Draper A10/EXP/F Manuale utente

Unscrew barrel from pump head anti-clockwise (note no

barrel on Draper Stock No.16157).

Remove screw-cap from grease cartridge.

Push base of grease cartridge until grease is protruding

approx. 6mm out of the cartridge.

This is required to prevent air entering the pump unit.

INSTRUCTIONS

Stock Nos.16157, 16159, 16160 Part Nos.A10/EXP/F, A9/EXP/LS, A8/EXP/LS

2. ASSEMBLY

1. TECHNICAL DESCRIPTION

Manual for

Screw-on Grease Guns

Stock No..............................................16159 .............................................16160 .............................................16157

Part No............................................ A9/EXP/LS .......................................A8/EXP/LS.......................................A10/EXP/F

Pressure......................................10,000psi/690bar ............................5,000psi/345bar .............................7,500psi/517bar

Output ........................................ 0.5g per stroke.............................. 0.5g per stroke.............................. 0.8g per stroke

Cartridge type .......................400gm x large thread .................... 400g x large thread.................. 500 or 600g small thread

Screw steel barrel over cartridge, into pump head. Be

careful not to cross thread it. (Note: steel barrel is not

supplied or required for Draper Stock No.16157).

Pump grease gun to ensure grease is coming out of

outlet.

Screw cartridge firmly into pump head in a clockwise

rotation until it stops. Do not over tighten.

Screw outlet nozzle into main pump head in a clockwise

direction until tight. PTFE tape can be used for this joint

if required.

Pump handle to ensure grease is being expelled.

Grease gun is now ready for use.

Use above procedure to exchange grease cartridges. If changing grease types, be sure to clean out face of grease

cartridge mating face and use new grease to expel old grease before use. After initial assembly, there is no need to

remove the nozzle assembly.

DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. drapertools.com e-mail: [email protected]

PJKC0516

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali Draper Utensili

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare