USB, RS-232 and

IR ports. Independent external digital and analog audio transmission

capability gives users the extra convenience of additional audio

connections.

This unit's system supports connecting any standard USB 2.0 host to the

Transmitter, enabling the extension of the USB connection to up to 2

USB ports located on the Receiver, allowing it to act like a USB hub.

The integrated 48V PoH (Power over HDBaseT) support provides power

to the Transmitter (PD) from the Receiver (PSE), eliminating the need

for a separate power supply for the Receiver. The 2 gang US wallplate

mechanical design allows for exibility in mounting locations, saving

space and making your presentation space orderly and tidy.

2. APPLICATIONS

• Home theater extension and control

• Lecture hall display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over HDBaseT Transmitter

• 1×IR Blaster Cable

• 1×Terminal Block (3-pin)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI input source equipment such as media players, video game

consoles, PCs or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

• High quality Cat.5e/6/7 cables (Cat.6 or better is recommended).

5. FEATURES

• Supports the HDBaseT 2.0 specication over a single Cat.6/7 cable

up to 100m/328ft and Cat.5e cable up to 90m/295ft

• HDBaseT 5Play™ convergence: High-Denition (HD) Video and

Audio, 100BaseT Ethernet, 48V PoH, and Control (Bi-directional IR/

RS-232 pass-through)

• Transmitter (PD) is powered by 48V PoH from the Receiver (PSE)

• HDMI with 3D & 4K@60Hz (YUV 4:2:0) support, DVI 1.0 compatible

• HDCP 2.2 compliant

• 1×USB 2.0 Type B port

• Supports pass-through of HD audio formats: LPCM 2.0/5.1/7.1,

Bitstream, and HD Bitstream

• Supports optical audio sampling rates up to 48kHz

• Supports external analog and digital audio extension including

support for ARC (Audio Return Channel)

• Supports RS-232 baud rates from 110~115200bps

• 2 gang US wallplate mechanical design

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OPT. OUT OUT 1 IN 2

USB

AUDIO IN

UPDATE

ARC OUT

ON OFF

RS232 IN

LAN

HDMI IN

POWER

LINK

611

1POWER LED: This LED will illuminate when the device is receiving

power.

2UPDATE: This is reserved for rmware update use only. During

normal operation the dipswitch should be set to the right.

3USB: Connect to a PC or Laptop to extend the USB data

connection to the Receiver’s USB ports.

4AUDIO IN: Connect to the stereo analog output of a device such

as a CD player or PC to extend it to the Receiver’s AUDIO OUT L/R

port.

5ARC OUT ON/OFF: Enables or disables support for ARC (Audio

Return Channel) signals from the HDMI device connected to the

Receiver. When switched to ON the ARC audio will be routed to

both the HDMI input as well as the OPT. OUT port. When switched

OFF no ARC audio will be passed.

Note: When ARC is enabled the maximum supported HDMI cable

length may vary. It is suggested to use cables under 2 meters long

to ensure the best audio quality.

6OPT. OUT: Connect to an audio receiver or powered speaker set to

reproduce the audio signal from the Receiver’s OPT. IN port.

7IR OUT 1: Connect to the provided IR Blaster to transmit IR signals to

devices within direct line-of-sight of the IR Blaster.

8IR IN 2: Connect to the provided IR Extender to extend the IR

control range of remotely located devices. Ensure that the remote

being used is within direct line-of-sight of the IR Extender.

9LAN: Connect to an Ethernet supporting device or to your local

network as appropriate. The yellow LED will illuminate to indicate a

successful LAN connection between the Transmitter and Receiver

and will blink to indicate a data transmission. The green LED will

illuminate when the connected Ethernet speed is 100Mbit/s.

10 RS-232 IN: Connect to a PC, laptop or other serial control device

for the extension of RS-232 signals to the Receiver.

11 HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box.

6.2 Rear Panel

CAT5e/6/7 OUT

1CAT5e/6/7 OUT: Connect to the Receiver unit with a single

Cat.5e/6/7 cable for transmission of all data signals. The yellow LED

will illuminate to indicate a successful data connection between

the Transmitter and Receiver. If the yellow LED blinks irregularly it

indicates a data link error. The green LED will illuminate to indicate

when PoH is active.

Indice

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente